How to set the routing function of the router ISP?

1. Power on the router to work, and then plug one end of a network cable into the WAN port of the computer, and the other end into the LAN port of the router.

2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the user name is admin, the password is blank, click to log in, and enter the settings home page of the router.

3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly.

The connection mode selection is always filled in with the mtu value of 1492. The save is done.

4. The wireless router also has a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.

On the router management interface, click "Basic Settings", then "WAN Port Settings", "WAN Port Settings", and check and confirm that "Participate in Traffic Balancing" is checked. Click "Transport Control", then "Traffic Balancing", then "ISP Routing", then "Enable ISP Segment Routing", and then "Settings". In ISP traffic selection, select WAN1 ETH as interface, select the corresponding broadband carrier in ISP settings, click Add, and add WAN 2 port routing settings in the same way.

Click "Transmission Control", then click "Traffic Balancing", then click "Basic Settings", check "Enable Smart Balancing", select the corresponding two WAN ports in the Internet interface, and click "Settings".

Now the network has entered most people's homes, most families will also install routers to surf the Internet, there are actually many functions of routers, sometimes we also need to master some router functions, so do you know how to set up the router ISP routing function? The following is some relevant information about how to set up the routing function of the router ISP for your reference.

The first step in setting the routing function of the router ISP is to set the WAN port.

Multi-WAN port routers can connect to multiple broadband lines to achieve bandwidth superposition and line backup, thereby improving network stability. However, if multiple broadband lines are not connected to the same operator (broadband service provider), it may cause access bottlenecks (e.g., data from the telecom network is routed through the Unicom network), resulting in network delays.

Large, packet loss, etc. The ISP routing function of the enterprise wireless router can avoid the above problems and ensure that the data accessed from the corresponding ISP network is accessed through the correct outbound interface.

ISP routing topology.

An enterprise uses an enterprise router to connect two broadband lines, WAN port 1 is telecom broadband, and WAN port 2 is China Unicom broadband. It is necessary to realize that the traffic accessing the telecom server goes through the telecom line, and all the traffic accessing the Unicom server goes through the China Unicom line.

On the router management interface, click Basic Settings >> WAN port settings, and set the network parameters and real bandwidth of the WAN port, as shown in the following figure.

Step 2 of setting the ISP routing function of the router: Set the ISP routing function.

Click Transport Control >> Traffic Balancing >> ISP Routing, check Enable ISP CIDR Block Routing, and click Save. In the ISP routing settings, select WAN1, select the corresponding broadband carrier in the list of available ISPs, click the Add button to add the broadband line to the list of selected ISPs, and click Add. As shown in the figure below (in this case, telecommunications);

Similarly, if you add the routing settings for WAN2, the total routing list is shown in the following figure.

Note: If your broadband line is not in the list (such as Great Wall Broadband, Radio and Television Broadband, etc.), select Other as ISP Routing Selection.

The third step of setting the routing function of the router ISP is to enable intelligent balancing.

Click Transmission Control >>Traffic Balancing>> Basic Settings, check Enable Smart Balancing, select the two corresponding WAN ports in Select Internet Interface, and click Save.

At this point, the ISP routing function is set up, and the traffic to the telecom site is determined by the telecom line**, and the traffic to the China Unicom site is by the China Unicom line**. Achieve faster access to network resources.

1.How Do I Configure ISP Routing Function?

2.TPLink routers use the ISP routing function.

3.How to set up a policy routing policy.

Summary. Check the dial-up settings under the Network Configuration menu.

ISP refers to the network service provider, and the ISP must first provide access to the Internet at home or unit, and the access methods are different, and the settings are also different, such as optical fiber direct connection, PPOE dial-up connection, etc.

The router works at the third layer of the open systems interconnection reference model, a network interconnection device at the network layer. It uses a routing algorithm to select a path from several routes to a destination for packets traveling over the network.

Check the dial-up settings under the Network Configuration menu. ISP refers to the network service provider, the home or unit Internet access must first be provided by the ISP, the access mode is different, the settings are also different, such as optical fiber direct width Qi connection, PPOE dial connection and so on. The router works at the third layer of the open systems interconnection reference model, a network interconnection device at the network layer.

It uses a routing algorithm to select a path to the destination from several routes for the data band slip packets transmitted over the network and make **.

Summary. Hello dear! ISP stands for Internet Service Provider, which is a business or organization that provides Internet access services.

The ISP behind the router usually refers to the Internet service provider that the user is connected to, that is, the company or organization that connects the user's router to the Internet. For example, if your router is connected to China Telecom's network via cable or fiber, then China Telecom is the ISP behind your router.

Hello dear! ISP stands for Internet Service Provider, which is a business or organization that provides Internet access services. The ISP behind the router usually refers to the Internet service provider that the user accesses, that is, the company or organization that connects the user's router to the Internet Guess Ear.

For example, if your router is connected to China Telecom's network via cable or fiber, then China Telecom is the ISP behind your router.

Then the ISP username and password are specific to the ** behind the router.

Which one is it? Pro, the username and password of the ISP are usually provided by the internet service provider, not on the label on the back of the router. If you are a new user, you will need to contact your ISP to obtain a username and password.

If you already have this information, you can enter them in the router settings page to connect to the Internet. The specific operation method may vary depending on the router brand and model, but it is usually set in the "WAN Settings" or "Internet Settings Wooga" in the router's settings page. If you are not sure how to set it up, please refer to your router's user manual or consult your ISP.

Dear, ISP is a network interface.

It's the interface that connects the network cables.

ISP stands for "Internet Service Provider", which is a telecom operator that provides Internet access services, information services, and value-added services to users across the country.

For a long time, access to ISPs is wired (that is, the usual "dial-up Internet"), bandwidth has always been a bottleneck that limits people's Internet speed, and some ISPs in the world have begun to develop and use wireless technology to solve this problem. The "wireless ISP" is the service function of the ISP that is accessed wirelessly, and the service has a good momentum of growth and application in recent years.

The router supports "wireless ISP", and the device that also needs the ISP supports "wireless ISP", so that it can access broadband Internet access wirelessly. With the current domestic situation, the vast majority of them do not support this model.

ISPs are Internet Service Providers. It provides dial-in accounts for the Internet and serves as an entry point and bridge for network end users to access the Internet. At present, the largest ISP in China is China Telecom 163, and some cities also have Internet access providers such as Jinqiao and Yinghaiwei.

It is to receive wireless signals directly.

Instead of receiving signals from cats.