KRAIBURG CPV750 machining center: Who knows how?

Later, I can send you a copy of the corresponding information.

It's okay, my original field used KRAIBER's, which was made in Shanghai, and I used it for more than seven years, and there were no major problems. Good quality. After-sales this is based on customer requirements, this can be negotiated.

I know that the processing of aluminum and 45 steel, the processing of the former F800 S4500, the processing of the latter, F500 S3000, the premise of using carbide steel cutters, if you use the cutting of high-speed steel, the former F200S700, the processing of the latter, F100 S500, if you don't understand, you can ask me.

"Baikai" brand series parking lock is used for car parking space, which can effectively prevent other vehicles from occupying the parking space, truly realize 24-hour care for your parking space, and always provide a warm home for your car. The product is simple to install, easy to use, and has the advantages of anti-collision, anti-vandalism, reset alarm, automatic locking, low failure rate, and intelligent protection.

Design Concept. The design ---"Bokai"The parking space lock pays attention to the traditional concept of Chinese in appearance, and the shape and color look atmospheric and luxurious.

Smart lock--- parking lock is forcibly pressed down or hit, the parking lock emits an alarm sound, and the motherboard detects whether the external force is terminated until the parking lock is reset.

Waterproof design ---"Bokai"The waterproof motor and electronic control system of the transmission part of the parking space lock are waterproof sealed, so that the parking space lock can still work normally in the rain-soaked state.

In order to reduce the friction of the product and improve the stability of the product--- the parking lock produced by our company adopts bearing transmission.

The anti-theft design --- built-in mounting screws, and no one can disassemble the parking lock except for the user himself who can open it with a key.

Push-pumping power ---"Bokai"The parking lock is the only push-pull power supply design in the parking lock industry, which avoids the short circuit of the product caused by the user connecting the electrodes when installing the battery.

Anti-counterfeiting design ---"Bokai"The internal mold opening accessories of the parking space lock are printed"Bokai Electromechanical"wording for easy identification by customers.

What you are asking is, "If I make a machining center, do I need to take any certificate?" ”

It's not right for you to think so, you can make a machining center without a certificate.

It should be what certificates you need to take in the CNC industry, there are CNC skill level certificates, such as CNC lathe intermediate skill certificates, and advanced. There is also a certificate from CNC.

You have to have a certain level of proficiency in the workpiece processing process and programming

These two aspects are very different, right? The production and processing center refers to the production of hardware equipment, which is mainly the domestic equipment manufacturers, such as Shenyang machine tool, Dalian machine tool, large and small, well-known and unknown thousands; If it is engaged in the operation of a machining center, it is an enterprise, and the scope of this refers to a wide range. If you look at the future and development space, it still depends on whether you have rich practical experience?

See what you like. The operator is idle, and the manufacturing is tired, but it is not boring, but it is boring after ten years, I am doing this, tired.

If you just want to draw or learn automatic programming, choose Mastercam, want to learn design and development, choose ug is the most suitable, UG is powerful, but it is much more difficult than ordinary software, it depends on what you want to do UG contains all the functions of other software, I think it is more appropriate to learn UG.

You have to learn the machining process before you can think about anything else. This is the foundation. The software is best or UG, if you pass the UG + process, where to go is the master level.

Use Pro E for it.

Combined with CAD to produce engineering drawings.

Mastercam is fine, CAD is just drawing, if you are engaged in design, you can, but Mastercam is an automatic survival program that you can automatically survive as long as you draw a sketch.

The software is all on its own, and it is true that you have the opportunity to learn more about the craft.