Can fire detection continue? Please, thank you

The professional level of the two personnel in our fire inspection center here (one is an electrical engineer and the other is a hydraulic engineer) is indeed a hundred times stronger than the people in our fire department! Let's see which of the current fire prevention supervisors is really putting their minds into doing a good job. Either busy running relationships, or making money, and one or two really attentive, may be just out of the squadron, or just graduated from school--- even if it takes a few years to train a few good businesses, or change jobs, or leave the post, go to the leadership department or other departments (the leadership is very heavy).

As for whether the people in the testing center perform their duties, I don't know, at least there is such a procedure, and there is one more hurdle, so that the engineering company will not make a mess of the project! Besides, you and I are not living in a vacuum, and everyone has more or less appreciated the taste of it---View the original post".

Fire Protection Law: Article 20 The quality of electrical products and gas appliances must meet national standards or industry standards. The installation and use of electrical products and gas appliances, as well as the design and laying of lines and pipelines, must comply with the relevant national fire safety regulations.

View the original post

Or don't check it.,At present, the opinions of the society on fire protection are basically focused on testing.,Think about how others used to be about fire protection.,Now we're constantly putting forward our opinions.,And some of them are still leaders of various departments View the original post".

We require all projects to be accepted, and the opening of public gathering places must have fire electrical inspection reports, but the testing unit does not have it in this region, and it is necessary to go to the province to find it, and I don't know when to queue up, how do you say to operate. Inadmissible? How long is that going to be delayed. View the original post

It doesn't matter if there is a test, even if the test is qualified, but whether it is compatible or not is up to the fire department to decide. A little more publicity to the outside world, testing is not in the same league as us. View the original post

But I think the inspection really has some effect, after all, the fire department doesn't have much energy to carefully inspect, and some problems are not visible, or even very serious. View the original post

We have no way to do fire inspection, which is stipulated by national law. [em14] View original post".

The electrical test report is just a reference! Why is it not accepted if there is no electrical test report? Where is there a provision that an electrical test report must be accepted before it can be accepted? View the original post

Electrical testing is just a team with a certain .........The means of finding money The above asks you to do it View the original post".

Legal Analysis: Yes, according to the law, building fire protection facilities are fully inspected at least once a year.

Legal basis: Article 16 of the Fire Protection Law of the People's Republic of China Organs, groups, enterprises, institutions and other units shall perform the following fire safety duties:

1) Implement the fire safety responsibility system, formulate the fire safety system and fire safety operation procedures of the unit, and formulate fire extinguishing and emergency evacuation plans;

2) Configure fire-fighting facilities and equipment in accordance with national standards and industry standards, set up fire safety signs, and regularly organize inspections and maintenance to ensure that the branches are in good condition and effective;

3) Conduct a comprehensive inspection of building fire protection facilities at least once a year to ensure that they are intact and effective, and the test records shall be complete and accurate, and archived for future reference;

4) Ensure that evacuation passages, safety exits, and fire truck passages are unblocked, and ensure that fire and smoke prevention partitions and fire spacing meet fire protection technical standards;

5) Organize fire prevention inspections and eliminate fire hazards in a timely manner;

6) Organize and conduct fire drills for sensitivity;

7) Other fire safety duties stipulated by laws and regulations.

The main person in charge of the unit is the person responsible for fire safety of the unit.

Yes, according to the law, the fire protection facilities of buildings are fully inspected at least once a year.

Legal basis: Article 16 of the Fire Protection Law of the People's Republic of China Organs, groups, enterprises, institutions and other units shall perform the following fire safety duties:

1) Implement the fire safety responsibility system, formulate the fire safety system and fire safety operation procedures of the unit, and formulate fire extinguishing and emergency evacuation plans;

2) In accordance with national standards and industry standards, configure fire-fighting facilities and equipment, set up fire safety signs, and regularly organize inspections and maintenance to ensure that they are intact and effective;

3) Conduct a comprehensive inspection of building fire protection facilities at least once a year to ensure that they are intact and effective, and the testing records shall be complete and accurate, and archived for future reference;

4) Ensure that evacuation passages, safety exits, and fire truck passages are unblocked, and ensure that fire and smoke prevention partitions and fire spacing meet fire protection technical standards;

5) Organize fire prevention inspections and eliminate fire hazards in a timely manner;

6) Organize targeted fire drills;

7) Other fire safety duties as provided by laws and regulations.

The main person in charge of the unit is the person responsible for fire safety of the unit.

Tanglong Fire Tips: According to the third paragraph of the first paragraph of Article 16 of the Fire Protection Law of the People's Republic of China, a comprehensive inspection of the fire protection facilities of the Huaizhi building shall be carried out at least once a year to ensure that they are intact or effectively buried, and the test records shall be complete and accurate, and archived for future reference.

The inspection of fire protection facilities is generally carried out by a fire inspection company with corresponding qualifications, while the maintenance company only maintains the building fire protection facilities and does not have the building fire protection inspection qualification. The specific time should be: from the date of the enterprise's fire acceptance, the annual fire inspection must be carried out after the next year.

