What is the harm of cotton spraying in the sofa factory, and how to deal with the spraying of glue o

Long-term exposure to cotton spraying glue on sofa factories may cause allergic rhinitis.

Blood diseases, liver function.

damages, etc. Cotton spraying harmful ingredients come from the chemical material that dilutes the glue.

Spray cotton is suitable for places with high air cleanliness requirements such as paint baking room, and the spray cotton is an organic synthetic fiber filter medium with high performance and anti-fracture and an increasing structure (that is, the fiber density of organic synthetic fibers in the direction of pure air gradually increases).

Spray cotton does not contain silicon, with low resistance, large air volume, high dust holding capacity and good effect; High temperature resistance of spray cotton (100); Spray cotton is hardened, washable, and has a long service life; Spray cotton is suitable for general air control departments, air conditioning systems, various ventilation systems, air inlet pre-filtration series, blast furnace air heaters, railway, automobile ventilation series, furniture factory paint booth, heavy industry.

and the chemical sector, among others.

If you make a sofa, you must spray glue on the cotton, which factory also does this, just to see if the glue used is environmentally friendly. Generally speaking, as long as you buy a more expensive and better sofa, you should be fine.

When glue spraying is found on a sofa surface, there are a few things that need to be taken immediately to deal with the situation. Spraying is an adhesive that sticks to the sand and keeps the sand sticking together. If left uncleaned, these glues can have an impact on waves and marine ecology.

Here are some ways to handle dispensing.

1.Manual cleaning: If there is only a small piece of sofa with adhesive spraying, manual cleaning can be used to remove it.

Use some napkins or towels to wipe the spray glue off the sand thoroughly. This requires patience and care, and you need to make sure that there is no other sand around the circumference, otherwise the spray glue will be directly applied to other places.

2.With the help of nature: If the spray glue on the sofa is difficult to clean manually, then it can be removed with the help of nature.

At high tide, the waves wash away some of the spray glue. After several high tides and low tides, the spraying glue can be completely removed.

3.Use a detergent: If the glue on the sofa is difficult to remove, then some detergents can be used to assist in removal.

Use some detergent and soak it in the spray glue before scraping or wiping it with a tool. At the same time, the use of detergents needs to pay attention to the impact on the surrounding ecological environment.

4.Invite a professional cleaning company: If it is difficult to deal with the spraying of glue, then you can consider asking a professional cleaning company to assist in the removal. These companies have the equipment and skills to clean up the spray as quickly as possible while reducing the impact on the surrounding environment.

In short, dealing with the spraying of glue on sofa surfaces requires patience and environmental awareness, and needs to be removed in a suitable way, while also avoiding the impact of the age on the surrounding environment.

Is the sprayed cotton sofa cushion good? Hello, I'm glad to answer your question <> pro-spray cotton sofa cushion 1Pearl cotton:

The pearl cotton is treated with high-pressure technology, which is the smallest molecule and the most resilient performance in all sponges. The pearl cotton is compressed, and the texture is tightly packed into beads. With the process of use, the internal stress of the pearl particles will be gradually released, and it has the characteristics of becoming more fluffy the more it is used.

Therefore, the waist bag processed with pearl cotton is particularly plump and elastic, and the cost of pearl cotton is relatively expensive, so it is generally only used for small pillows and lumbar pillows with strong contact frequency and destructive power with customers. 2.Shaped cotton:

The best way to get a sofa cushion liner is a sponge with a different shape, and good manufacturers use plastic sponge to foam at one time. However, in order to save costs, many manufacturers use sponge scraps to bond into a whole piece and then cut it, which greatly reduces the service life and elasticity of the sponge. Thus affecting the service life of the sofa.

3.Spray cotton: The spray cotton in the sofa cushion has good plasticity.

The longer the old finch fiber of the spray cotton, the better the quality. All large pillows and cushions are covered with a layer of spray cotton on a 35-density sponge. The use of spray cotton can reduce the friction between the fabric and the sponge, increase the smoothness of the sitting feel, and at the same time make the lines of the sofa look soft and vivid.

