-
First, change the card reader to see, and second, if you are using an extension cable, please do not use the socket on the back of the motherboard, if not, format it first, and then use finfmyphotos to recover your deleted photos.
-
Right-click Open With - Select how to open the folder.
If it doesn't work, take the USB flash drive to another computer to try it, and if it doesn't work, the USB flash drive is broken, if it works, then do it.
Press the DEL button to enter the BIOS at boot, and allow the slave disk to be on the line.
-
See if there's something wrong with the memory card.
Also, right-click on the properties to see what format the card is now?
If it has become an unknown or raw format, you need to recover the ** inside through data recovery software, do not operate on the card easily, which is easy to cause data loss!
-
My SD card is placed in the phone** can't be displayed, and it can't be formatted, what should I do,,, hurry, hurry...
-
It is recommended that you use a card reader to put it on your computer and right-click on the disk of the SD card.
Go to Open If it doesn't work, use Resource Management to open it and try it out.
-
It doesn't work even if it's formatted.
This is the channel is damaged, if there are no very important files, forget it, don't fix the channel.
If you have a very important file, you can go to the place where the computer is repaired to detect that the channel can be repaired, but the cost is enough to buy you more than a dozen SD cards.
So it depends.
Doesn't it need to be fixed?
-
Downtime for maintenance today. There is an announcement on the official website, and you can go back to it at 18:00.
-
It's your card that's faulty, get the card down, find an eraser to wipe the contact points.
-
New is not the same as good.
-
Summary. Hello, I'm glad to answer for you, the SD card interface is dirty. Some netizens do not pay attention to the maintenance of the memory card when using the memory card of the mobile phone, which makes the metal area of the SD card contaminated with dust and dirt, which will cause the SD card to be in poor contact with the card slot, resulting in the SD card cannot be read.
The solution is very simple, take an eraser and erase the metal part of the SD card, and try again to see if it can be read. Second, the SD card slot of the mobile phone is squeezed with the battery. In order to cater to the public, the major mobile phone manufacturers are pursuing ultra-thin models, and the design of the card slot is becoming more and more ingenious.
If you are not using the original mobile phone battery, due to the inconsistency of thickness and height, it will cause the battery to squeeze the card slot, and the SD card will not be readable. If this is the case, all you have to do is to replace it with an original battery, which you can buy from the phone manufacturer. Please pay attention to protection during the epidemic!
I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!
I'm sorry I don't understand, but can you elaborate on that?
Hello, I'm glad to answer for you, the SD card interface is dirty. Some netizens do not pay attention to the maintenance of the memory card when using the mobile phone memory card, which makes the metal shed of the SD card contaminated with dust and dirt, which will cause the SD card to be in poor contact with the card slot, resulting in the SD card cannot be read. The solution is very simple, take an eraser and erase the metal part of the SD card, and try again to see if it can be read.
Second, the SD card slot of the mobile phone is squeezed with the battery. In order to cater to the public, the major mobile phone manufacturers are pursuing ultra-thin models, and the design of the card slot is becoming more and more ingenious. If you are not using the original mobile phone battery, due to the inconsistency of thickness and height, it will cause the battery to squeeze the card slot, and the SD card will not be readable.
If this is the case, all you have to do is to replace it with an original battery, which you can buy from the phone manufacturer. Please pay attention to protection during the epidemic! I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!
-
It is recommended to try it back to Nokia's phone, if it still can't be read by the master, the card may be crushed in your pocket or broken when you remove the phone. If you want to find a way to fix it, die this heart! I used to have one that I couldn't read, and finally gave up.
Here's a reminder; After the memory card is removed, it should be packed in a box, and do not press anything down.
-
Yes, it can't be opened on the computer, but it can still be used on the mobile phone, and the computer is just a mobile hard drive, and everything in it is wooden? If so, then decisively change the card reader! Don't burn the card.
-
Format it, there is a problem with the memory card, or you have set a password on other mobile phones before, cancel it
-
I've just had a problem like yours too! Your memory card must have a password set on your phone! If you set a password, you can't open it on the computer.@ Use your phone to cancel the password you set! Remember to give points.