Fire Engineering Inspector Responsibilities:

Engaged in fire safety technical work should be engaged in fire safety technology and management work for fire technical service institutions and key fire safety units, including building fire protection facilities.

Maintenance, building fire protection facilities inspection, fire safety evaluation, fire safety monitoring, fire extinguisher maintenance, fire consulting, fire safety training and other fire technical services, as well as engaged in unit fire safety management and fire protection facilities inspection, maintenance, management.

Functional testing of fire protection engineering, such as electrical system testing, fire hydrant system testing, sprinkler system testing, automatic fire alarm system detection, gas fire extinguishing system detection, water cannon system detection.

Different from the project supervision, it focuses on the inspection and testing of the first regiment or the functional aspects of the department, whether the system can play its due efficiency, and provide first-hand information for the fire department.

Those who apply for the qualification of fire technical service institutions shall submit the following materials to the fire department of the provincial public security organ where the institution is located:

1) Application form for qualification of fire technical service institutions;

2) A copy of the business license and other legal person identification documents;

3) The articles of association of the legal person and a copy of the ID card of the legal representative;

4) The list of employees and their ID cards, the qualification certificate of registered fire engineer and its social insurance certificate, the professional qualification certificate of the specific type of work in the fire protection industry, and the copy of the labor contract;

5) A copy of the capital verification certificate, the certificate of ownership of the premises, and a list of instruments, equipment, and facilities;

6) The relevant quality management refers to the manual documents;

7) Other materials provided for by laws and administrative regulations.

Those who apply for first-level qualifications shall also submit second-level qualification certificates and a catalogue of fire protection technical service projects undertaken within three years before the date of application.

Summary. Hello, kiss <>

Fire detection also needs to be metered, because measurement can evaluate the function and performance of firefighting equipment and systems through testing and measurement, such as fire alarm systems, fire extinguishing systems, evacuation routes, etc. <>

Do you still need to measure for fire detection?

Hello, kiss <>

Fire detection also needs to be measured, because the first measurement can evaluate the function and performance of firefighting equipment and systems, such as fire alarm systems, fire extinguishing systems, evacuation routes, etc., through testing and measurement. [Approve of hand disturbance].

Hello <> kiss Yusan

Fire detection measurement usually includes the following aspects: 1. The response time and accuracy test of the fire alarm system. 2. Test the pressure and spray range of the fire extinguishing system. 3. Evacuation channel capacity and safety test.

Hello dear <>

The metering of fire detection can also include regular maintenance and overhauls to ensure the long-term nuclear reliability and stability of firefighting equipment and systems. This includes regular inspections, recalls, replacement of parts, etc., as well as simulated fire tests to evaluate the performance of firefighting equipment and systems in the event of a virtual fire in the real chain. <>

Hello dear <>

The legal basis of the "Fire Protection Law of the People's Republic of China" stipulates that the fire protection rules or recreation facilities of the building shall meet the national standards, and shall be regularly tested, maintained and maintained. <>

Legal analysis: It needs to be determined on a case-by-case basis. The construction unit shall provide the following materials for the application for fire protection acceptance:

A) the construction project fire acceptance declaration form; (B) the project completion acceptance report and the relevant fire protection facilities of the project completion drawings; (C) fire product quality certification documents; (D) with fire performance requirements of building components, building materials, decoration materials in line with national standards or industry standards of the certificate, factory auspicious certificate; (E) fire protection facilities testing certificates; (F) construction, engineering supervision, testing units of legal identity and qualification level certificates; (7) The industrial and commercial business license and other legal identification documents of the construction unit; (8) Other materials provided for by laws and administrative regulations.

Legal basis: "The People's Republic of China Guess the Fire Protection Law" Article 14 The specific measures for fire protection design review, fire protection acceptance, filing and random inspection of construction projects shall be prescribed by the competent department of housing and urban-rural development.

The right to acceptance, building fire protection facilities testing is to test the specific technical performance indicators of building fire protection facilities in the specified method for each system of building fire protection facilities, so as to determine whether the building fire protection facilities meet the indicators specified in the specifications and requirements, and ensure that the building fire protection facilities can achieve the expected use effect.

Building fire protection facilities are an important measure to ensure the fire safety of buildings and the safety of personnel evacuation, and are an important part of modern buildings. According to the statistics of the American Fire Protection Society, in recent decades, fires have occurred in buildings with building fire protection facilities installed in the United States, and the effectiveness rate of fire protection facilities is as high as high, which has played a good role in ensuring the safety of buildings.

In China, according to incomplete statistics from the Ministry of Public Security in 2010, among the more than 400,000 buildings equipped with automatic fire-fighting facilities, the intact rate of fire-fighting facilities is only 30% to 40%.

There is no right to accept, fire testing can also do electrical testing and lightning protection testing, for qualified projects to issue CMA certification and accreditation of qualified reports, electrical fire protection lightning protection testing can be contacted or cooperated.