How to draw a wall with multiple lines in CAD, what is the shortcut key for drawing wall lines in CA

Look at the size of your drawing, it seems to be an A3 drawing, 1:100 drawing. If the frame is really A3 size, you can draw it at a 1:100 drawing scale.

But I still recommend that you start without setting the drawing boundary, just press the 1:1 drawing, and finally use the layout set frame to draw the drawing, which is more convenient and less prone to errors.

The first thing to do is to set the multi-line style and see how far apart your multi-lines are to determine the proportion.

CAD drawings are drawn 1:1 and then drawn with wireframes.

1. Drawing of multiple lines.

1. Drawing - multi-line (ML).

Note: (1) The so-called multi-line means that multiple lines can be drawn at one time, and it is generally used to draw wall lines in architectural drawings.

2) Alignment includes: upper alignment, no alignment, and lower alignment.

3) Scale: Used to set the distance between multiple lines.

2. Format - multi-line style.

Note: (1) Create a new multi-line style.

2) Multi-line characteristics: set whether the starting position of multi-line is sealed.

2. General steps for drawing architectural drawings.

1. Create a new drawing and use the limits command to adjust the drawing range.

2. Use the zoom (z) command and call all (a) zoom to display all the drawing areas.

3. Create a new layer used in the drawing, and name it, adjust the color and line type and other attributes as needed.

4. Set the multi-line style.

5. Draw the center line of the building drawing first, and then use multiple lines to draw the wall line structure.

6. If the scale of the drawn linetype does not match, you can adjust it in the property panel (Ctrl+1).

7. Modify - Object - Multi-line (or double-click directly on multi-line) Note: The interface used to modify the wall line.

8. Stretching (S).

Note: (1) When using the Stretch command, the selection of stretched objects can only be used by contact selection.

2) When you stretch an object, only the points of the selected object are stretched.

3. Drawing of the drawing frame in the drawing.

Scale (sc): Scales the graph in equal proportions.

1) Scale factor: refers to the scale ratio.

2) If you want to scale unevenly, use the stretch command.

CAD drawing wall lines requires the use of the command line.

The specific steps are as follows:

The first step is to open the CAD program in your computer and enter the main page of the CAD program.

Step 2: After opening the CAD, enter the command ML of the wall line and press the spacebar to confirm.

The third step, after determining the balance of the wall line commanding code, enter the proportion shortcut key.

s" and press Enter.

Are you sure. <>

Step 4: Enter the scale shortcut and enter the scale.

Step 5: After entering the scale, you can draw the late skin wall line.

The steps for CAD to draw a double-line wall are as follows.

1. Type "mlstyle" in the command line and press enter.

2. In the "Multiline Style" window, select "New".

3. In the "New Style Name" window, fill in "240" (that is, fill in the red box as shown below), here the double-line wall as an example, and then click the "Continue" button.

4. In the window bar of "Fix the Radical Mess and Change the Multi-line Style-240", select the options in the figure in turn, change the offset value to "120" and "120" in turn, and then click the "Confirm Judgment" button.

5. The full name of the two-line command is ml, and you can enter it in the command line.

6. Determine the position of the second point of the double line by entering the length.

7. Determine the position of the third point by injecting the width of the potato.

8. Enter the length and width again to determine the figure.

In this way, the double-line wall is drawn in CAD.

Tools: Computer, CAD.

The first step is to turn on the computer, enter the desktop, open the CAD, and open the drawing.

Step 2: Enter the command ML in the command bar and press the spacebar to confirm.

Step 3: After entering the ML wallline command, enter S and press the spacebar to confirm.

The fourth drawback, after confirming the s command, enter the distance to the mountain 240, press the spacebar to confirm.

The fifth step is to display the distance between the walls after the space bar, which can be completed.

The steps on how to draw multiple lines in CAD settings are as follows:

1. Open CAD to select the classic mode, find the upper menu grid, and select the format.

2. In the Gesen Confession, we find the multi-line style and then do the spring Wu strike purely or point, and then we will get the following window to set the multi-line, so that we can complete the setting according to our requirements.

3. Click New, here you can create the multiline we need.

4. In the following window, we can select the offset distance of the multi-line, and whether to set the line segment in it, select the line type, the color of the line, and the fill color of the line.

5. After modifying, click Confirm to return to the following window, we select the multi-line we just made and then select Set as Current, so that we can draw multiple lines.