-
Hey,It's estimated to be ruined.,Last time I had a USB flash drive.,It's also ruined like this.,When it prompts you that you can't stop the universal volume.,Close all applications and folders first.,Then pull it out.。
-
The memory card cannot be repaired. At most, it's to format it to see if it can be used. Generally, if the memory card is bad, the memory inside will be reduced.
If it's really formatted, it's not enough.
Then it's just a matter of getting a new one
-
It's not possible that you've been poisoned, but it's true, have you encrypted your memory card before? If you want to continue to use it normally, how to say it, you have to do a lot of steps on the computer, I have also done it before, and it is recommended not to use this flash memory card.
-
The memory card is corrupted and can only be formatted.
If it shows that the format failed, then the only thing you have to do is to change the memory card.
-
Judging from the ** you sent, those in your memory card are all shortcuts, and the files that these shortcuts point to do not exist, so they can't be opened! In your case, it doesn't look like it's poisoned, it's caused by your mistake (you selected "Paste shortcut (S)" when pasting, and the correct one should be "Paste (P)"), that is, the file you want to copy is not copied to your memory card, so it can't be opened.
-
This situation is generally because the format of the memory card has changed (the most common format is fat32, and yours may not be anymore), which is called a software and hardware error in the industry, and there is currently no good tool to fix it. Will use it.
-
Formatting is also useless. Sometimes the display is formatted. Actually, it can't be formatted at all. It's possible that your card reader is broken. If not, the memory card is broken.
-
It's poisoned, it's normal, it can be opened on the computer, and it's okay to format the memory card on the computer.
-
Put it on the computer and delete all of them. exe file, then open my computer - Tools - Folder options - Show all folders and files - OK - CTRL+A to select all folders - Single right click - Properties - Remove the green dot in front of the hide - OK, so you can open it.
Another scenario: my computer – right-click – just turn it on.
-
You try to change your phone, or use a card reader to connect to the computer to see if it can be opened, it may be a problem with the mobile phone, and if it can't be opened, the memory card is broken.
-
I've encountered this phenomenon many times. It can't be said that the card reader is bad. But it can be determined that the card reader and the memory card are not in contact.
Good caused. It's best to change to a special card reader, such as SD card reader, you are equipped with a card sleeve + TF card synthesis SD card, it will cause poor contact and the phenomenon you said...
-
If there is no important data in the card. It's better to lose the card. The quality is not good.
If you want to recover SD card data. It is recommended to use the Anyi data recovery software. Scan to try.
-
There is a problem with the SD card, it may be the loss of the partition table or a physical failure, the quality of the current low-cost SD card is really not good, it is best to choose a well-known brand or a slightly higher one.
-
There are three possibilities:
1. It may be that the SD card is full. I can't fit it. It is recommended that the landlord delete the file. Leave room for file copies.
2. It may be that the write protection switch of the SD card is turned on. Generally, SD cards have a write-protect switch on them. It is recommended that the landlord check the switch.
3. It may be that the code in the SD card has been poisoned. Storage device in case of poisoning and delayed search. Copies of documents may be automatically denied. It is recommended that the landlord format the SD card.
-
The Suohuai feast is set, right? The SD card has a liquid infiltration writing protection switch, and if the lead buried silver is dialed to the protection position, it cannot be written.
It's also possible that the card is broken and can't be written.
This is a normal problem that is very easy to occur in the computer, many card readers and USB flash drives have this problem, the last time a Patriot's USB flash drive, on the spot to get a computer can be turned on normally, and the other can not be opened, you can back up the data to the computer that can be opened and then change to another brand of memory card or USB flash drive copy use.
Or: Enter in the ledger.
echo off >>>More
Opening method: 1. Use chopsticks to open the lid and lock the lid Pressing down hard to press it into place, and then rotate it to the opening position to open the lid to open it. >>>More
It is recommended that you read more healthy books, do more exercise, to divert your attention, and add psychological counseling to adjust slowly.
<>2. Install and run the DXF documenter, click the "Open" button, you can select the "Enable Preview" button to preview the DXF document you want to view; >>>More