Apple laptop 360 free wifi can t find why, please, everyone, thank you

If it is not supported, it may be viewed in the original post

It's not the wifi function that comes with the computer, so it's normal to not find it.

However, I don't recommend you to use such free software, which will cause damage to your computer's wireless network card after a long time.

The computer will freeze, or the screen will not light up.

It is a hardware device, which will not cause any harm to the computer, but will protect the safety of the Internet.

It shares computers, broadband networks, transmits wireless networks, and uses free wifi for mobile phones and tablets.

Hope it helps, hope.

In fact, the wireless network card that comes with the computer is best not to use the wifi frequently, which is easy to cause the network card load to increase.

That's how I used to change the system several times to solve this problem, and it was annoying to watch.

The signal of this new portable wifi is quite good, and it is better than the wifi tools I used before.

And there are a lot of functions, and it can also be easily carried around, ** is only more than 10 yuan.

If you have a computer, you can use this portable wifi, whether it is to receive wireless or ** wireless is very convenient.

360 free wifi does exist, he is an auxiliary function of the 360 security guard, to be precise, it was called even me wifi when it was first launched, but why can't some netizens find it? The reason is that 360 Security Guard started to add the function of connecting me wifi in the beta version, but this feature was canceled in the official version and later versions! Know the current version to rejoin and change the name to free wifi!

Pay attention to the version number in the picture below.

The problem is found, that is, there are several versions of 360 security guards that have canceled this function, and the latest version has been renamed to add this function! Then to find 360 free wifi, just upgrade 360 Security Guard to the latest version!

Select "Free WiFi" on the uninstalled feature page, and click to complete the installation!

Once the installation is complete, the free wifi starts automatically!

Is it set to start 360wifi when it is turned on? Turn it off and on again.

Mac has a shared network setup that works as follows.

First of all, connect your MacBook to Ethernet, which is commonly referred to as broadband;

Then, open System Preferences and tap on "Sharing";

At this time, of course, you need to unlock your lock first, so that you can make changes;

Generally, at this time, the "Internet sharing" on the left is grayed out, and you can't choose it, so you need to configure your network first;

In "Share with a computer with the following ports", select "Wi-Fi" decisively.

Then click on "Wi-Fi Options" and enter the name of the network you want to create;

For security, it is best to select "wap2 personal", and then enter at least 8 digits of password twice below;

If the Wi-Fi is not turned on, it will also alert you;

At this time, the "Internet Sharing" on the left can be selected, tick it!

On the dialog box that pops up, select "Start", and the MacBook has already created the network;

No 360 free wifi, no Mac version.

It seems that 360 portable wifi does not support Mac system.

Without this thing, 360 free wifi does not support DMG format yet.

If you are connected to Wi-Fi, you cannot share Wi-Fi.

In this case, it is recommended to reinstall the wireless network card driver, and then re-open the free wifi in the 360 security guard to solve it, I hope it can help you.

1.First of all, make sure that the 360 connection wifi on the computer is turned on In the Control Panel - Network & Internet - Network & Sharing Center - Change Adapter Settings Find the 360 new wireless connection The general name is Wi-Fi 2

2.Right-click on Wi-Fi 2 Properties and find i

It's just a little troublesome, so these software came out... If you try the wifi sharing wizard, first make sure that your Wi-Fi is turned on and the LAN driver is installed.

The prerequisite for using the free Wi-Fi function of 360 Security Guard is that the computer can access the Internet, otherwise it will not be used. Because it uses the computer as a hotspot, creating a wireless network for mobile phones, tablets, other laptops and other devices to use for free Internet access.

1.Upgrade the security guard to the latest version, in the function list, there is a "free wifi", click**. (If there is no "free wifi" here, click "More" next to it to check it).

2.On the pop-up 360 free wifi interface, there will be a wifi name and wifi password, open the mobile phone or other devices, search for this wifi, enter the password and you can use it. Click the pen icon behind the name and password to change the name and password.

How to use 360 free wifi. Here's a detailed introduction, you can refer to it before setting it up.

Is it XP's? XP basically can't use 360wif

Causes: 1. Mobile phone firmware problems.

2. The wifi parts need to be repaired.

3. The mobile phone wifi setting is wrong.

Solution: 1. Wipe and restore all previous WiFi settings.

2. Turn on the wifi option again.

3. There is a blue arrow number next to many wireless networks, click the blue arrow and then click Ignore this network.

4. Go back to the main interface and turn off the phone and restart.

5. After restarting, enter the WiFi settings page to set up the WiFi.

6. Go to the mobile phone repair point to check whether the wifi parts of the mobile phone are damaged.

Android phones need to go to the official website to install 360 free wifi to use, and the mobile phone itself can't receive the free wifi signal system sent by the computer.

It may be that there is a problem with the wifi link of your mobile phone, and my mobile phone has also encountered the same problem, and it will not be able to connect after a while.

Generally, this kind of problem is on the computer side, you look at the 360 free wifi settings, whether there is a kick you out or speed limit, etc.

Mainly due to the following reasons:

1. The computer must have a wireless network card, or 360WiFi hardware.

2. The wireless function must be turned on.

3. The driver installation is not suitable.

4. If 360wifi, the connection is unstable.

Replace the interface.

"There are two situations that cannot be used, one is the desktop, and the other is that it is in the wifi network, that is, the computer itself is connected to the wifi, which will fail.

The laptop you use is still a desktop, the laptop must turn on the wireless device before you can use 360 free wifi, the desktop needs an external wireless network card to use this function, and the machine without the wireless network card module cannot enable the function! When activated, this function can transmit wireless signals and connect to mobile phones and other wireless Internet devices! But the internet speed may not be very fast!

There's something wrong with your computer, or your computer doesn't have a wireless card.

Let your roommate open a hotspot, you can't open it, others can't open it, Xiaomi mobile phones can also use the computer network to share the wifi network.

If you want to learn how to use your phone to share a computer network, I can teach you.

It should be no settings, see if there is a problem with the wireless settings.