Regarding the construction of houses in Australia, the separation between houses

There are similar regulations, because it is a two-story building, so the space requirements are high, because there is an impact on the daylighting of the neighbors. Therefore, when building a house, you must find a builder, who can help you design and build. They will design it according to your requirements and then hand it over to your district for approval.

Generally, it takes more than 1 month to approve. They will actually conduct an on-site survey, and if they think your house will affect the neighbors, they will send back the original blueprints and ask for improvements. So if you are not in a hurry, you can let the builder design according to your original idea, and if the approval is really not approved, then improve.

Your architect and Builder will take care of this, you don't have to worry about it...

International students cannot buy a house of more than 400,000 yuan.

I don't know. But a lot of the two-story houses around me are close together. But it's not one wall, it's two walls stuck together.

If you don't know, go to your local council and ask. And if you want to build a house, especially a two-story house, you need to be approved by the council. If you are surrounded by a one-story house ...

Generally, you will not be approved for an artificial two-layer.

International students can buy a house for more than 400,000 yuan, and my friend has already bought it. City bought two sets, each of which exceeded 400,000.

International students can also buy second-hand houses, I personally asked, confirmed that it is possible to buy, and you can take out a loan without a job, as long as you have the money to pay about half of the down payment.

However, international students buying a house is an overseas investment and needs to apply, but the agent and lawyer will help you get it, so it doesn't matter.

There is no problem with sound insulation, as long as it is a regular house, there will be stone aspos for sound insulation in the middle of the wall.

According to the national "General Principles of Civil Building Design" gives the sunshine standard:

The dwelling should have at least one room in each household, and at least half of the rooms on each floor of the dormitory should have access to the full window of sunshine on the winter solstice for not less than 1h (hours). On the winter solstice, the full window of sunshine is not less than 1 hour, which refers to the sunshine spacing, and the sunshine spacing refers to the distance from which the emissions are not blocked after ensuring direct sunlight. The sunshine spacing is determined by several factors such as the orientation of the house, the height of the rear row of houses, and the local latitude and longitude geographical environment.

To calculate the insolation spacing, there is a simple formula, which is do=l*ho9 (where ho=h-h1). In the formula, do represents the sunshine spacing, l represents the local horizontal shadow length rate at 12 noon (winter solstice), h is the actual height of the front row of houses, h1 is the actual height of the bottom window sill of the rear row of houses, and ho is the calculated height of the front row houses. l can be consulted by the local architectural design department, or calculated according to the local latitude and longitude, according to l = ctg (local longitude + local latitude).

If the calculated sunshine spacing do is greater than the actual distance between the two buildings, there is a problem.

For more details, it is recommended to consult the local construction management department.

Generally, the height and spacing of houses are around 1:1.

To put it simply, the spacing is generally a multiple of the height of the building. Of course, there will be differences from place to place, but I don't think it will be too big.........

This has something to do with the distance of the sun.

It depends on the relative location of the two buildings and which city you are in.

If the 3-storey building is directly south of the 6-storey building, then just calculate a spacing for it. Generally, a city in the south is a height of a 3-story building, but if it is a city in the north, it is generally the same. It varies from city to city.

In addition, there is a minimum fire spacing between 3 and 6 floors, which is 6 meters.

It should also be a high-rise or a bungalow!

The norms are different in various places, and the gap is very large... Your question is too general. The answers upstairs are similar, but the first rule generally only applies to strip buildings, and point buildings generally have to determine the spacing through the calculation of sunlight and the rule of triangles.

Spacing involves the following elements:

1 Sunshine spacing L = is the sunshine spacing, h house height, d local sunshine coefficient) 2 planning spacing is met according to the requirements of the planning approval.

3. Fire spacing High-rise and high-rise control 13m, multi-storey control 6m, generally disputes can be detailed local planning bureau to file an administrative lawsuit, dissatisfied with the ruling can be sued to the people's court!!

Look at the area and starting point written on your homestead use card, and measure it, and if that's your place, you don't have to deal with him, and if it's your over-occupancy, don't pay attention to him, and let him sue.

The normal ratio of floor height to spacing is 1:

Complain to your local planning authority.

D Answer Analysis: [Test Question Analysis] The provisions of the side spacing of the house should comply with the following regulations: (1) strip dwelling, which should not be less than 6m between multiple floors; The distance between high-rise and residential buildings of various floors should not be less than 13m; (2) Visual hygiene factors should be considered between high-rise tower houses, multi-storey and mid-rise point houses and various storey houses with windows on the side, and the spacing should be increased appropriately.

National standard floor area:

Height: Calculation of the proportion of floor area = .

According to national regulations (design specifications), the sunshine time of the winter solstice is not less than one hour (the bottom of the house window) as the standard. The spacing is the height of the cornice of the house built with an outdoor terrace, tan (a) sun height angle around noon on the day of the winter solstice. - The basic principles of the state design of the state standard GB50180-93 "Code for Urban Planning and Design" (the national standard of the People's Republic of China, implemented since February 1, 1994) of the national mandatory standard GB50180-93 "Code for Urban Planning and Design" (the national standard of the People's Republic of China, implemented since February 1, 1994).

