The U disk can t be opened, and double click to show that the disk in drive H is not formatted, what

When using USB flash drive or other disks, a prompt box will appear that the disk is not formatted, and if you format it, the data will be lost. The USB flash drive prompt is not formatted, in fact, the DBR of the disk is damaged, and now it can be repaired with a tool WinHEX without formatting. The reason why the disk is not formatted is because the DBR of the disk is damaged, and each disk will generate a DBR and a backup DBR after formatting, both of which are the same, and can be restored with the backup DBR when the DBR is damaged.

The dbr is in sector 0, and the backup dbr is in sector 6, so we need to restore the backup dbr of sector 6 to the dbr of sector 0, and the disk is not formatted to solve the winhex** address.

First of all: open WinHEX, select Tools - Open Disk, select the disk you want to repair, double click to open the partition, click Position - Jump to sector, enter 6, jump to 6 sector, right-click on C00 there to select the starting position of the selection block, then jump to the seventh sector, after jumping to the 7 sector, press the up button of the keyboard to find 55AA, and click the right button on A - select the end of the selection block.

In this case, if you want to keep the data in the USB flash drive, you must not format it, here you can first ** mini rabbit data recovery software to scan and recover the data in the USB flash drive, and save them in other secure storage devices after recovery.

Reason: The format of the USB flash drive does not match and needs to be formatted to open it.

1. First, right-click on the DataRecovery software and select to run the software as an administrator.

2. After the software runs, all partitions and physical disks will be displayed, here you can directly double-click the G disk that needs to be recovered.

3. Then the software will find the data and put the found files into the folder "G".

4. Check all the files and right-click to copy the files.

5. Then select a suitable path to save the file.

6. Wait for the data to be completely copied.

7. Then open My Computer, right-click on the USB flash drive, and select "Format".

8. Then open the file system and select "fat32", click "Start".

9. After the formatting is completed, you can open the USB flash drive.

If your computer won't turn on after plugging in the USB drive and the error message "The disk in drive h is not formatted" appears, it may be caused by the following reasons:

USB flash drive file system corruption: The USB flash drive's file system may have been corrupted or there may be an error, resulting in the computer being unable to read the data in the USB drive normally. This may be due to overuse of the USB drive, abnormal shutdown of the computer, or virus infection.

USB drive is not mounted correctly: Sometimes, the USB drive may not be mounted correctly, causing the computer to not be able to read its contents properly.

USB drive storage device is damaged: If your USB drive storage device is damaged, your computer may not be able to read the data from the USB drive properly.

Solution: Use a USB flash drive repair tool: Try to use a USB drive repair tool, such as the Windows Disk Check Tool (CHKDSK), to try to fix errors in the USB flash drive file system.

Use data recovery software: If your data is very important, you can try to use data recovery software, such as Recuva, Easeus Data Recovery, etc., to try to recover data from a USB drive.

Replace the USB flash drive storage device: If your USB flash drive storage device has been damaged, you need to replace it with a new USB flash drive storage device.

In either case, you should take steps to address the issue as soon as possible to keep your data safe. Also, before plugging the USB drive into your computer, make sure your computer has been updated and installed with the latest drivers and operating system patches to minimize the occurrence of similar problems.

The new can be done, not the new one, the silver shouting draft suggests that it be checked first, and it can be found to Fengxiao dg to see, to make sure that the file is gone, then do it,

Hello dear. This situation is usually caused by a corruption of the file system of the USB flash drive or a problem with the USB flash drive itself. Here are some possible workarounds:

1.Try plugging in a USB flash drive on another computer to see if it turns on properly. If you can, there is no problem with the USB flash drive itself, and you can try to format the USB flash drive after backing up data on other computers.

2.If you can't open the USB flash drive on other computers, you can try to fix it using the disk management tool. In Windows system, you can press Win+X key, select "Disk Management", find the disk where the USB flash drive is located, right-click to select "Properties", and click the "Check" button in the "Tools" tab to repair.

3.If none of the above methods can solve the problem, you can try to use data recovery software for data recovery. Some data recovery software can identify and recover corrupted files in the morning and thus recover data from the flash drive.

4.If none of the above methods solve the problem, you may need to consider replacing the USB flash drive. <>

Sometimes when we insert a USB flash drive or memory card, it shows formatted disk, and it can't be opened, so what should we do?

1.Right-click "My Computer", select the "Manage" option, click "Disk Management", and view the index of your USB flash drive.

2.In the run window, enter cmd, press enter, and the DOS runtime environment appears.

3.Type diskpart, press enter, another command window will come out below, and then 1Enter selectdisk 1 in the index of your USB flash drive, press enter, enter clean, and then you can clear the space content.

4.When it is done, the computer displays the USB flash drive, but does not display the USB flash drive size. In this case, in the index in the first step, you can see the unreleased space and right-click to create a simple volume to restore the USB flash drive to its original capacity.

It would be nice to re-mass produce the USB flash drive.

Try to see if there is any air welding! Solder it first, if it doesn't work, you should be able to change the crystal oscillator again, that is, the main chip and memory chip are thrown away!

Try to change the computer, if the same situation is that your USB flash drive is broken.

The USB flash drive is broken, and the format is now WAF instead of FAT, which is usually caused by unplugging directly without safe exit.

The appearance of this prompt means that your USB flash drive is not correctly recognized by the system. There are many situations that can cause this problem, so don't rush to format it just yet. There are several reasons for this:

1. Due to the aging of the U disk plug or the U disk jack of the microcomputer, resulting in poor contact of individual contacts, try to change the jack, and then try to change the microcomputer. If the fault persists, the following factors can only be considered.

2. Due to the improper operation of the U disk before, especially when the U disk is still doing read and write operations, it is forcibly unplugged, resulting in an error in the file allocation table of the U disk. In this case, some data recovery software can also be used to recover the contents of the USB flash drive (at least most of them can be recovered). If you don't have important files, you can just choose Format.

3. After the above 2 operations, most of the USB flash drive problems can be solved. If the fault persists, it means that the storage module of the USB flash drive is damaged - replace it with a new one, fortunately, it is not expensive, hehe.

If you don't want the data inside, you can format it, but if you want the data inside, don't format it.

No need to format:

1。Right-click and select Open.

2。Start--Run-- Directly enter the drive letter of the USB flash drive with a colon, e.g. i:

You can go in, and you can kill and kill the virus after you go in.

Poisoned, if there is no important file formatted, it is better to change the machine, if there is one, format it first and then the file is restored.

poisoned, a different computer should be able to turn on. Then antivirus is good.