It s a blue screen again, is there any master who can point it out.,It s been two days since I bough

Troubleshoot Stop 0x9f error messages in Windows.

The "Stop 0x0000009f Driver Power State Failure" error message may appear in Windows.

Cause This issue occurs when the driver does not properly handle the power state transition request. This error message mostly occurs during one of the following operations:

Shut down, suspend or resume from standby mode.

Suspend or resume from hibernate mode.

Solution To avoid this error message, update or remove the driver that is causing the problem. This issue is not limited to device drivers, it can also occur in file system filter drivers (for example, drivers installed by antivirus, remote control, or backup programs). To find out which driver is causing the problem, use the following steps:

1.Check to make sure your computer and all devices are on the Hardware Compatibility List (HCL) and have drivers that are WHQL signed and certified. You can use to check for unsigned drivers.

2.Check for driver updates that may be available for your hardware.

3.Update software that uses filter drivers (for example, antivirus, remote control, and backup software).

4.Uninstall all non-critical devices and software to help identify which devices may be causing this issue software.

5.Install Windows into a new folder. Add a driver and reboot to continue looking for the driver causing this issue.

That's the graphics card poisoned, right, your problem is generally poisoned, and the current computer configuration is basically no problem, it is recommended to uninstall the graphics card driver first, and then reinstall the graphics card driver, and then kill the virus completely.

Hardware failure or driver failure.

Turn off the power, turn on the case, unplug the memory, use an eraser to erase the metal strip of the memory (that is, the gold finger), and insert the memory into a different memory slot.

The problem should be solved.

The solution to the computer blue screen is software first and then hardware, and there are generally more software problems.

1. The last correct configuration: press the F8 key before booting up and entering the operating system, select "Last correct configuration" and press Enter.

2. Safe mode: If the "last correct configuration" does not solve the problem, press F8 when you boot up, enter the safe mode, use software such as 360 to repair the system files, and check for viruses.

3. If it can't be repaired, you can enter the safe mode for system restoration.

4. None of the above methods work, and it is recommended to do the following:

Desktop host: 1) Power off, open the chassis, plug and unplug the memory, wipe the gold finger part with an eraser, and plug it back in (don't reverse it).

2) Plug and unplug the graphics card, wipe the gold finger part with an eraser, and reinsert it tightly (the buckle should be buckled).

3) Unplug the power cord, cut off the motherboard button battery, wait three minutes, and then replace the motherboard.

Laptop:

1) Unplug the power cord, remove the battery, open the back cover of the memory, plug in and unplug the memory, wipe the gold finger part with an eraser, and plug it back in (don't reverse it).

2) Unplug the power cord, remove the battery, and press and hold the power button for 30 seconds without letting go.

3) If the fault persists, you can only reinstall the system.

System and hardware reasons can cause blue screens, it is recommended to restart, and you can't take down the memory and erase it with an eraser to see if you restart.

That is, there is a problem with the system Reinstall the system Generally, the blue screen is caused by the mismatch between the hardware driver and the system, but it is not excluded that there are other situations Next time this situation occurs The complete error will be copied down to Microsoft's official search There should be results.

Let's reinstall the system.

There are many reasons for the blue screen.

It doesn't have to be a hardware issue.

And then the ** can be checked.

For such a configuration, please install the system with the installation version, do not install it with ghost, and then it may be that the data cable does not match.

If it's an accidental blue screen, you can restart it directly 77+568 If you often have a blue screen, you have to check it.

1 Hardware incompatibility, this only appears on the assembly machine, this reason can generally be ruled out.

2 The hardware temperature is too high, this one can:

1 Clean the dust from the chassis and replace the silicone grease for the CPU cooler.

2 See if the fan is still rotating, and replace or repair the fan if it doesn't rotate.

4 Place the chassis in a cool, dry, and slowly ventilated place.

May my answer solve your worries.

First, it may be that your graphics card is not compatible with the lock and the blue screen is caused by suspicion, it is recommended that you uninstall the graphics card driver in safe mode and install the driver on the drive disk that came with your computer's graphics card.

Second, it may be caused by software conflict locks, you can adjust the hardware acceleration to the maximum or minimum --- Desktop - Right-click - Properties - Advanced Options.

Third, if the above can solve your blue screen, I recommend that you install Tencent Computer Manager Yu Pengyin, conduct a safety check-up, and remove the system precipitation garbage (because system garbage may also cause your computer to crash and blue screen).

Fourth, in the installation driver, you can open the Tencent PC Manager --- Toolbox--- Hardware Detection - Install Driver, and Tencent PC Manager will automatically retrieve the latest driver of your computer hardware to ensure the normal use of your computer driver.

If you are not satisfied with my answer, you can continue to ask questions or give valuable comments, thank you.

Whether it is a desktop or a notebook, it is estimated that the temperature is over.