How do you remotely control an air conditioner with a remote control wizard?

First of all,Remote control wizard is a remote control software on a mobile phone,If the phone comes with infrared(such as s4),You can install this software directly。 After installation,You can match the remote control first,For example, you want to remotely control Changhong's TV(The electrical appliance is turned on),,You can choose the TV when you add it,Select the brand as Changhong。 Long press that big match button.

If there is a volume or other change on the TV,Stop at this time,Select Backward,Press and hold again to match,You can see that the speed of matching is much slower at this time,Find the signal that makes the electrical appliance react again,Stop matching。 Click on "Test Signal Further" below the button. Test a few more signals here, and if they're all available, you can add them.

If it doesn't work, keep matching.

If your phone doesn't come with infrared and you like this software very much, you can buy one of their accessories, which can be plugged into the phone to learn the remote control. You can also plug the accessory into your mobile phone and use the accessory remote control. However, it seems that this accessory can only be used on OTG-enabled phones.

Redmi supports.

Absolutely hand-hit. Ask for points!!

Take the mobile phone universal air conditioner remote control as an example, and the use method is as follows:

Device: Xiaomi Mi Mix

System: Operating system: MIUI

Software: Universal Air Conditioner.

2. Then click the plus sign on the upper left of the main interface of the universal remote control, as shown in the figure below

3. Find the air conditioner option in the device and click to enter, as shown in the figure below

4. Then find the Haier air conditioner you use in the air conditioning brand menu, as shown in the figure below

5. After that, point the infrared port of the mobile phone at the air conditioner, and click the blue sign in the middle to connect, as shown in the figure below

6. When the universal remote control shows the remote control menu, it means that the connection is successful, so that the air conditioner can be controlled remotely.

Inside the mode flag, you will see that there are many air conditioning modes, which will have snowflakes, water droplets, wind blades, and sun symbols. Snowflakes indicate that it is refrigeration and can be used in summer; The water droplets represent dehumidification, the wind blades are the air supply, and the sun is the heating, which can be used in winter. There is also a timer button on the remote control, which can set the turning time of the air conditioner on and off, which is convenient to use.

There will also be a triangle on the remote control, which is used to adjust the temperature, and the temperature of the air conditioner can be adjusted through this triangle. There is also a button for ventilation on the remote control, and there are two types of ventilation standards, the difference between the two is mainly in the speed of ventilation.

If the remote control is locked, you can directly open the battery cover of the remote control, and then find the small hole to unlock the lock on the top of some function buttons, we press it with a needle or toothpick, and it's OK.

Note: Every time the remote control button is effectively operated, the LCD screen displays the symbol of the transmitted signal "" and disappears after one second. The switch is used to press power on when standby to enter the running state, and press to power off after power on to enter the shutdown standby state.

Gree air conditioner free installation range:

Gree Electric household air conditioners, including split type, vertical cabinet type, ceiling type, and patio type air conditioners, are all free of charge. The installation must be completed within 24 hours from the time of purchase. The free installation fee shall be settled by the special service outlets to Gree Electric Appliances in accordance with the requirements of the "Installation Fee Settlement Management System", and shall not be charged to users.

Hello answer, glad to answer for you! "Step 1: You need to turn on the power switch of the air conditioner first, and find the corresponding ** through the model of the air conditioner**. Step 2: You need to press and hold the setting button on the universal air conditioner remote control, and you need to press and hold it for about three seconds, and then the model of the air conditioner** will be displayed on the display.

Step 3: You need to click the confirm button on the remote control, and then the model** will stop flashing. ”

4. After all the above steps are completed, you can use the universal air conditioner remote control to control the air conditioner.

The whole operation process is relatively simple, and the universal air conditioner remote control will be more convenient to use.

1.Triangle symbols: Auto mode.

Pressing this button means that the air conditioner will automatically cool or heat itself according to the indoor temperature, which is very convenient. Sun Symbol: Heating mode.

When we see the sun, we think of the warm sun, so this key is exactly like this, it is the key to heat the air conditioner, the upward symbol is heating, and the temperature rises by one degree when you press it, and the downward symbol is just the opposite. Air conditioner remote control icon of snowflakes, raindrops.

2.Snowflake symbol: Refrigeration mode.

Snowflakes, looking a little bit of winter, go without saying, it is the button of refrigeration, the downward symbol is pressed once the temperature is lowered by one degree, and the upward symbol is just the opposite. Raindrop Symbol: Defrost Mode.

It is close to the mode under the snowflake symbol, but the fan in the air conditioner in the defrost mode is running at a low speed, and the working time is not continuous. Air conditioner remote control icon Hot Wheels, five-pointed star.

