What should I do if my iPhone can t connect to the wireless at home?

Possible reasons and solutions for Apple mobile phone not connecting to wifi network:

1.First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

Apple's mobile phone may not be connected to its own wireless network, you check if it is a problem with your phone, and then restart it, if there is no problem, then go in and check your router.

Can other mobile phones in the family be connected, is this one the only phone that has a problem?

Could it be that the router is broken or the broadband is in arrears?

Apple's mobile phone can't connect to the wireless network at home is likely to be Apple's own wifi setting problem, you can choose in the case of the mobile phone's wireless network, and then set up, which is to automatically obtain the IP address.

1. After connecting to wifi, find that there is no Internet connection, first confirm whether others can access the Internet, if others cannot access the Internet, restart the router.

2. If others can access the Internet, then open "Settings", turn on "Airplane Mode", wait for dozens of seconds and then turn it off.

3. If you still can't access the Internet, find the name of the router you are connected to under the Wi-Fi page and select "Ignore this network".

4. Reconnect to wifi and modify DNS to or.

5. Summary: The above is the solution to the iPhone that cannot access the Internet even with WiFi prompts no Internet.

Poor wifi signal on Apple phones.

1. Turn on and off the airplane mode.

Sometimes, the signal is unstable or very poor, and only a simple solution is needed. Turn on the airplane mode, wait for more than ten seconds and then turn off the airplane mode, and many times the problem is solved. This is the equivalent of a quick act of turning the network off and on again, and the effect is obvious.

2. Manually select the carrier.

Normally, your iPhone will automatically select the corresponding carrier network. However, there are times when the signal in the area is not good and there will be no service, at this time, you can try to manually choose the operator.

3. Reset network settings.

If the phone signal is still poor after using the above two methods, you can also try to reset the network settings function.

iPhone signal value display.

The corresponding meaning of the signal value:

Between 40 and 50 is near the base station;

The signal between 50 and 60 is very good;

The signal between 60 and 70 is considered good;

Between 70 and 80, the signal is slightly weaker;

Between 80 and 90 is a weak signal;

Below 90 is the basic communication state.

100, it is recommended to sleep at night or turn on the airplane mode, otherwise it will consume power and radiate a lot!

Restore the network settings to prevent the problem by doing the following:

1. Take Apple 11 as an example. First, open the settings indicated by the arrow on the desktop of the hand-held machine.

2. After opening the settings, click on the general pointed by the arrow.

3. Next, click on the restore of Chang Minfang under the page.

4. On the page that appears, click Reset Network Settings.

5. After that, you can connect to the wireless network normally. This is shown in the figure below.

Check out your router.

The reasons why the phone can't connect to wifi are as follows:

1. For example, if you have changed the password of the wifi, the mobile phone needs to re-enter the correct password, at this time you need to open the mobile phone settings - wireless network settings - cancel the saved wifi, and then re-enter the wifi password to try. In addition, the wifi runs for too long, resulting in some functions being affected, at this time, the wifi needs to be restarted, unplug the charger, and wait for 2-3 minutes to plug it back in.

2. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself; Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial-up to connect to the Internet.

3. If you can't access the network by dialing the number to go online, it means that there is a problem with the network, and see if the network is due and you need to pay the fee. Then check whether the network cable has been bitten by mice. If everything is normal, then there is only a customer service ** for broadband, 10000 for telecom broadband, and 10086 for mobile, he will help you fix it first, or if it doesn't work, let him send a technician over, it is free to come to the door.

The above problems can be solved by restoring the network settings of the Apple phone. Here's how:

Tool Raw material: Apple 6S mobile phone.

2. In the general interface, find the [Restore] option, and then click on it.

3. On the restore interface, find [Reset Network Settings], and then click on it.

4. After entering the next interface, enter the password of the lock trouser screen.

5. Finally, click [Reset Network Settings] in the pop-up window again.

The wifi password entered by the Apple mobile phone is correct, but it can't connect to the wifi, the possible reasons are system failure, router problems, and hardware problems.

1. System failure

When the iPhone enters the correct WiFi password, but has not been able to connect to the WiFi, this situation mostly occurs due to system network connection errors.

When encountering an error in the network of the Apple mobile phone system, we can generally turn off and restart the phone, and after restarting the phone, it may be able to connect to the wifi signal normally. If the mobile phone still cannot connect to wifi after the operation of the appeal method, please open the apple mobile phone [settings] - [general] - [restore] - [reset network settings] in turn, usually after restoring the network settings, you can generally connect to wifi normally.

2. Router problems

Apple mobile phone can not connect to wifi This situation mostly occurs in router failure, due to problems with router settings, the mobile phone may always be in a normal signal connection when connecting to wifi, but it is unable to access the Internet, it is recommended that you restart the router when you encounter this problem, or reset the router settings, and check whether the router is broken.

3. Hardware problems

If you still can't connect to wifi after the above reasons are ruled out, it is likely that the signal hardware of the mobile phone is broken, or there is a problem with other internal hardware, at this time, it is recommended that you go to Apple after-sales service to deal with it.

Tips for using iPhones

1. Tap the back: "Assistive Touch" often mistakes when playing games, so we can also set two shortcut functions by tapping the back of the phone, which are two taps and three taps, and the specific functions can be set according to your own usage habits. Open Path:

Settings - Accessibility - Touch - Tap the back.

2. **Text recognition function: In the web page, or open the album**, long press to select the text on the **, and you can copy it. Handwritten text in this function can be recognized, but the words are too sloppy, and the recognition rate is not high.

3. Scanning function: What to do when you encounter a piece to describe in the office, and there is no scanner, don't worry, directly find the "memo" in Apple's hand, and there will be one or two menus after the ascension of Changqin, select "Scan Document", and you can automatically align the photos taken over.