Operating Equipment: Dell Computer.

Operating system: win10

Operating software: CAD 2014

1. After opening the CAD software, enter the shortcut key ML, and then hit enter, as shown in the figure below

2. There are three options in the command bar, select the middle ratio, and set the ratio value to 240, as shown in the following figure:

3. Then specify the starting point position of the double line, as shown in the following figure:

4. Then enter the distance value, here the input is 2000, as shown in the figure below:

5. Such a double line will get the effect after doing it for a week, but there is a part of the crossing, as shown in the figure below

<>7. Click the two lines of the focus in turn, as shown in the following figure:

CAD walls are usually drawn with multi-line commands.

1. Set the next multi-line in the format-multi-line style and create a new style.

2. Set the multi-line offset and so on, where the upper and lower offset is 120

3. Then, ml command, pay attention to the command line below, select the alignment, proportion, style.

4. Start painting the wall, and after the rough drawing, it's time to make modifications. You will find that there are some places where the walls meet that need to be opened.

Click Modify - Object - Multiline, use the Multiline tool to make appropriate changes to your wall.

Enter mlstyle in the command line, and the Multiline Style dialog box will pop up, as shown in the figure, and click the New button to pop up the "Transcend New Multiline Style" dialog box. The new style name is 240 (here two or four walls are used as an example).

CAD wall line drawing method (double line command).

In the pop-up style window, enter the content as shown in the following figure, when modifying the number of the element area, click which row to modify, and modify the number to 120 and -120 at the offset. The color is customized.

CAD wall line drawing method (double line command).

In the same way, set the styles named "250-120" and "120-250" respectively, and the parameters are set as shown in the following figure.

CAD wall line drawing method (double line command).

CAD wall line drawing method (double line command).

When you have finished creating the style, go back to the Multiline Style window and set the 240 style to current. Here I draw a random axis and draw 24 walls on top of that.

Enter ml enter (ml is a two-line command).

Don't rush to draw just yet, at this time we observed that the command prompt line shows three items: alignment, proportion, and style.

Enter j enter, and then enter z enter, (because it is +120, -120 when setting multilines, so set 0 as the baseline here, and offset 120 on each side, select "no way").

Then set the scale, enter s enter, enter 1 enter (the scale is set to 1).

After setting, see if the style is displayed as 240, if yes, don't move, if not, continue to enter ST enter, enter 240.

CAD wall line drawing method (double line command).

From this we can draw a two-four wall along the axis. The same goes for the three-seven wall.

1. Open the AutoCAD2007 version on the computer.

2. After opening the CAD, enter the wall line command ml, and then press the spacebar to confirm.

3. After determining the wall line to take the staring command, enter the proportional shortcut key "S", and then press the spacebar to confirm.

4. After entering the proportion shortcut, enter the proportion, and then press the spacebar to determine the proportion.

5. After entering the scale, you can draw the wall line.

The steps for drawing a CAD double-line wall are as follows:

1. Open the CAD drawing software and draw the drawing in the drawing area of the model space.

2. The full name of the two-line command is ml.

3. Determine the position of the second point of the double line by entering the length.

4. Determine the position of the third point by entering the width.

5. By double-clicking the corner point, set the box and select the corner point combination.

6. Finally, it can be seen that the double-line wall using CAD flowers has been completed, and the problem has been solved.

Operating Equipment: Dell Inspiron 7400

Operating system: win10

Operating software: CAD software 2007 version.

1. Open the 2007 version of CAD software on the computer.

2. After opening CAD, enter the wall line command ml in the command bar, and press the spacebar to confirm the command.

3. After entering the wall line command, enter the proportional command s, and press the spacebar to confirm the command.

4. After entering the wall line command, enter the proportion of the wall line, and press the spacebar to determine the proportion.

5. After determining the proportion of the wall line, you can draw the wall effect.

AutoCAD (Autodesk Computer Aided Design) is an automatic computer-aided design software first developed by Autodesk in 1982, which is used for 2D drawing, detailed drawing, design documentation and basic 3D design, and has now become a widely popular drawing tool in the world. AutoCAD has a good user interface and can be operated through the spine through the interactive menu or command line. Its multi-document design environment makes it easy for non-computer professionals to learn to use it quickly.

In the process of high-end practice, we can better master its various application and development skills, so as to continuously improve work efficiency. AutoCAD is widely adaptable, and it can run on microcomputers and workstations supported by a variety of operating systems.