3.There's also a symbol that looks like Hot Wheels: Ventilation Mode. After pressing this button, only the fan of the indoor unit is still working, which is for ventilation at this time.

It's good to understand English, on off yellow is the power switch, the right temp is up and down temperature adjustment, mode is the mode, fan is the wind, powerful is strong.

Now the remote control shows snowflakes, which means that the cooling is 25 degrees, and the wind speed is 4 blocks medium size.

1. Preliminarily open the first presentation page of the 'Remote Control Elf', to add control, the top row is the shape of the air conditioner, click on this form.

2. Find the brand used by the grandson in the white page, or find it on the first page, and then press it into the corresponding word position.

3. Then hold the device close to the air conditioner, then align it, and click the red button in the circle button on the left side of this page to turn it on.

4. There is also a word 'mode' in the circle at the right end, which can be converted with this, such as dehumidification, air supply, etc., according to your needs to adjust, and the degree can be set for half a turn.

5. There is also a blue sound mark on the right side, press this box to say the sound, it will be recognized in the control, and directly say the mode word, such as cooling, it will be teleported, and the rendering will be completed.

First of all, open the "Practical Finger Leg Zen Tool" on the desktop, select "Smart Remote Control", and then "Add Remote Control", select the type of remote control in it, and calibrate it after selecting to use infrared.

functional. Here's how:

1. Find "Tools" in our mobile phone

2. Select "Smart Remote Control" in the tool

3. After clicking in, click "Add Remote Control" in the middle

4. After entering Weichen to select the type of remote control, you can see that you can choose "TV", "Hunger Air Conditioner", and "Projector".

Wait. <>

5. Click to select "Air Conditioner", select the brand of air conditioner, and then calibrate the infrared.

6. After calibration, we can control the air conditioner through our mobile phone.

The steps of the iPhone Remote Control Genie remote control air conditioner are as follows:

2. Then open the remote control wizard and click on the option to select the air conditioner, as shown in the figure below;

3. After completing the previous step, the following interface will pop up, allowing you to select the air conditioner brand, and select the air conditioner brand at home. The operation is demonstrated by Gree air conditioner, as shown in the figure below;

4. After choosing, you can remotely control the air conditioner at home. Tap the power switch in the red box to turn on the air conditioner. You can adjust the temperature and other operations according to your own needs, as shown in the figure below;

Remote control wizard ios version is a mobile phone universal remote control software produced by Tianjia Information Technology****。 Nowadays, most people have LCD TVs and air conditioners installed in their homes, and when we play with our mobile phones, we want to use our mobile phones to remotely control them. Sometimes the remote control is broken or lost, and it is troublesome to match a new one, how to use the remote control wizard at this time?

System tool size: Version:

Install the remote control wizard to your phone and choose the brand of TV or air conditioner you want to remote control to match.

After the match is successful, select the scene such as; Living room If the mobile phone prompts to receive an infrared signal, it means that it can be remotely controlled.

How to use the remote control of Gree air conditioner**As follows:

1. Triangle symbol: It is represented as an automatic mode, and the air conditioner will automatically refrigerate or heat according to the indoor temperature.

2. Sun symbol: heating mode, air conditioner for heating work.

3. Raindrop symbol: defrost mode, dry world key air conditioner defrost work, in fact, it is the refrigeration working mode, but the fan speed of the indoor unit is low, and the working time is intermittent work.

4. Snowflake symbol: refrigeration mode, air conditioner for refrigeration work.

5. Symbol similar to Hot Wheels: ventilation mode, only the fan of the indoor unit works, and the ventilation is exchanged for jujube gas.

6. The pentagram is the sleep mode.

7. The symbol of the four arrows facing one direction is the wind direction rotation function button, press the button to select the appropriate wind direction.

Other function buttons for the air conditioner remote control.

OK—OK.

set—Setting.

temp—temperature.

reset—Reset.

light—a flashlight.

dry—Dry mode.

sleep—Sleep mode.

auto—Auto mode. Not coincidentally.

quiet—Quiet mode.

clock—A clock with an alarm clock icon.

powerful—Powerful mode.

Press the function mode button on the remote control to select the work and dust mode you need, adjust the refrigeration in summer, adjust the heat in winter, and then adjust the temperature according to your needs.

It can be installed and used directly on mobile phones that support infrared function. If the mobile phone does not have infrared function, but has OTG function, it can be used with remote control wizard OTG accessories. The app comes with tens of thousands of remote control data, and most of the remote controls can be used directly by sneaking back and forth to match the remote control or search for the model.

The app has a TV program forecast function, which can preview the current viewing program information and the program forecast for the next two days. The box function of the app can be used to connect the home TV box to the mobile phone wifi, and the user can manage the application of the box on the mobile phone.