In the end, it is a question of spraying real stone paint and tiling

Look at the height of the floor, if it is more than three floors, it is better to spray real stone paint is safer, and after a long time, the disadvantages of tiling will come out. The service life of a building has decades, but there will be an aging day, and the service life of the tiles is not long, it will fall off in a few years, and it is very dangerous to fall from a high altitude and hit people. Now many communities are using real stone paint to decorate the exterior wall, Chenguang real stone paint is made of pure acrylic silicon acrylic emulsion elastic emulsion, water-based environmental protection, green and pollution-free.

So don't hesitate to tile or spray paint.

Kiss! Hello, happy to answer your <>

It is theoretically possible to spray real stone paint on the pro-tile, but it must not be sprayed directly. Real stone paint is a kind of exterior wall paint, which is made of stone powder or stone sand mixed emulsion, the texture effect imitates natural stone, and the weight is light, only 10 20 parts of natural stone, and it is a good alternative decorative material in the building with higher requirements for load. According to the requirements of the construction process, the paint needs to be treated as a substrate, and the same is true for real stone paint, so that the surface of the base layer is smooth and clean, with good strength, which is to ensure the firmness of the coating, so the vast majority of it is done on the structural wall.

Spray real stone paint on the tiles, I think only the renovation project has the possibility of matching the bird, if the new project first pastes the tiles of Yu Suiming and then sprays the real stone paint, the cost is more, the construction period is long, the hidden dangers have increased, none of them are good, I am afraid that there is no such Party A. It is best to remove the tiles for renovation projects, and it is not guaranteed that all tiles are firmly pasted. It really can't be all removed, then you also need to remove the loose or hollow tiles and paste them again, and then do brushing treatment on the surface of the tiles, scrape putty and spray primer after cleaning, and choose the emulsion of the middle layer of real stone paint as much as possible with strong adhesion, and the stone and sand gradation must be matched well to avoid precipitation, and choose experienced workers during construction, and finally do a good job of protecting the finished product within 72 hours.

Hope mine can help you <>

Do you have any other questions? 1

Summary. The building after the decoration of real stone paint has a natural and real natural color, giving people an elegant, harmonious and solemn beauty, which is suitable for the indoor and outdoor decoration of various buildings. Especially on the curved buildings, it is vivid and realistic, and there is a return to nature effect.

Real stone paint has fireproof, waterproof, acid and alkali resistance, and pollution resistance. Non-toxic, odorless, strong adhesion, never fade and other characteristics, can effectively prevent the external harsh environment from eroding the building, prolong the life of the building, because the real stone paint has good adhesion and freeze-thaw resistance, so it is suitable for use in cold areas.

OK. The tile can be made of real stone paint, which is a kind of paint with a decorative effect similar to marble and granite. The main branches are made of natural stone powder of various colors, which should be used for the imitation stone effect of the exterior wall of the building, so it is also called liquid stone.

The building after the decoration of real stone paint has a natural and real natural color, giving people an elegant, harmonious and solemn beauty, which is suitable for the indoor and outdoor decoration of various buildings. Especially on the curved buildings, it is vivid and realistic, and there is a return to nature effect. Real stone paint has fireproof, waterproof, acid and alkali resistance, and pollution resistance.

Non-toxic, tasteless, strong adhesion, never fade and other characteristics, can effectively prevent the external harsh environment from eroding the building, prolong the life of the building cracks, Liang Yuanhong because the real stone paint has good adhesion and freeze-thaw resistance, so it is suitable for use in cold areas.

Kiss Glad to answer for you: Can real stone paint be sprayed directly on the brick wall Answer: Kiss Yes, but make sure that the cement wall is flat, smooth and clean.

If the cement wall is very rough, it is not suitable for direct spraying, otherwise it will affect the overall aesthetics, and the paint sprayed out is also uneven, and the wall paint is easy to fall off, and there are problems such as hollowing. The reason why real stone paint can be sprayed directly on the cement wall is because the adhesion of real cave imitation stone paint is higher than that of latex paint, and the construction limitation is small, and it can also form a film at low temperature to avoid the problem of too soft coating. Of course, before construction, it is necessary to sprinkle water on the cement wall for maintenance, which can avoid the influence of alkali in the cement wall on the real stone paint, and the real stone paint used should be selected with high alkali resistance before it can be used directly.

