Is it possible to set the virtual memory on the F drive?

to set up virtual memory.

1. The memory setting is mainly based on the size of your memory and the purpose of the computer. The so-called virtual memory is to use a part of the hard disk space as memory when your physical memory is not enough, but because the speed of hard disk transfer is much slower than the memory transfer speed, the use of virtual memory is slower than physical memory. The value that the individual actually needs should be adjusted many times by himself.

If you set it too much, it will cause a lot of debris, which will seriously affect the speed of the system, and if it is too small, it will not be enough, so the system will prompt you that the virtual memory is too small.

2. In general, Windows can be used to automatically allocate and manage virtual memory, and it can dynamically adjust the size of virtual memory according to the actual memory usage.

3. Define virtual memory, the general default virtual memory size is to take a range value, it is best to give it a fixed value, so that it is not easy to produce disk fragmentation, the specific value is determined according to the size of your physical memory, generally a multiple of the physical memory; However, the minimum value can be set to a multiple of the physical memory, and the maximum value can be 2-3 times the physical memory.

4. It is best not to set the memory in the same partition as the system, the memory is dynamically changed with the use, and the C disk is easy to produce disk fragmentation, which affects the running speed of the system, so it is best to set the virtual memory in the disk in other partitions with large remaining disk space and not commonly used disks, such as D and F, so as to avoid the system from carrying out frequent read and write operations in this partition and affecting the system speed. Pseudo-memory can only be one in a computer and can be placed in any partition of the disk.

5. The method of setting virtual memory is: right-click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual Memory Change - Click on C disk - select "No paging file (N)" - Settings, then the virtual memory next to C disk will disappear; Then select the D drive, select "Custom Size" - enter the values in the "Initial Size" and "Maximum" text boxes below - "Settings" - OK - Restart, and the setting is completed.

OK. Right-click on my computer, Properties, Advanced, Performance, Settings, Advanced, Virtual Memory, Change, Select F disk, change the ,,, 500m 1g below.

It's nothing... The space of the F disk will be 500m less 1g

Don't do ......

The computer always prompts"The virtual memory is insufficient"And your computer is slowing down, it could be that your computer has a virus or other malware!

It is possible to set the virtual memory on the F drive, and it will not affect the F drive.

1. Usually, the system will put the virtual partition on the system disk, and usually, we will install the system on the C disk. So it's generally in the C drive.

2. However, the C disk has a capacity limit, and all the things are placed in the C disk, which may not be enough. At this time, it is necessary to consider placing it on other disks.

3. Suppose your physical memory is 2G, usually the virtual memory will be between 2 and 4G, look at your C drive, and how big it is.

4. If your physical memory is too small and you want to use large virtual memory to achieve smooth operation, it is recommended that you do not do so. Because of the frequent reading and writing of the hard disk, the hard disk will soon have bad sectors, and the gains outweigh the losses.

5. Virtual memory will frequently read and write to your hard disk partitions, if your four disks C drive is no longer enough, then it is recommended that you put it in a partition that you usually do not use, such as E disk. The F drive is stored as a backup file, even if there is a bad sector, try not to damage the location where the backup file is written.

Good luck.

C disk put the system, D disk put the installation files, EF disk put the entertainment files, the virtual memory is also put on the D disk, the system disk is as simple as possible.

Categories: Computer Network >> Operating System Failures.

Problem description: What is the maximum and minimum value? My machine is 256, there are four CDF disks, and I have 370-1024 virtual memory in the EF disk, right? I'm comparing dishes, so please explain it to me in more detail.

Analysis: Not good!

Let's start with a brief understanding of the concept of virtual memory.

To put it simply, the system in order to ensure that the data required by the program is read quickly and effectively, and the files that are called, the data or files that are temporarily not used in the physical memory are stored in a certain area of the hard disk, so that this part of the thing can be called directly from this area when in use.

If you set it up like this, the system will frequently read and write to the hard disk when reading the data in the virtual memory, which will not only increase the workload of the hard disk, but also cause the hard disk to fail in the long run, and more CPU usage of the system will be used to "find", resulting in the system running slower or even becoming a card.

