Why can t 5230 install software? 50

What software to install? Is it a signature or whatever.

1. Connect the mobile phone to the computer with a data cable and install the SISX JAR program with the PC kit

Note: The jar file can be installed directly without unzipping, and the file name of the jar must be in English, otherwise an error will occur).

Install the PC kit on the computer, connect the phone and the computer with a data cable, and enter the Nokia mobile browser in my computer.

After entering, we can see the C disk, the E disk, and the four columns of contacts and information of the mobile phone.

Now let's start installing the software, find the Sisx JAR software that needs to be installed on the computer [anywhere].

1.After double-clicking on this file, a prompt will appear, 'Do you want to install the app on your phone?'

2.After selecting Yes, 'Please complete this installation process on the phone user interface' appears

3.At this time we look at the prompts on our mobile to carry out the installation work.

5.Select Yes to continue the installation, otherwise to exit this installation, we select Yes.

6.This is a prompt on the phone interface to see if to install the software.

7.Again, we also choose to be:

9.We choose to install, the latter two items are irrelevant and can be ignored.

10.After selecting the installation, the phone will prompt you to select the software installation location, 11Once you have selected the installation location, the software will be automatically installed on your phone.

12.After the installation is completed, we can go to the menu and find our newly installed program.

2. Install the SIS JAR program directly on the mobile phone:

Put the Sisx JAR program you need to install on the memory card first, go to the file management program that comes with the phone and find the program we need to install

Select Open after this software.

According to the method, the operation of the lower half of the operation can be done.

Is it a memory problem? Does the landlord have a memory card?

V21 and above need to be cracked,The following can be cracked by software,Details yourself on the Saipan J5230 forum。

Nothing can be installed! Is it that there is no certificate or that the software is corrupted.

What can't you install?

I can't find it, then you see if there's a mistake in it, and if you put it, it must be in it.。。。 Some software wants a mobile phone visa,

Softbar: Enter* or * Require password on standby.

Hard: This method is generally used when the system is so chaotic that it can't be turned on

After powering off, press and hold the call button, the number 3 button, and the * button at the same time, and then press power on. Don't let go, at this point the phone has already started to format (some older models will have an English waiting note when the grid is displayed). Press one piece, don't let go of one, and wait for the phone to automatically turn on and ask for the input time to complete the grid.

This formatting is more thorough and does not cause invalid formatting.

Other: Turn off and press the * + power on button, and start the grid without any prompt.

Precautions: Sufficient power must be guaranteed when formatting, and generally it should be operated under full power. It's a good idea to uninstall all the software and see if you get any similar "system errors".

If there are no similar "system errors", then proceed to the grid. Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.

The software part that was originally installed on the expansion card will be affected, so under normal circumstances, the important data of the expansion card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the format of the mobile phone is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management Remove the extension card Check if there is a system error Format the phone Install the expansion card Format the expansion card (the phone at this time is the purest basic system) Install the programs that need to be installed Restore contacts Complete.

c. Preparation before the grid machine and resume work after passing the machine.

1. Back up your contacts Open the Business Card Holder option Mark All and Copy to the memory card.

2. Format the mobile phone See a and b above for the operation method.

3. Restore Contacts Open the Business Card Holder option Copy from the memory card.

4. Use a card reader to back up the files that need to be backed up in the extension on your computer.

5. Format the expansion card with your phone.

6. Restore the English-Chinese dictionary thesaurus.

9. Adjust your phone settings.

10. Set the Data Management --- Memory Card option to back up phone storage, and keep a relatively clean backup of phone settings on the expansion card.

11. Install the required software.

The light grid machine has a fart use, and the upstairs is really a master, prompting "the component has been solidified in the system" means that the DIY firmware you brush has been solidified or contains the software or components you want to install now. It may also be caused by the absence of grid before flashing or the lack of hard space after flashing, resulting in the remnant of the previous system file.

Format the memory card before flashing, if you really don't want to format it, please use the mass storage mode to connect to the computer, and delete the 5 folders of sys, system, data, resource, and private in the card. After flashing, insert the memory card into the phone and hard-track the phone once. (Here is an explanation of why this is done, the card is taken out to flash the card to prevent accidental locking of the card when flashing, and the card is inserted after flashing because the hard grid will create some necessary files to the memory card.)

You can do it yourself if you want to brush what type of firmware.,There's a pure version.,Beautified version, etc.,I won't do it I'll teach you.。

Because the firmware version you are flashing has included and solidified the software you installed with your spirit, the installation is not solidified, it is OK, or when flashing, the third light will go out.

Are you using an original 2G card? If so, it could be that your remaining capacity is between 900m ---1g. You put something in the memory card, avoid this area and install it normally.

Boss, you can give me the symptoms too. Who knows what will be like after you press it, give a specific situation.