More than 4 GB of files are copied to a disk with 13 GB of free space, but there is always not enoug

Hehe, your partition is not NTFS, fat32 does not support files above 4G.

Convert the volume to NTFS from the command prompt

In the Command Prompt window, type:

convert drive letter: fs:ntfs for example:

To convert the D drive, you can enter Convert D: fs:ntfsNote To open the Command Prompt window, click Start, point to Programs, point to Attachments, and then click Command Prompt.

With this command, you can convert a FAT or FAT32 volume to NTFS.

With this conversion method, the original files on the disk will not change, but the process is irreversible, that is, the files cannot be converted from FAT32 to NTFS format without any changes.

During the operation, you may encounter several questions that ask you y or n, select y for all, and you may need to restart the computer to complete the conversion process, all of which are prompted.

Defragment the 13GB of space first, and then pull the files in.

Check which disk format is available before transferring files. FA32 does not support files above 4G. You need to convert it to NTFS format. If you use the built-in command conversion of Windows, you will not have any operation on the files on the disk, and the specific operations are as follows.

Start-run-cmd-

convert x: /fs:ntfs

where x represents the drive letter of the disk you want to convert.

The mobile hard disk cannot copy files larger than 4G because the format of the hard disk is FAT32 format, and a single file supported by the FAT32 format can only support a maximum of 4GB.

1. Plug the portable hard disk into the computer, and then open "This Computer".

2. Find the USB flash drive in the computer, right-click the name of the USB flash drive, and then select Format.

3. Select the "NTFS" format in the file system.

4. Finally, click Start to format the mobile hard drive.

If you want to change the D drive to NTFS format, I've encountered it!

Here's how to modify it.

For FAT32 partitions, a single file cannot exceed 4G, and it can be converted to NTFS partitions.

FAT32 Disk format, a single file size, can not exceed 4G, you have to convert the format, convert the disk format to NTFS format!

Method: As follows.

If you want to convert the file system of a partition from fat32 to NTFS in WinXP, while keeping the data in the partition unchanged, then it is a good choice to use WinXP's built-in commands.

Click "Start" and "Run" in turn, enter "cmd" and press enter to open the "Command Prompt" window. In the command prompt state, type "convert f: fs:ntfs v" and press enter.

Here "f:" is to convert the partition of the file system, and the parameter "v" indicates that the details are displayed during the conversion, and this parameter can be omitted. When restarting the computer, WinXP will automatically add F:

disk to NTFS file system (the process will be displayed before entering the system) and then entering the system.

When you want to copy a large file of more than 4G to a USB flash drive, it suddenly prompts that the file is too large to be saved. Then let's open the USB flash drive and convert the format to save large files.

What should I do if the USB flash drive cannot copy large files larger than 4GB? This is an easy way to solve the problem.

Reformat the portable hard drive and format it to NTFS

The system is FAT32, and the file size is too large, so you can change the hard disk to NTFS

The reason for the prompt that there is not enough free disk space is:

1. It may be that there is really not enough exciting space on the computer to hold the copied files. If the remaining space of a disk on the computer is less than the file being copied, it will prompt that it cannot be copied, please insert a new hard disk.

2. It may also be that the hard disk format is FAT, this kind of hard disk does not support access to files above 4G, when the remaining space of the hard disk is less than 4G, if you store more than 4G files in it, you will be prompted that the disk space is insufficient.

FAT is a file configuration table that is a type of file that is developed by Microsoft.

Invented and partially patented file system.

It is a file widefield system for MS-DOS and for all non-NT core Microsoft windows. The FAT file system was not complicated by the limited performance of computers at the time, so it was supported by almost all operating systems of personal computers. This feature makes it ideal for floppy disks and memory cards.

File system, which is also suitable for data exchange in different operating systems. Now, FAT is generally referred to as FAT32.

It's a complicated question! When it comes to your hard disk partition format, the current hard disk partition format of yours should be in FAT32 format, but the FAT32 format does not support 4G large files, you can only copy the file to the NTFS partition. If you don't have an NTFS formatted partition, you can only convert it, but that would be too cumbersome, and you have to repartition it.

See if the sector is broken! Scan it at the root of the disk, and if there is one, it will be repaired automatically and it will be used.

This is caused by the partition's file system for FAT32. This file system cannot store a single file larger than 4GB. Reformatting to NTFS or ExFAT is sufficient.

Common file systems with the following characteristics:

FAT32: This one is generally for small hard drives, such as 40G. The advantage is that the compatibility is the best, and it can be read by Apple and mobile phones, and the disadvantage is that a single file cannot be larger than 4GB.

NTFS: This is currently the most widely used format on PCs, and there is no problem with a single file exceeding 4G. The disadvantage is that it reads and writes frequently, so it is not suitable for use in flash drives such as USB flash drives. This is recommended for portable hard drives.

exfat: This one is specially launched by Microsoft to solve the shortcomings of FAT32, and it is dedicated to flash drives. It does not have the disadvantage of the short lifespan of NTFS, and it can also enlarge the file. Flash drives are preferred.

Black disk, expansion disk, not **, is to brush the small capacity of the USB disk into a large capacity to sell, very cheap, if you just bought not long ago try to take it to return.

The fake 32G is artificially enlarged data, not the real 32G, and it is estimated that your USB flash drive is about to enter the trash. Or buy**.

Hello bosom friend!

Just format your USB flash drive to NTFS format, otherwise, it is not supported to deposit a single large file greater than or equal to 4G, if it helps you. Please click the "Select Satisfactory Answer" button below my answer. Timely adoption will bring you to 5 Fortune Points.

It's very simple 32g USB drive in fact, the real capacity wood has 32g only.

About 29g.

You can see what the real capacity is in the property.

If there is a virus, you'd better format it, and some diseases can't be killed.