-
1. The grid voltage is too low.
If the grid voltage is too low, the output torque of the motor will not reach the specified value, and the drum will not be able to run.
Solution: When checking, check whether the power supply voltage is normal, if the voltage is too low, you should pause or use the booster to adjust the voltage to the normal value and then turn it on. 2. Too much washing.
Too much washing is placed, exceeding the rated weight and overloading the motor. At this point, you only need to remove some of the washing material to get it going.
3. The transmission belt slips or falls off.
When the transmission belt slips or falls off, the torque of the motor transfer cannot be transmitted to the running parts, which will cause the drum to not rotate.
Solution: Check whether the V-belt is worn or falling off; If so, the transmission belt needs to be replaced, or the motor position needs to be adjusted to make the tightness of the transmission belt suitable for use.
4. The capacitor is damaged.
Washing machines use capacitor to run the motor, when the capacitor is short-circuited, broken, grounded and aged, the motor will not be able to start and run normally.
Solution: Replace the capacitor with a new one of the same specifications, and the motor will start and run normally.
5. The starting winding of the motor is broken.
When the motor starting winding is broken, it will cause the motor to have a "buzzing" sound, but it cannot start normally, at this time, it is necessary to repair or replace the new motor.
6. The drum is stuck by a foreign object.
Check if the drum is stuck with foreign objects and, if so, remove it.
-
That's what it looks like, the program is to simulate the method of washing woolen sweaters by hand (woolen sweaters are soaked in a basin and gently pressed by hand, and the woolen sweaters cannot be rubbed and twisted).
-
The wool washing program of Siemens washing machines is fraudulent.
-
The washing process of wool is slow, similar to rubbing by hand.
This is normal.
-
1.Did you press the start button?
2。Is the water inlet pipe open?
It is difficult for a front-loading washing machine to be overweight.
-
May I ask what you did in the end, I also used Siemens, washed a wool coat, and it didn't move.
-
Hello, Siemens washing machine wash wool sweater does not dehydrate, it should be due to wool shedding caused by the drain valve blocked or stuck caused by impermeability, please check whether the permeable valve is faulty. Or directly call Siemens after-sales door-to-door inspection and maintenance.
-
The reason why a single cashmere sweater can't get rid of water in a fully automatic washing machine is due to unbalanced clothing.
2.When the automatic washing machine is transferred to the dehydration program at the end of washing, due to the amount of laundry washed is too little or too much, the clothes are easy to be biased, and after the dehydration bucket is started, under the action of centrifugal force, the outer barrel of the dehydration bucket will touch the dehydration safety switch, and the control computer will stop the dehydration, and then switch to the automatic water filling program.
3.After the water level reaches the set water level, start the laundry rebalancing program, if it is not yet able to reach the dehydrated laundry balance, the laundry rebalancing program will be repeated several times--- if the dehydration program cannot be carried out, the washing machine will alarm and automatically turn off the power and stop running.
4.When there is a lot of laundry, the solution is to appropriately reduce the number of laundry washed at one time.
5.When there is a shortage of clothes, the solution is to appropriately increase the number of clothes that can be washed at one time.
I hope that the landlord and good people will have a safe life.
-
Siemens washing machines are only drum-based, and drum washing machines are not equipped with suction trays, because they are insensitive to capillary matter because they are in the form of direct discharge of water pumps.
However, sometimes there will be larger dirt that cannot be discharged, which generally accumulates in the lower mouth of the drainage pump. Or check the lower drain for dirt.
-
Siemens drum washing machine is a double-drum washing machine, there is no epilator eliminator, and the hair is generally discharged directly when draining. However, when washing clothes, the drum washing machine can throw a floating hair filter into it to absorb uncleaned hair.
-
No, the lower right corner is the drainage pump, what hairy and the like, can be discharged, all drained, can not be drained on**.
-
Yes, there is a lid in the lower right corner that is opened, and you can see it when you unscrew it.
-
Chip filters? This is what every washing machine brings
-
Does it refer to the chip filter in the lower right corner? Front-loading washing machines are available.
-
OK. The following points need to be noted about the machine washing of wool coats:1
Natural wool has felt shrinkage, which will be felt when rubbed in water, which means that the clothes will become smaller and tighter. 2.Not all wool garments are not washable, wool can be washed after being shrunk or mercerized.
Hope it helps!
Reasons why the washing machine can't put water in and how to deal with it: >>>More
There may be several reasons why the start button of the washing machine does not respond, 1. The socket is not in good contact; >>>More
Buy a Siemens front-loading washing machine!
The drum washing machine is hung high drainage, no matter how far away it can drain water. The original water inlet pipe and drainage pipe are one meter and two long. But you can all lengthen it as needed. >>>More
Which is better, a washing machine or a drum washing machine?
Midea drum washing machine.
There are a lot of small blackheads in the inlet sink. >>>More