I don't know if you understand that.

Try to set the virtual memory in one partition as much as possible, and in order to run faster, you can set the virtual memory in a different partition, or simply divide it out.

Take a look at the specifics here, there are ** and instructions:

mywg/site/win/2006-04-26/

Virtual memory. It can be set on any disk, as long as there is space left on this disk. However, virtual memory is best for system hosting.

1. With the continuous increase of the available memory of the computer, it is becoming less and less important to hit the virtual memory, and it is generally not necessary to care about it, and it is best to let the system be hosted.

2. But to note the meaning of the group Zen, C disk.

Don't fill it up too much, leave some room for the virtual memory of the page file.

3. The general capacity of virtual memory is physical memory.

times. Virtual memory is also known as virtual memory

memory）。Programs running on a computer need to be executed through memory, and if the program is executed that takes up a lot of memory or a lot, it will cause the memory to be depleted. To solve this problem, virtual memory technology is used in Windows, that is, a portion of the hard disk space is used as memory usage.

When the memory is depleted, the computer will automatically call the hard disk to act as memory to relieve the strain on memory. RAM required for computer running programs or operations.

RAM) is insufficient.

windows

It is compensated with virtual memory. It combines your computer's RAM with the temporary space on your hard drive. When RAM runs slowly, it moves data from RAM into a space called a "paging file".

Moving data into a paging file frees up RAM so you can get the job done.

Virtual memory is a storage function that replaces physical memory, but cannot replace the running function of physical memory. So, generally speaking, the larger the RAM capacity of the computer, the faster the program will run. If your computer's rate is slowed down due to lack of RAM available space, you can try to compensate by adding virtual memory.

However, the rate at which a computer crashes and reads data from RAM is faster than that at which it reads data from a hard drive, increasing the RAM capacity (with the addition of memory modules).

is the best choice.

You can set any partition outside of C.

Generally, it is set to 2 times the physical memory of the eggplant difference.

However, you are playing the game prompt that the memory is low.

It's not a problem with the virtual memory.

It's that your memory 256 is too small.

Upgrades are recommended.

Yes, how to do it: right-click on my computer--- properties, round and thick, --- advanced--- first performance setting--- advanced--- change --- select the drive letter you want to set--- select "custom size" - enter the ideal value --- determine --- restart the computer.

Once you're in the system, you'll see that your changes have been effected.

Added: The initial size is recommended to be 3072

It is recommended to set the maximum value to 6144

The general virtual memory is not set in C, so it is easy to get stuck, the effect is not good, you can celebrate the number of dates in D, E

F plate, a 256 of you set the obstacle stool socks first 800 to 1000 on it.

You can argue in the air, my computer clicks on the right health - properties - advanced - performance - settings - advanced - virtual memory - change, set the c drive to no paging file, and then set it on the disk you want. 256 is generally set to 2 times the physical memory. However, the virtual performance is worse than the physical one, and it is recommended that you buy a strip of one g, which is only more than 200, right?

The performance change is absolutely visible to the eye.

First of all, you need to know how much space you have left on each disk, and the virtual memory is to deduct the value of your custom size from the disk you set. Your configuration system will generate 1G virtual memory in your C disk by default, which is not good, so do what I said.

First of all, right-click on my computer -> Properties -> Advanced -> Performance "Settings" -> Advanced -> Virtual Memory "Change" -> select a custom size, select No paging file after opening - Settings, and then select the disk with more space you have left, for example, d has more than 20g left, and then customize the size, I will choose the minimum 2000, the maximum 3000, and then set, OK, restart it.

Right-click on My Computer -> Properties -> Advanced -> Performance Settings -> Advanced -> Virtual Memory Changes -> select a custom size.

The initial value is 768

The maximum value is 1024.

Click again. Settings

OK OK OK.

Here's why it's "768" - 1024.

It is generally set according to the size of your memory module, which is double to 2 times the size of your memory module.

If you have a large memory module, you don't need to set it very high, because this is set to prevent problems caused by too small memory.

The above methods can be set. It would be nice to set the virtual memory to a multiple of the physical memory.