The law of adaptation activities of residents to create a convenient, comfortable, safe, and beautiful living environment with the construction of facilities and management requirements, taking into account sunshine, lighting, ventilation, disaster prevention, and the construction of facilities. The "Article" stipulates that "the spacing of dwellings shall meet the requirements based on sunlight, taking into account the requirements of lighting, ventilation, fire, **, buried pipes, etc., and be determined to avoid visual interference." The popular understanding is this:

According to the national standard for ground space formulated by the Ministry of Construction, the height of the interior space of the dwelling should not be less than meters, and the distance between the building heights of each building should be not less than times the value of the system, if the value is less than the system, it will affect the indoor lighting, ventilation, and thus interfere with each other between the lives of residents and other problems.

It can be summarized simply into two:.

1. The sunshine time of not less than one hour on the winter solstice (the lowest solar altitude angle on the winter solstice) (the window of the lowest level house) is the standard;

2nd floor: Floor area =

There are no direct regulations on the height and spacing of houses, however, according to the General Principles for the Design of Civil Buildings and the Code for Planning and Design of Urban Residential Areas, the spacing of houses in large cities should be based on the minimum sunshine time of not less than 2 hours on the window sill surface of the ground floor (the lowest window of the house, referring to the location of the exterior wall high from the indoor floor) on a cold day.

If the height and spacing of the building cannot meet the above requirements, it will naturally not meet the regulations.

The spacing between the front and back of the house: the residential house in the ordinary community can be calculated by using: building height: building spacing = 1: ratio. In accordance with national regulations (design specifications).

Schematic diagram of the design standard for building spacing.

The winter solstice sunshine time is not less than 1 hour (the lowest window of the house) as the standard. The spacing is the height of the building from the outdoor lawn to the cornice of the house tan(a) a-the angle of the sun at noon on the winter solstice.

The spacing between the left and right of the house: 6 meters between multi-storey (4-6 floors and below) and multi-storey buildings, 9 meters between multi-storey and high-rise buildings (12 floors and above), and 13 meters between high-rise and high-rise.

The spacing between buildings (front and back) is calculated based on the sunlight spacing.

The so-called sunshine spacing: refers to the minimum distance between the front and rear rows of south-facing houses to ensure that the rear row of houses receives no less than one hour of full window sunshine on the ground floor on the winter solstice.

How to calculate the insolation spacing:

The calculation is based on the long side of the house facing the sun, the rising sun facing due south, and the noon sun shining on the window sill on the ground floor of the rear row of houses.

If the number of hours of daylight required in the living room increases, the spacing increases accordingly, or when the building is not facing due south, the spacing also changes. When a house is arranged on a sloping site, the sunshine spacing will change due to the different slopes and slopes of the terrain under the same sunshine requirements.

When the building is arranged parallel to the contour line, the steeper the slope is, the smaller the sunshine spacing. Conversely, the larger. Sometimes, in order to gain sunlight and reduce the spacing between buildings, buildings can be arranged diagonally or perpendicular to contour lines.

As can be seen from the figure, tanh=(h-h1) d, and the sunshine spacing should be: d=(h-h1) tanh;

Where: h—solar altitude angle.

h—the height from the eaves of the previous building to the ground;

h1 - the height of the window sill of the rear building to the ground.

d--- Sunshine spacing.

Of course, it can also be converted according to the sunshine spacing factor. Here we set the insolation spacing factor to l

D=L (H-H1) is converted from the sunshine spacing coefficient l=d (h-h1).

It is obtained: (h-h1) tanh= l (h-h1) 1 tanh=l tanh=1 l

The formula for calculating the insolation spacing is: insolation spacing d= l (h-h1).

In other words, you must first know the eaves height of the previous building before you can calculate whether building a house a few meters away from your home will affect the sunlight in your room.

In addition, it depends on whether the sunshine meets the 2-hour sunshine duration on a cold day.

1. Provisions.

1. Strip house: should not be less than 6m;

2. High-rise: should not be less than 13m.

2. Legal basis.

Code for Planning and Design of Urban Residential Areas

1) Strip dwelling, between multiple floors should not be less than 6m; The distance between high-rise and residential buildings of various floors should not be less than 13m;

(2) Visual hygiene factors should be considered between high-rise tower houses, multi-storey and mid-rise point houses and various storey houses with windows on the side, and the spacing should be increased appropriately.

According to the Code for Planning and Design of Urban Residential Areas, residential sunshine standards should meet certain regulations. For specific circumstances, the following provisions should also be met: (1) the residential building for the elderly should not be less than 2 hours of sunshine on the winter solstice; (2) The addition of facilities outside the original design building should not reduce the original sunshine standard of the adjacent residence; (3) The sunshine standard of new residential buildings in the project of reconstructing the old area can be lowered as appropriate, but it should not be less than 1 hour of sunshine on a cold day.

The frontal spacing can be controlled according to the number of sunshine in different directions determined by the sunshine standard. The spacing between the sides of the residence shall comply with the following provisions: (1) strip dwelling, which should not be less than 6m between multiple floors; The distance between high-rise and residential buildings of various floors should not be less than 13m; (2) Visual hygiene factors should be considered between high-rise tower houses, multi-storey and mid-rise point houses and various storey houses with windows on the side, and the spacing should be increased appropriately.