Cable TV Broadband for Wireless Router 15

If you have a router at home, if you want a strong signal, you don't necessarily have to buy two routes.

You can consider using portable wifi to enhance the signal of your routing.

I've been using it for a while and I think it's pretty good, and I just bought it cheaply to try it.

Who knows it's quite effective, I hope it helps you, hope.

You can directly select two routers to set up a wireless bridge through WDS.

The first router doesn't need to be moved, and the second router changes the LAN port settings (

The second router goes to WDS, finds the MAC address of the first wireless router, and clicks to connect.

Of course, many people may not understand, so go to the Internet to read the tutorial first, or find someone who understands this aspect to help you set it up.

I also often use this portable wifi at school, and generally speaking, it's pretty good, and the wireless signal is OK.

If you have a laptop in your study, you can plug in this portable wifi to receive the wireless signal from the router.

Personally, I think this is a pretty good way to do it, and it's much easier to set it up than a router.

How to install a router for broadband cable TV:

Connect the network cable from the broadband modem that comes with the cable silver to the TV broadband to the WAN port of the router.

Connect the network cable you bought from the LAN port of your router to your computer.

Set up your router.

You are required to enter your username and password, enter OK, and the router will have an IP address to surf the Internet.

Cable television (CATV) is a system that uses coaxial cable as a medium to directly transmit TV and FM radio programs to user TV.

Cable television is widespread in Canada, the United States, Europe, most of the Asia-Pacific region and many Asian countries, although cable television is now not gaining much ground in many South American, Middle Eastern and African countries because it is quite uneconomical to lay cables in these sparsely populated areas, especially in South Africa"Wireless cables"Or microwave-based ground systems can be used"Directly to the door"Satellite TV is even more widespread.

As with radio broadcasting, many channels can be transmitted on a single cable using different frequencies without interfering with each other. A TV tuner, VCR or radio can pick a channel from a mixed signal.

This is very simple, first of all, if you use a network set-top box at home, then this network set-top box must support wifi, after connecting a wireless router to the home network cable, connect to this wifi network through the wireless function of the set-top box. If you don't use a set-top box, the TV must have a wireless function, and the wireless network card of the TV can be connected to the wifi of the wireless router, which can also achieve the purpose.

Add a wireless router so you have wireless wifi so you can use wireless.

1. Connect the broadband modem, router, and computer with network cables.

2. Log in to the router's settings page, generally, (or refer to the bottom label or manual of the router.)

3. After logging in to the router settings interface, change the LAN port IP to. Once saved, exit the router settings.

4. Plug the network cable from the broadband modem back into the WAN port of the router. Log in to the router settings page again. Click on "WAN"."Dynamic IP", click "Reply to MAC address" (or clone MAC address), and click "Go".

5. Select the frequency band (channel 1 or 6 or 11), select the authentication type and confidentiality type, and set the shared password (that is, the password for connecting to WiFi).

6. "Enable" the DHCP server, starting in the address pool and ending in. The range can be filled in according to your own situation, and the numbers 2 to 255 can be used.