Why does Chigo air conditioning refrigerate 17 degrees outside the unit does not turn 25 degrees bef

The air conditioner does not rotate at 17 degrees, and the 25 degrees does not rotate, and the outside unit rotates at 17 degrees, but the speed of its rotation is relatively slow, but you pay attention to it, because it does not rotate when he first starts refrigeration, and he will turn after a while, in fact, whether it is 17 degrees or 25 degrees, it is rotary.

17 does not turn, 25 degrees outside the machine only turns, it may be your setting, you look at your setting, is it set to 257 degrees?

See if the air conditioner has poor heat dissipation. Check whether the cooling fan is rotating, whether the condenser pipe is dirty, and clean the condenser.

The highest air conditioning refrigeration, 17 degrees outside the machine does not turn 25 degrees, the outside machine only turns, it may be because your temperature is too low, so he can't turn.

Since the temperature you set was already too low and reached the limit of the air conditioner, she was already shut down. If the temperature is 25 degrees, start using the air conditioner.

: The external fan is not working, where is the cool breeze, the external fan will always work when refrigerating, the sound of the Chigo compressor is not very small, if you think that the fan does not turn, then you should be able to hear the compressor.

Because the minimum temperature set by the air conditioner is 17 degrees, it is said that you set the time of 17 degrees. He's not going to work.

Because in our hang-up, the higher the temperature, the faster it will spin at this speed, and the lower the temperature, the slower the speed.

Hello, this air conditioner, you can adjust the cooling to 25 degrees, in this way, he is more energy-efficient, and the air conditioner is better.

The air conditioner does not rotate at 17°, and the 25° unit does not rotate. You have to see if the design is like this, and it won't turn around if it's designed.

It should be that if there is a failure, it is recommended that you call the after-sales service ** for consultation, and then let a professional maintenance personnel come to the door and write down the maintenance.

1.The preset temperature is too high: Some air conditioner models may have a minimum starting temperature limit, if the set temperature is higher than this limit, the external unit will not start. You can try turning the set temperature down a bit to see if the external unit starts working.

2.Sleep mode: Some air conditioners may enter energy-saving mode or sleep mode, so that the external unit may not start until the set temperature is reached. You can check your air conditioner's settings to see if sleep mode is turned on and adjust the settings accordingly.

3.The indoor temperature has reached the set temperature and air width: If the indoor temperature has reached or approached the set temperature of 26 degrees, the air conditioning system may automatically stop the douhuai cold, and the external unit will not start.

You can check the indoor temperature, if it is very close to the set temperature, the air conditioning system may not need to work.

4.Failure or setting problem: There may be a fault or setting problem with the air conditioning system, which causes the external unit to fail to start.

This may require inspection and repair by a professional aircon maintenance personnel. It is advisable to contact the aircon manufacturer or local aircon repair service provider for further support and assistance.

Please note that the above are possible causes in general, and the specific situation may vary depending on factors such as air conditioner model, settings, and malfunction. If you encounter problems, please refer to your conditioner's user manual, contact the manufacturer's support department, or a professional aircon repairer for more accurate troubleshooting and solutions.

On hot days, the air conditioner hits to 21 degrees, and the outside unit does not rotate, and when it hits 25 degrees, the outside unit turns.

In hot days, the air conditioner hits 21 degrees, the outside unit does not turn, and when it reaches 25 degrees, the outside machine turns, follow the steps below to solve: 1. If the air conditioner is a fixed-speed air conditioner, the fan of the air conditioner does not rotate, which is a very normal phenomenon, the air conditioner is working, when the indoor temperature reaches the standard temperature you set, it will automatically stop working, and after the indoor temperature rises, the air conditioner fan will continue to operate normally. 2. The fan of the outdoor unit of the air conditioner does not rotate and the shooting section is still bad, which may be the cause of other failures as follows.

1. The fan motor of the air conditioner is damaged, and the solution: to determine that the fan of the air conditioner is not rotating due to the damage of the motor, you only need to replace the fan motor. 2. The capacitor of the starting fan is damaged, solution:

Replace the capacitor. 3. The bearing of the fan is damaged by the foreign body card or the bearing, solution: if it is caused by foreign matter, only clean the bearing, and replace the bearing with a new one.

4. The compressor is damaged, Solution: The fan of the air conditioner caused by the compressor does not rotate, and the compressor can only be replaced.

There are many reasons why the indoor unit does not work.

Structurally, it may be that the screw and the locking part of the rotor are loose; The flat position of the motor and the mating part of the wind wheel are not in the proper position; Due to the problems of injection molding process assurance, the plastic parts have a squeaky sound, the air guide strip and the connecting rod mechanism belong to plastic parts, and the transmission performance of the structure of the air guide strip, stepper motor and connecting rod mechanism is affected, which will also cause the indoor unit to not run. In terms of electronic control, due to the dust and water vapor in the indoor air deposited on the inside of the indoor unit, the corrosion of the electric control box or sheet metal parts crushes the wire skin, resulting in leakage or short circuit. The outdoor unit of the air conditioner does not operate, in addition to the structure and electronic control, there are also performance reasons.

In terms of structure, it mainly depends on whether the motor and the fan blade are in place and whether they are loose. In the outdoor unit of the air conditioner that is temporarily used, once a problem occurs, it is necessary to check the air conditioner maintenance compressor overcurrent protector to further check whether the compressor is working normally.