What should I do if the iPad touch is not sensitive?

1. When using, if the screen fails, you can press and hold the home button in the lock screen state and then you can enable the voice control function. Then at this time, say "****" to select ** song, and then select the touch function to resume. You can wait a while, and then you can see that the touch screen issue is fixed.

2. You can also wait for the power to run out, and it will enter the state of automatic shutdown. Charge at this time, and then resume operation on the touch screen when the device is turned on.

3. You can connect your iPad to iTunes, and then you can upgrade your iPad to the latest version of iOS.

Jailbroken users need to note that iOS version upgrade cannot be done directly on iTunes).

Causes: 1. Screen hardware problems.

2. Cable failure.

3. System version bugs.

The iPad touch screen is not sensitive, it is caused by the occasional malfunction of the iPad hardware program, you can try the following methods to solve the problem:

1. Shut down and restart your iPad to see if the iPad touch screen is restored.

2. Restore all settings to the iPad, and the specific restoration process is as follows:

1. Take iPad as an example, light up the iPad desktop, click the red box to select the "Settings" option, and enter the next step.

2. Click on the "General" function option, find the "Restore" option on the right, and click to enter the next step.

3. Click on the "Reset All Settings" option to go to the next step.

4. Enter the password set by your iPad and click the "Done" option to restore your iPad to factory settings.

3. If you can't solve the problem, you can bring the warranty card, invoice and so on to the local Apple after-sales service center for testing and maintenance.

Potential solutions:

Press and hold the Sleep & Wake button for a few seconds, then Slide to Power Off. If the touchscreen still doesn't work, try holding the Wake to Sleep button and the Home button at the same time for 10 seconds.

Once the iPad Air is turned off, gently wipe the screen with a microfiber cloth.

If the iPad Air has a screensaver on it, it is the "culprit" of the problem.

Try pressing the "Home" button three times in a row, or go to Settings > General > Accessibility to make sure VoiceOver isn't turned on.

The reasons for iPad touch screen failure and the solutions are as follows: 1. If the screen fails, it may be because the iPad has too much cache and it is dead, you can try to force restart the iPad to see if it can be solved. 2. In daily use, remember not to open too many background programs, and often clean up the background.

3. Sometimes the stuck screen is also related to the iPad system, please upgrade the iPad system to the latest version. 4. If none of the above methods can be solved, and you suspect that the iPad has a screen cable failure, it is recommended to go to the iPad after-sales point for testing and repair. Such failures are usually caused by the following factors:

1. The working temperature of the screen is generally above zero degrees when the weather is too cold, which is of course a theoretical value, but it may actually be higher. When it's cold, the screen doesn't reach the operating temperature, which is naturally reflected visually in touch glitches. When the iPad goes from a low temperature to a relatively high temperature and is relatively humid, there will also be water mist on the original.

These fogs are likely to be invisible to the naked eye but can affect their use. 2. Applications.

Failure causes a crash Crash means that the machine does not respond, and naturally the screen will not change. As a loyal Apple user, I haven't encountered this problem yet. If you've ever jailbroken, you'll have a better chance of encountering it.

Causes and solutions for Apple tablet screen failure:

1. If the machine is jailbroken, it may be a problem of system instability. It is recommended to reflash the system or restore the system to resolve this issue.

2. Regardless of whether you are jailbroken or not, you can connect to iTunes to recover it again and see if there will be any problems.

3. You can also restart it, press the power button + home button, and don't let go until the Apple logo appears. Try again, if the situation is still not solved, it is estimated that it is necessary to change to a new tempered glass, professional point called (touch screen).

4. Connect the iPad to the computer, open iTunes (on the computer on the official website**iTunes), click on the iPad icon and you will see that there are two buttons for update and recovery, click Recover.

5、If there is a situation, it is a failure inside the screen,It is recommended to go to the Apple direct store in Beijing or Shanghai for after-sales,You must not jailbreak before after-sales,The machine is not guaranteed after jailbreaking。

If the problem is caused by touch screen problems or incorrect settings, the following solutions are as follows:

1. First of all, click on the crack to open the settings of the iPad tablet, as shown in the figure below.

2. If the match is missing, then in the settings page that opens, click to open the touch ID and password.

3. Then in the right column of the page that opens, click Add Fingerprint on the right.

4. At this time, in the open page, put your finger on the home button and move it away.

5. Finally, repeat this step, and finally complete the addition, as shown in the figure below.

Apple's iPad screen is not sensitive, wipe the screen first, and then touch it after it is clean, if it is still not sensitive, upgrade the operating system of course, or replace the inner screen.

