How do I fix my hardware that has been damaged by water?

1.Don't just turn on and off the machine sounds like common sense, but the equipment that gets water must first cut off the main power supply to see what plug should be unplugged, otherwise the continuous current will damage the circuit board and driver of the device, and even make people electrocuted. If this hurricane causes your home to be flooded by several feet, there must be moisture pooling or condensation inside the case.

If it is completely submerged, as long as the chassis is powered on, you have to bother the power supply company to solve it, and at this time, you still don't hesitate to electrocute to death for just one piece of equipment. For small devices, there is no need to move its power button, because turning on the device before the water dries may cause a short circuit in the device. 2.

After doing everything you can to blow dry it and move the device to a dry place, you can contact a professional repair point to see if your local files are missing, and if necessary, you can drive the recovery function to dig out the corrupted data in the hardware; If you plan to do it yourself, blow dry the device first, if it is a sealed Apple laptop and laptop, it is still not recommended to do it yourself. You can disassemble the equipment, use a hair dryer and natural air to dry, there are generally residues, salts, etc. left on the surface of the machine parts, it is recommended to buy a special cleaner for circuit work, and then wipe the cleaner with a soft toothbrush after drying; Then find an air compression tank and squeeze out the residue inside. 3.

If you always feel that the corrosion speed is not dry, it may be that the corrosion speed after water is faster than the speed of your blowing, and the only thing you can do at this time is to reply to the data as soon as possible (the data is not urgent, there is no major danger, it is not recommended), but some people will object, thinking that it is not appropriate to use any diagnostic or recovery tools at this time, mainly depending on the actual situation. 4.If the mobile phone is firmly immersed in water and becomes a "brick", first open the back cover, remove the battery, dry the surface moisture, find a large plastic container filled with raw rice, bury the mobile phone completely inside, and dry it aside for a few days, at this time, the rice can act as a desiccant to naturally absorb the moisture inside the mobile phone, and charge it after taking it out of the rice to see if it can still work properly, the author of this article Brian Proffitt has tried a lot of Android phones that have completely fallen into the water using this method.

Immediately cut off the power and blow dry with a hair dryer.

1. First of all, after a piece of hardware on your computer is wet, don't move the computer, and don't turn it off and on, because you may also generate current in the process of turning on and shutting down, which will hurt other equipment. Destroy the hardware on this computer.

2. After thinking about drying these water sources, and then whether the hardware of the hard disk is stained with water, it is best to try to copy the data on it, and then use some equipment hair dryers and the like to dry it, if the water is not a lot, use some detergent to remove it, and use some absorbent things to absorb the water above, of course, it depends on the equipment you have to remove the water as quickly as possible.

3. Because these hardware are all iron, if your water has not been cleaned, it will oxidize and corrode and rust. Therefore, clean water should be removed as quickly as possible to prevent the electronic components from corroding off later. This will probably end up with your hardware going dead.

Like some computer hardware, it is basically possible to go through the above operation, but many people will accidentally drop the phone in the water, if it falls in the water, it is recommended that you remove your battery first, and clean up the water in time. Then bury your phone in your rice bowl so that after a few days, you're taking it out and seeing if it still works.