Ask for KINGSTORE UD6809U mass production tools!

I had the same issue with my USB stick last month. I did it this way, you can try it:

Open Control Panel, Administrative Tools, Computer Management, Storage, Disk Management, and the interface will appear.

Right-click Disk 1, select Initialize Disk, and click OK. After the initialization is complete, the state of the USB flash drive changes to the Online state.

Right-click on the white box on the right, select "New Disk Partition", enter the New Disk Partition Wizard, click Next, select the partition type (primary disk partition, extended disk partition, or logical drive), and generally select the primary disk partition.

Next step - assign a drive letter (or not).

Next - Select "Format this disk partition as set below" to set the format of the format (file system type, allocation unit size, volume label) (do not select Quick Format).

Next - Successfully complete the Format Wizard. Click Finish and wait for its formatting to complete.

After the formatting is completed, the status of the USB flash drive is displayed as "Good", that is, it is done.

This repair method can generally restore the USB flash drive. However, this repair method also has a drawback, that is, it cannot recover the original data on the USB flash drive. If the original data on the USB flash drive is not very important, this method is more useful.

If there are very important files on the USB flash drive that must be recovered, it is recommended to go to a professional company. Nowadays, there are basically professional companies that do data recovery in major cities. Hope to solve your problem.

Kingstore UD6809 Mass Production Tools Edition You can try.

And there is 1From the U disk manufacturer**, the general master control developer gives them the master control. 2.From the master control developer**. 3.search, including the web and here 4Call ** or email to ask.

I'll give you a ** here, you go up and take a look.

Pretty good.

The mass production tools and tutorials have been sent to you. The tutorial is in Chinese, and the mass production tool is in English (newer than the tutorial).

It is recommended to use a tool to make a boot disk.

What do you do with mass production, it's easy to break the U disk, directly use the unetbootin software, write the image to the U disk, but the premise is that your U disk must support HDD boot Some U disks are not supported There are many tutorials on the Internet using unetbootin, and Duotri can use it.

I'll give you one. Yahoo Mail to you. It's fine, but I didn't succeed with that.

Go and find the model of this chip, and you can't use mass production tools indiscriminately. To pair the model of the chip** There is also a lack of rent, which is the disadvantage of looking at the version of the mass production tool. Try to find relatively new production tools that don't work to go to "Fifth Drive", where you don't need to register.

Also, the chip model tested by the chip wizard may not be correct, so you need to take the USB disk apart and see that there is a square inside is the chip.

Be patient when looking for mass production tools, confirm the chip model and you will definitely be able to find mass production tools, remember that only mass production tools can be mass-produced if they identify the USB disk.

There are various versions, how can I send them to you?