What should I do if the iPad is not sensitive to touch? 1: Screen hardware problem.

2. Cable failure. 3：

System version bugs. It is recommended to restore the system to fix the bug issue. The operation is:

Connect your iPad3 to your computer with a data cable. Step 3: In the summary interface, click "Restore iPad" and follow the iTunes instructions to restore the system version.

Hope it helps.

Causes and repairs of ipad4 touch screen failure; (1) Press and hold the "Sleep and Wake" button for a few seconds, and then "Swipe to power off". If the touchscreen still doesn't work, try holding the Wake to Sleep button and the Home button at the same time for 10 seconds. (2) Once the iPad is turned off, gently wipe the screen with a microfiber cloth.

3) If the screen saver appears on the iPad, it is the "culprit" of the problem. (4) Try pressing the "Home" button three times in a row, or go to the general --- accessibility function --- Settings to make sure VoiceOver is not turned on.

iPad touch screen failure repair tips.

Flat screen failure (or partial failure) is generally in two cases:

One is the system failure, which can be solved by restarting or flashing the official firmware.

The second is hardware failure: generally the touch screen is not in good contact, which is related to the cable interface.

It is recommended that you try restarting the tablet (the hole under the power button, inside is the reset button); Flash the official firmware again to confirm the perfect flashing and rule out system problems.

If you do the above two seriously, the screen still doesn't work, it's a hardware problem. Earlier you mentioned that when you open the back cover, you can check whether there is a problem with the cable of the motherboard and the screen link, if there is no problem, then it is determined that the screen is broken, and you can only go for repairs.

General touchscreen fault handling and recovery methods:

1. Hardware damage.

Physical damage.

1. The touch screen and buttons of the mobile phone are all out of order (sometimes suddenly normal and all out of order).

It may be that some of the original parts of the touch screen are loose or damaged, and they need to be sent to the hospital for reinforcement and welding, or the screen or components need to be replaced

2. The touch screen of the mobile phone is out of order, and the buttons are normal.

The touch screen is loose and damaged, and it needs to be sent to the doctor for repair or replacement] (there are also normal software and CPU failures, but they are rare).

3. The touch screen of the mobile phone is biased, which can be corrected, but it is still biased after correction.

Restore the factory or grid code piece (the last 1m) when calibrating deliberately changing the touch screen].

4. The correction screen will be displayed when the mobile phone is turned on, which can be calibrated, but it cannot be completed to keep the calibration.

Need to replace the touchscreen grid tablet].

5. The mobile phone touch is out of order, and the disassembly is normal. The installation is out of order.

The four sides of the touch screen are too tight, remove the sealing strip, and the root of the touch screen lead is broken and virtually connected

Other hardware damage or affects:

1 Personal usage habits: Frequent game playing or operation will cause problems such as screen heating, and the screen may be burned out! Only the screen can be replaced

2 Battery failure, which can be solved when using a charger or data cable.

3.Affected by magnetic fields, [away from magnetic fields or degaussing treatment].

4.Affected by static electricity, sweat and oil, the human body may appear in specific situations, and should be actively cleaned and protected.

5.High temperature and low temperature, the ambient temperature has a great impact on the touch screen or the overall machine.

Hello! This should be a hardware failure, and it is recommended to send it to Apple for after-sales maintenance.

This type of failure is usually caused by the following factors:

1.It's too cold.

The operating temperature of the screen is generally above freezing, of course, this is a theoretical value, in practice it may be higher. When it's cold, the screen doesn't reach the working temperature, which will naturally be intuitively reflected as touch failure.

Water mist may also appear on the original when the PAD is moved from a low temperature to a higher temperature and a more humid place. These water mist are likely not visible to the naked eye, but can affect use.

2.An application glitch is causing a crash.

Crash means that the machine does not respond, and the natural screen will not change. As a loyal Apple user, I haven't encountered this problem yet. If you've ever jailbroken, you'll have a better chance of encountering it.

If the pad has just experienced a temperature change, you'd better put her in a warmer place for a few minutes or even an hour or two, force yourself not to think about it, and then look at it.

What should I do if the ipad touch is not sensitive, then you give him a shutdown and restart?