How to solve the blurring of spectacle lenses and how to deal with the blurring of resin spectacle l

Usually the glasses are dirty, everyone is used to wiping with glasses cloth, in fact, this practice is wrong, glasses cloth is used once or twice, it will be stained with grease, attached to a lot of dust, so wipe glasses, easy to wipe more dirty, more scratches, today teach you the correct way to wipe glasses. 

1. First of all, squeeze a drop of dish soap on the abdomen of the finger and apply it evenly on the glasses, the fingertip is very soft and will not hurt the lens, and the inner and outer lenses should be applied.

2. Then rinse the glasses directly with the faucet, and scrub the lenses with your fingertips a few times during the rinsing process.

3. Finally, turn on the faucet to small water and gently rinse the glasses, so that the dust is thoroughly washed away, and the mirror will not leave water droplets.

When it comes to glasses cloth, its function is not to wipe the lenses, but to put it in the glasses case, which plays a role in protecting the glasses, and you can also give this method to your family and friends, telling them the correct way to clean your glasses. The material of glasses is divided into plastic lenses, glass lenses, PC lenses, crystal lenses, etc., the glasses have been worn for a long time, and when you take off the glasses every once in a while, people will find that the lenses are very dirty and blurry, which may be caused by external dust. During the washing process, do not wash with cold or hot water, because the principle of "thermal expansion and cold contraction" will cause deformation of glasses in the long run.

You only need to dip a little dish soap on the lenses, add a few drops of water, and then gently wipe with a soft cloth, do not rub your fingers hard and repeatedly, then rinse the wiped lenses in warm water, and finally wipe them clean with a clean cloth.

The use of a soft cloth is to prevent the hard substance from rubbing against the lenses and to avoid scratches on the lenses.

Another piece of advice to you is not to use tissue paper, because most of the paper is rough and easy to damage the lenses.

Spectacle lenses should not be wiped directly with hard objects, otherwise the lenses will be worn out.

Also try not to touch it with your hands, otherwise, there will be oil stains on the lenses.

If the lenses have oil or dust, you can spray or apply dish soap, then rinse with clean water, and then blot the water with a napkin or glasses cloth.

There is a coating on the lens, so it is best not to damage it. Washing with water absorption is best. Glasses people know that every time they wear glasses, dust and grease will accumulate on them after a while, and many people will wipe them with eye cloths at this time.

In fact, this practice is not right, because the particles on the lenses, in the process of wiping with a rag, will hurt the lenses, which will cause the more you wipe the more blurred, and after a long time, the glasses will be wasted. So today, I will teach you a trick to make your glasses look brand new and use them for ten more years without a problem.

1. Use dish soap skillfully.

First, rinse the glasses with tap water, then hold the edge of the frame with one hand, dip the dish soap with the thumb of the other hand, stick to both sides of the lens, gently rub it with your fingers, then rinse it with water, and then use a cotton towel or paper towel to absorb the water on the frame. This not only keeps the lenses clean, but also prolongs the life of the glasses.

2. Alcohol anti-fogging.

We all know that the lenses of glasses are very easy to fog up, and lens fogging really affects our lives, especially when you are stir-frying, or when you are riding a bike, it is really dangerous. At this time, you can try to mix alcohol with water, dilute it in a ratio of 1:3, and then dip the glasses cloth in alcohol water and apply it to the lenses, which can ensure that the lenses do not fog up for a long time, which is simple and practical.

3. Storage of glasses.

If we want to make a pair of glasses last longer, we need to protect it well. In ordinary life, when we don't use glasses, don't put the raised side of the lens on the table or other hard objects, so as not to scratch or grind the lens, the lens is best wrapped in a cloth and placed in the glasses case to avoid absorbing dust, in addition, wipe the glasses, we should also clean it regularly.

Wearing glasses to see things blurrily is more common in the following situations:

1. The lens power is not suitable, when myopia, farsightedness, and astigmatism occur, it is necessary to go to the regular ophthalmology department to do a standardized optometry glasses process, and accurate glasses can better correct vision. When the glasses are blurred, it is likely that the prescription of the glasses is not suitable and you need to re-optometry glasses.

2. If the lens is scratched, if the scratch is serious, the lens needs to be replaced.

3. If the interpupillary distance is not suitable, the optical center of the lens is not in the middle of the visual field, which will lead to blurred vision and corrected vision loss.

4. If the refractive power changes, the ophthalmologist should be asked to re-do the optometry and glasses correction.

What should I do if I wear glasses and a mask, and there is a blur of water vapor on the spectacle lenses? There's a solution!

When the lenses are blurred, you can first rinse off the dust on the lenses with clean water, then wash off the oil on the surface of the lenses with neutral dish soap or hand sanitizer, and then rinse them with water.

Because plastic lenses are small in density and soft in texture, they can be damaged inadvertently. For example, the sweat and oil on the face often cause the lenses to blur, and sometimes the more you rub it, the more blurry it becomes. However, if there is recurrent unilateral lens blurring, it is considered that it may be related to increased ocular discharge, and levofloxacin eye drops are recommended for symptomatic use**.

Precautions for the use of resin glasses.

In addition to avoiding scratching high temperatures, coated resin lenses should also avoid acid fumes and other erosion, such as in daily life, it is best not to wear glasses to cook, especially when the ventilation is not good.