4.Doll cotton: Because the pillow sponge needs to be soft and comfortable in texture and has a good supporting effect on the spine, it is recommended to choose 3A filament holding and grinding doll cotton with a density of 30.

The texture of this sponge is close to the natural cotton that has just bounced out, but the poplar and unisex are more durable, and the cotton is pure, environmentally friendly and odorless. 5.Sponge:

The process of the sponge determines the density of the sponge. At present, the density of domestic sponges can reach but not exceed 35%. Among them, more than 35% of the pure content is gum products.

Due to the high cost of resin products, some unscrupulous merchants artificially add talcum powder during the production process to increase the density of the sponge. However, in the processing of fossil powder, a large number of components contain methylwake, toluene, etc. And it is fatal to the human body.

Moreover, with the addition of fossil powder, it is easy to fall off, and the service life and performance of the sponge are seriously damaged. 6.Down filling:

It has great fluffiness. When used as a sofa filler, it is more comfortable to sit on than ordinary sofas, and it is not easy to deform after long-term use, and has a longer service life. But this kind of down sofa has a slow rebound and high production cost, so down sofas are usually used with sponge to make "sofas or cushions."

Hope mine can help you <>

Do you have any other questions?

Summary. Precautions for the use of viscose removers:

1. Do not spray adhesive remover on the original label (such as the manufacturer, model, grade, etc. labeled on the body of the new car) and the license plate, so as not to cause abnormal conditions such as discoloration or spotting on the painted surface.

2. Keep away from children.

3. Do not enter and do not spray it on objects that are in direct contact with food.

4. If it accidentally gets into the eyes, it should be rinsed with water immediately.

5. Please store it in a place lower than 40 degrees, away from heat sources and open flames, and it is strictly forbidden to expose to the sun, puncture or incinerate the tank.

Viscose remover can be sprayed on leather sofas.

Precautions for the use of viscose remover: 1. Do not spray viscose remover on the original label (such as the manufacturer, model, grade, etc. labeled on the body of the new car) and the license plate, so as not to cause abnormal conditions such as discoloration or spotting on the painted surface. 2. Keep away from children.

3. Do not enter and do not spray it on objects that are in direct contact with food. 4. If you accidentally enter the collapsed hands, you should immediately rinse them with clear water. 5. Please store it in a place lower than 40 degrees, away from heat sources and open flames, and it is strictly forbidden to expose to the sun, puncture or incinerate the tank.

What you're asking.

How to remove the paint on the leather sofa.

Good. Wind and oil essence to paint the leather accidentally stained with paint, most people think of washing it with gasoline, in fact, using wind oil essence can also solve problems for you. Method:

Apply a small amount of wind oil essence to the stain and wipe it with a dry cloth before it has completely evaporated. Repeat it several times, the paint will fall off, and then Chanchang can wipe it with a clean damp cloth. The detergency of wind oil essence is comparable to that of gasoline, and the aroma is not as bad as the smell of gasoline.

Do you have any other questions? The order ends automatically after 24 hours, and if I'm helpful to you, I look forward to your like.

There is no harm to the skin.

If you don't, it's easy.

1. Q: Why is the spraying effect not good during the use of glue?

Answer: This is related to the quality of the spray gun, uneven air pressure, unequal spraying distance, temperature changes, improper selection of product models by users, etc.

2. Q: Why does the smell of spraying glue feel bigger in autumn and winter?

A: This is related to the poor temperature and air circulation in autumn and winter, as well as the rapid bonding, resulting in the spraying odor can not be completely released.

3. Q: Why is the adhesive not as strong in winter as it is in summer?

Answer: Temperature, humidity and the specification of the residual delay of the spraying operation are the three major factors that affect the adhesive adhesion of the spraying glue.

4. Q: Why is the quality of the furniture very good at that time, but there will be "blistering" and other local non-stickiness after the cabinet is gone?

Answer: This situation generally appears on synthetic leather, the reason is that a certain amount of plasticizer will be added to the synthetic leather material during synthesis, and the plasticizer will migrate under certain conditions (temperature, long time), and a certain chemical reaction will occur in the process of migration, resulting in a similar situation of not drying and "blistering" on the joint.