Why can t the computer turn on the phone after a long ring, and it is still the same after changing

Hello! Constant ringing (long sound) – the memory is not plugged in or damaged.

Ringing non-stop – the power supply, monitor, and graphics card are not properly connected.

Repeated, short rings – power failure.

The keyboard is not plugged in tightly, and if it is an old case, the new case in the last two years may be a broken motherboard.

It should be that the memory module is not plugged in.

There is a problem with the hardware detection of the system boot. It is recommended to check the computer from the place where it is newly sent for repair. If there is no problem before sending it for repair, it must be a problem during the repair.

Please don't believe the maintenance staff's so-called owner who broke it himself. More eyes, less money. Good luck..

Helpful to you!

It is recommended to discharge the BIOS battery (restore the BIOS factory default), it is recommended to plug and unplug the graphics card and memory, clean it up, and use an eraser to polish the gold finger of the graphics card and memory.

Memory slots, graphics card slots.

You check the "motherboard alarm sound", different motherboards will have different alarm sounds for the same kind of failure.

It may be a motherboard problem, or it may be another problem, and it may not necessarily be fine if you change the memory.

That's the CPU fan'Dusty, right?

You see if the memory plug is dirty, it's better to scratch it with something.

It's like that, it's like that, and I've had such a situation before.

The motherboard has alarmed, and it must have not been plugged in.

There may be loose or damaged hardware.

There is noise in the computer after the memory module is installed, which is caused by the corruption of the computer's memory module, and the specific solution is as follows:

1. First of all, turn off the power of the computer and unplug all the wires connected to the computer

2. Then, open the case of the computer, and then you can clearly see the internal structure of the computer

3. Then you need to find the location of the memory slot inside the case

4. You can see that one side of the memory module has been cocked and detached from the buckle

5. Chunchun pressed it with his hand, so that both sides of the memory module were stuck on the buckle, and then closed the box and turned on again without noise

Summary. Hello, this situation is ticking, and it has been a long sound, which is the alarm sound that the computer motherboard thinks that the memory has not been found.

Why does the memory stick keep ringing when it is turned on as soon as it is installed?

Hello, this situation is ticking, and it has been a long sound, which is the alarm sound that the computer motherboard thinks that the memory has not been found.

How to fix it. First of all, you check whether the memory is well inserted. Generally, if it is not plugged in, it will be checked and alarmed, but sometimes it is not called or the buzzer is broken, and the alarm cannot be heard. Reinsert it carefully.

First of all, you check whether the memory is well inserted. Generally, if it is not plugged in, it will be checked and alarmed, but sometimes it is not called or the buzzer is broken, and the alarm cannot be heard. Reinsert it carefully.

In addition, if there are multiple memory modules, they may be incompatible.

If there are multiple pieces of memory, plug in a separate test to see if it is normal. to determine whether the pure carry is a single quality problem or incompatible. Or try to do a difference volt test on the two memory swap slots.

If it doesn't work, pay attention to see if the new memory and the old memory are the same frequency. In addition, the new memory should use double-sided memory as much as possible, which is more compatible.

Then the boot has been ringing two short and one long?

Wait a minute. Causes of one long and two short sound failures when booting up: It may be that the graphics card is loose or the graphics card is wrong (or damaged).

In this case, you need to shut down the computer first, remove the graphics card, wipe it down and try to reinstall it.

When you put on the memory module, it keeps ringing two short and one long, which is why.

If you follow all of the above, there may be a problem with a memory card, dear.

You can see the inexpensive memory module configuration of the computer in **.

Hello, first of all, enter "dxdiag" in the runtime

If a DirectX Diagnostic Tool dialog pops up and prompts us if we want to check, click OK.

Then you can look up the configuration.

This is also a way to find, pro.

How to turn on the computer vt

First of all, when you turn on the computer, press and hold F1 or F10 to enter the BIOS setting interface, which mainly depends on the motherboard model of the computer.

Then operate the "Advanced" menu by controlling the arrow keys, and then double-click to select "CPU Setup".

Once in the menu, you can select "virtualization technology" by using the arrows.

After selecting Disable, press the "+" on the numeric keypad and select "Enable".

After enabled, you can press F10, select Yes, save and restart, and VT can be enabled.

What if the way it started was traditional?

After the computer is plugged in the memory module, it keeps dripping, and it can't be turned on, what should I do?

You need to clean the main chassis of the computer, and clean up the dust in the main chassis after opening the main chassis. If our computer is running and we feel that it is running slowly, we can choose to clean up the CPU dust of our computer at this time. You can enter the hardware detection function page of our Tencent PC Manager and test our computer hardware.

For users with aging computer systems, we can choose to use Tencent PC Manager to speed up our computer, enter the main page of Tencent PC Manager's toolbox, and click to enter the relevant page to speed up our computer immediately. Of course, if you have clearly determined the cause of the computer hardware problem based on the above, you can disassemble the case yourself and repair the hardware device that has the problem in the case. For example, if the chassis emits a continuous dripping sound at equal intervals, it means that the memory module is not plugged in properly or there is a problem, and we can replace or re-insert the memory module.

But if you don't dare to do it yourself, you can take your computer to a repair point for repair.

Why does the memory stick keep ringing when it is turned on as soon as it is installed?

After the memory module is installed, the computer has noise, which is caused by the damage of the computer's memory module, and the specific solutions are as follows: 1. First of all, turn off the power of the computer, and unplug all the wires connected to the wild Wangqi computer: 2. Then, open the case of the computer, and then you can clearly see the internal structure of the computer

3. Songru then needs to find the location of the memory slot inside the case: 4. You can see that one side of the memory module has been cocked and detached from the buckle: 5. Press it by hand to make both sides of the memory module stuck on the buckle, and then close the case and turn on the machine again There will be no noise:

After ruling out the reason that the memory module is not installed properly, it is most likely caused by the incompatibility of the memory module.

Attention should be paid to the installation of memory modules:

1. What kind of memory module to add depends on what the original memory of the computer is. The most important consideration for expanding memory is compatibility.

2. Pursuing high clock speed too much without considering compatibility issues will lead to unstable memory or failure to boot.

3. It is more appropriate to use the original memory module version to slightly increase the memory module capacity value.

The memory module is incompatible, and the self-test cannot be passed.

1. Take an eraser to erase the gold finger.

2. Try a different memory slot.

3. Replace the original memory.

4. Your motherboard does not support new memory modules, so get a new one.

The memory is not plugged in, or the memory is incompatible. Unplug the memory and reinsert it to see, it still doesn't work, only to change the memory.

Then the problem lies in the memory module. Try unplugging it again, or you can replace it with another memory module

If the memory is not compatible, try it again, or get one from another old computer.