At the same time, you should not wear glasses into a hot shower environment, and the lenses should be placed on a protruding side upwards when you are temporarily placed, and the glasses should be put into the box when you carry them, and do not put them in your pocket or bag, which is very easy to make the film abrasion.

In this case, there are three possibilities:

1. If the power of the eye is long, you need to re-optometry and glasses.

2. If the surface of the lens is worn and the film bursts, the lens needs to be replaced.

3. There are too many stains on the lenses, just clean and wipe them.

What do you mean? Is your eyesight getting worse or your lenses wearing. If your eyesight has deteriorated, re-optometry and a new pair of glasses.

If the lenses are worn out, it seems that there is no way. Because polishing will change the diopter of spectacle lenses, resulting in corrected vision deviation, which is not good for the eyes and vision. So let's go get a pair of glasses.

The maintenance principle of plastic lenses is to keep the lenses bright and clean, free from oil stains, and avoid scratches. It is best to rinse the lenses with tap water before wiping them, or you can use neutral soap or special detergents to clean them with clean water. Wash the seams between the frames and gently scrub them with a soft, old toothbrush to remove dirt.

In daily life, the lens should be avoided from contact with high temperature, because at high temperature, the thermal expansion and contraction of the film and the lens substrate will be inconsistent, resulting in damage or even falling off of the film. It is also important to avoid exposing the lens to strong organic solvents such as acetone, ether and perfume, which can affect the finish of the lens surface. In addition, the way to place the glasses should also develop a fixed habit, first wrap the lenses with flannel, and then close the temples, in order to prevent the glasses from being under heavy pressure, the glasses can be placed in a hard glasses storage box.

1. When wearing glasses, do not contact the convex surface of the lens with hard objects, and it is best to store it in the box.

2. Resin lenses should be rinsed with clean water first, then cleaned with a special detergent for resin lenses or a small amount of detergent, and finally wiped dry with a special cloth for resin lenses.

3. Wipe with a special lens cloth for resin lenses, because the ordinary lens cloth is loose and easy to be mixed with sand, which will make the lens wear, so it is best to rinse the lens with water first, and then wipe it dry with a proprietary lens cloth.

In this case, there are three possibilities: First, the power of the eye is long, and you need to re-optometry glasses. Second, the surface of the lens is resistant to Li Li Li wear and burst film, and the lens needs to be replaced. Changsou.

3. There are too many stains on the lenses, so you can clean and wipe them.

Summary. Hello, dear, this is caused by the shortcomings of aspherical lenses, the higher the power of aspherical lenses, the more exposed the shortcomings of aspherical lenses, simply put, the peripheral power of aspherical lenses is lower than the center of the unclear. This is a normal phenomenon.

It can also have a certain effect by artificially adjusting the frame, that is, making the angle distance a little smaller, that is, making the lens closer to the eye, so that when looking at other angles, the eye can pass as much as possible through the center rather than the periphery, which will be much better.

Hello, dear, this is caused by the shortcomings of aspherical lenses, the higher the power of aspherical lenses, the more exposed the shortcomings of aspherical lenses, simply put, the peripheral power of aspherical lenses is lower than the center of the unclear. This is a normal phenomenon. You can remove the skin key and artificially adjust the frame will also have a certain effect, then Luqiao is to grasp the angle distance of the mirror to make it smaller, that is, to make the lens closer to the eye, so that when looking at other angles, the eye passes through the center as much as possible rather than the periphery, which will be much better.

I hope mine is helpful to you, if your problem has been solved, you can click on the upper right corner of the "end service" and give a 5-star like. Click on the avatar to follow me, and if you have any other questions, you can consult me again. Grip punch pie.

1. Clean your glasses.

The first step is to clean the surface of the lens to see exactly where the scratches are. Be sure to use a clean detergent (especially glasses) and a clean microfiber cloth.

2. Apply liniment.

The next step is to apply a scratch remover to the lenses. Start by gently rubbing the scratched lenses with a non-abrasive toothpaste, then gently rubbing them with a cotton swab or cotton ball. To remove the toothpaste, you need to rinse the lenses with cold water.

If the scratches are deep, you may need to repeat the process a few times. Or, if you don't have non-abrasive toothpaste, you can also use baking soda and water. Mix equal parts sparkling water and water until it reaches the same consistency as toothpaste, then apply to the lenses in the same way.

3. Fill in the scratches.

If you still have scratches, you now need to use the scratch filler product.

Spectacle lenses can be cleaned with dish soap. Apply a drop of dish soap to the lenses, apply the dish soap evenly to the lenses with your hands, rinse with water and wipe off oil and dust with your hands. Gently wipe the water off with a paper towel and observe whether the lenses are cleaned with a side light.

Pay attention to the maintenance of spectacle lenses, and do not use crude items to wipe spectacle lenses. <

Spectacle lenses can be cleaned with dish soap. Apply a drop of dish soap to the lenses, apply the dish soap evenly to the lenses with your hands, rinse with water and wipe off oil and dust with your hands. Gently wipe the water off with a paper towel and observe whether the lenses are cleaned with a side light.

Pay attention to the maintenance of spectacle lenses, and do not use crude items to wipe spectacle lenses.