Why is the indication a little wrong every time I stand on the scale?

People will move on the scale, but also look at the speed of your squatting and standing up, if it is slow, the reading of the scale will not change, if it is fast, the body is in a state of overweight and weightlessness, the reading will change. Changela body fat can accurately measure a number of data of the human body, and can also be connected to a mobile phone to use.

Mechanical scales can also have such problems! It's just that the accuracy of the mechanical scale is not high, and it can't be expressed in the reading. Generally, the accuracy of the electronic scale, the four corners of the adjustment is better, you said that the position of the different weight of the problem does not exist, you said that this situation will lead to poor repeatability, so it is recommended that you buy a better electronic scale.

Weighing accurately won't be a problem for you.

Listening to your description, it may be an electronic station, and it is better to take it to the maintenance department to help you adjust it. After all, the accuracy of electronic scales is relatively high, and the weighing accuracy of electronic scales is still very high, and mechanical scales have basically been eliminated.

It depends on how fast you squat and stand up, if it is slow, the reading of the scale will not change, if it is very fast, the body is in a state of overweight and weightlessness, the reading will change.

Every time you stand on the scale, there may be many reasons why the indication is a little off. Here are some possible reasons:

1.The position of the weighed item is incorrect. When using a scale, you need to place the weighing item in the center of the weighing pan to avoid skew or tilt, which can cause the scale to read inaccurately.

2.Poor balance of the scales. Before using the scale, you need to check the balance of the scale, if the scale is not balanced, it needs to be corrected, otherwise the accuracy of the scale will be affected.

3.The scale has been used for too long. Long-term use of the scale can lead to wear and tear on internal parts, which can lead to inaccurate readings on the scale.

4.There is a problem with the scale's sensor. The sensor is the heart of the scale, and if there is a problem with the sensor, it can cause the scale to read inaccurately.

5.Environmental factors. Environmental factors such as temperature, humidity, vibration, etc., can also have an impact on the accuracy of the scale.

6.Standing position and posture. Different standing positions and postures may affect the weighing results.

7.Whether it remains stable. Maintaining stability while weighing also helps to achieve more accurate results.

The above are the possible causes, and in order to get more accurate weighing results, you can try to rule them out or use a more precise measurement tool.

This is normal! It's not that the scale is broken, but because the electronic scale allows errors, the position of each station is not the same, the weight display is not the same, it has a four-corner balance positioning sensor, if the gap is very large, it is a problem with the scale, and it needs to be sent for maintenance.

The oldest evidence of the existence of scales dates from 2400 BC to 1800 BC in the Indus Valley (in present-day Pakistan). Prior to this, there was no standard and precision that could measure body weight. In Egypt, scales date back to about 1878 BC, but their use may have extended much earlier.

Scales in the true modern sense were improved and invented by Leonardo da Vinci.

By the 40s of the 20th century, various electronic devices were connected to these designs, which made the readings more accurate. These are not true electronic scales, and the actual measured weight still relies on load cells, small nodes where pressure is converted into a digital signal. It is only when it is close that there is an electronic scale in the real sense.

The role of the scale is mainly manifested in its essential use, it can accurately weigh the weight of the human body, and through the daily weight change, reflect the weight control of a certain period of time, weight control is the basis of health management, therefore, modern people had better have a weight scale in each family to grasp the weight of the whole family, which is a very important item to ensure the health of the whole family.

1. Determine whether the battery of the electronic scale is sufficient, and the old sales file should be replaced in time when the battery is empty, and the insufficient power will lead to the inaccurate display of the electronic scale.

2. Place the electronic scale horizontally on the floor, if the electronic scale is high and low, or there is an elevation angle with the horizontal plane, it will lead to inaccurate weighing.

3. Stand upright on the electronic scale with two feet, do not shake the body from side to side, and do not weigh with one foot or squatting, which will lead to inaccurate weighing.