5233 can t turn on, it should be not enough memory on the C drive, what should I do with the grid ma

Soft bar, standby input*, and then enter the password on it. Hard grid: 1

Shutdown 2Press "Green + Red + Camera" at the same time and then press "Power On". Note:

The power button can't be pressed all the time, after the phone shakes, let go of the power button, and then the handshake screen appears, let go of all the buttons. It's over

There are many reasons why it can't be turned on, it may be that the battery is not in good contact, a lot, you try, if it doesn't work, just flash it, and if you don't have a vibration, you can flash it.

You can try the grid, if it doesn't work, it is recommended to flash the machine. You can go to the Saipan forum to flash the next i software, it's very simple.

Hard bar, press and hold * and 3 and the dial key, power on, don't let go until the boot is complete.

When the phone is turned off, connect it to the computer with a cable to delete the things in the phone!

1.Try a different SIM card.

2.Remove the multi-** card and try.

3.If none of the above work, please take a grid.

4.If it doesn't work, you can only go to the flashing machine and spend a dozen dollars. I used to have a mobile phone with a small memory, on the Internet, the problem of the mobile phone system itself, and finally only flashed.

Remove the memory card, find a card reader and plug it into the computer, kill the poison, and delete some useless things.

Do you have too many things in your phone? Don't overfill it, as the system will need to write some information to the memory while it is running.

It's not a big problem, just delete something.

Nokia Symbian system is like that, although a lot of your software is installed on the memory card, but a lot of files will still be put on the C disk, so that the C disk is easy to fill and many applications on the mobile phone are on the C disk, such as the cache This has nothing to do with your additional storage.

You don't need to buy a memory card, you delete the useless large files of the C drive, if you don't know which ones should be deleted, you restore the settings, but be careful, the useful information is transferred out first.

I often use my mobile phone to watch**I can watch it for 2 days.,I'm charging it once a day now.。。 You're okay with that.

As soon as you boot on, even Montnets may be that some of your software starts automatically when you boot up and needs to be connected to the Internet, take a look for yourself.

The insufficient memory of the C drive has absolutely nothing to do with the phone being wet The lack of memory is a software problem, big brother I am also n86 Last time my phone fell into the porridge I used a hair dryer to dry it and it was fine This is the benefit of Nokia Hahaha Regarding your lack of memory There are two ways to do it First, you just need to uninstall some less commonly used software It's OK Second, it's more thorough It's a factory reset Nokia's default password is 12345 Good luck I used the second method before hahaha.

The mobile phone is flooded, and it can't be turned on, so find someone to clean it and dry it before turning it on.

Got into the water, right?

The water takes up too much space, hehe, joke.

Of course, reinstalling the system is the most effective solution. But if you're afraid of trouble ...

Problem Analysis:1. Originally, a program needs to be self-started when it is booted, but you did not uninstall it but deleted some of the files in it, resulting in the computer constantly looking for the program when it is turned on, but it just can't find it, and finally reports an error or no error.

2.Most likely, some viruses or malicious programs will automatically start many scripts or programs at boot to open a certain port or many other backdoors on the computer, because these scripts are executed at boot time, resulting in slow boot. I've seen a LAN virus when I do it, and when I turn it on, it will load hundreds or even thousands of scheduled tasks, and there is no other problem except for slowness.

Not only is the boot speed slow, but the normal operation speed is also slow.

3.Some system files are also necessary at boot time and as a result you unintentionally delete them resulting in boot time because the file is not found. Although the symptom is also slow booting, it may actually be that a service or function of the system is not started.

4.Some software needs to be connected to the Internet to fully boot, and as a result, you don't have a network when you boot up, and as a result, the software is constantly looking for a network, resulting in slow boot.

5.For example, the computer in the company that joins the domain environment, the boot password is actually saved to the domain controller, and as a result, you are not in the company's local area network, resulting in the fact that you have been looking for the domain controller when you boot up, but you can't find it, so the computer will go to the local to find it again, if the domain account has logged in to the computer, then it can be started normally, but the overall speed is very slow.

In view of the above several problem solutions.

1.Use the 360 or msconfig command to view boot items and close useless or suspicious startup items, clean up junk and disk defragmentation.

2.Check if there is any suspicious content in the scheduled task. Antivirus.

3.If the optimization or third-party repair tool does not solve the problem, it is recommended to reinstall it.

Look at the cause of the problem and you will know how to solve it!

If you have any questions, ask them again

It's hard to say this question, there are too many reasons, are you sure that the program was deleted?

First of all, it is possible that your hardware acceleration is turned off, and second, it is possible that it is poisoned, so install the system once to see.

If something goes wrong with the system, rebuilding the system is the best way to solve it.

Restore the system, or reinstall the system.

Is it usually fast to boot up? Can you describe the program you deleted?

1) Reinstall the operating system first, don't install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

2) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

It is recommended to disassemble the case to see if the capacitors on the motherboard are bulging or if the power supply is faulty.

No! Just go to a computer store and spend 50 yuan! Fix the next PC Manager There is an anti-blue screen setting in it!

Press the power on button and volume up button in the shutdown state, the coal digging mode appears, perform double WIPE, and then select the first line to restart.

You remove the battery, attach it, and press the power button and the volume button at the same time.

Memory upgrades are multiplied, see how much memory your computer has now, and then upgrade it exponentially against the model, for example: 256 is upgraded to 512, and 512 is upgraded to 1024.

1: Try to change the position of the two memory modules, and pay attention to make them contact well when installing.

2: The frequency, voltage, and size of the two memory modules are not the same, it is recommended to add one with the same frequency, voltage, and size.

3: The new memory module is not compatible with the computer, it is recommended to replace the memory module.

It is because the new memory module installed does not meet the requirements of the computer, so it cannot be started normally, so it cannot be turned on.

3.Once the memory module is installed, plug in the battery and tighten the screws. If it is not tightened, the screws will loosen in the future, the battery will loosen, and the power contact problem will cause the computer to not turn on normally.

Have you tried to see if you can turn on this one with only the new one?

It may be that the memory is in conflict with other hardware.

1: Pay attention to see if there are different memory brands and different memory chips, which will cause compatibility problems. It is best to change to two memory sticks of the same brand and the same capacity.

You can go to the computer market to change it, I believe it can be replaced, after all, the life of the memory is still quite long, pay attention to the memory when plugging in the memory, do not touch the chip with your hands, there is static electricity in your hands will break down the chip.

2: Another memory problem is sprinkled.

See if the gold finger is oxidized, wipe it with an eraser, and if the memory slot is dusty, clean it up.