Is it better to tile the exterior wall or spray real stone paint? Of course, this is something that most homeowners will consider. Exterior wall tiles are sheet ceramic products inlaid into the exterior walls of buildings.

They are made from clay of better quality and higher refractory soil that is pressed and roasted. In order to combine well with the basic wall covering, the back of the tile is ribbed. Exterior wall tile features:

exterior wall tile appearance. The exterior wall tiles have a glossy or matte surface and a smooth, flat or rough surface, which give the floor tiles a different texture. The texture of the exterior wall tiles.

The exterior wall tiles are durable, durable, good in texture, bright in color, rich in decorative effects, and have the characteristics of easy cleaning, fire prevention, wear resistance, and corrosion resistance.

Especially in areas with relatively large environmental pollution and dusty air, it undoubtedly has great advantages. What is real stone paint? What are the characteristics of real stone paint?

Real stone paint is a kind of imitation stone paint, and its decorative effect is similar to granite. It is mainly made of natural stone powder of various colors, high-quality emulsion and strong additives, which is used for the imitation stone effect of building exterior walls, so it is also known as liquid stone. Real stone paint has natural colors and colors, natural stone texture, can provide a variety of three-dimensional shape pattern structure, can visually highlight the elegant and solemn beauty of the whole building.

High degree of imitation stone. The effect of real stone paint imitation granite can be as high as 90%, which can fully meet the owner's requirements for imitation stone. Easy to mold.

Real stone paint has the characteristics of rich color system, arbitrary shape, image, modeling, and diverse colors, which can not only be sprayed on complex modeling planes, but also meet the requirements of surface decoration. Dirt-resistant and good cleaning performance. Stone paint has low water absorption, large surface tension, obvious water repellency, not easy to vacuum, not easy to pollute, such as ink can be washed with water.

And the surface finish is not easy to stain, and the cleaning performance is good.

Keep the color good. Natural stone powder is used, no artificial coloring, no fading in the sun and rain, and no yellow or white for long-term use. Lightweight materials.

The weight is very light, only 1 30 times that of marble stone, and even if it falls off accidentally, there is no need to worry about hurting people. Exterior wall tiles can be used for multi-storey buildings or low-rise buildings, high-rise buildings and individual urban areas have banned the use of tile veneer, which is difficult to form in more complex curved buildings; Real stone paint is suitable for all kinds of industrial and civil buildings, multi-storey and high-rise buildings, and complex curved buildings.

I think it's better to stick marble tiles, because it can better protect our walls, and the aesthetics are stronger, ** is not very expensive, and spraying real stone paint is almost the same.

Spray real stone paint well. Spraying real stone paint ** is more expensive, but you get what you pay for, and good quality is also used for a long time, which can avoid trouble in the future.

It is better to spray real stone paint on the exterior wall, because it is not easy to fall off, and there is a particularly cool decorative effect, similar to marble or granite paint, and the decorative effect is particularly good-looking; According to the size of the wall and the amount of use, a barrel is about 500 yuan, if you want to buy a better quality is about 1000 yuan.

1. Real stone paint.

The coating construction is very hard after drying, nails can not be picked, if accidentally sprayed on the tile, you can directly use a shovel blade to remove the residual real stone paint on the glass, pay attention to the moderate strength, it is best to use a hard plastic scraper, so as to avoid the metal shovel to cause damage and leave scratches, if it is a frosted material, a small amount of residue can be used with a dilution solution (such as banana water.

Tian Na Shui) can be completely cleared by erasing.

2. Use a flat shovel to shovel off most of the paint, and then wipe it with a rag to remove it, taking care not to hurt the surface of the tile. You can also make your own tile cleaner, prepare a 500ml bottle of mineral water and pour half of it. Take one cap of soap powder, two caps of vinegar, and three caps of alcohol.

Add half a capful of flour and shake the bottle of mineral water to make it even. When you use it, you only need to spray and wipe it, and it's easy to get it.

The tile should be painted with real stone paint, the surface of the tile should be brushed, and the tile interface agent should be brushed, and then the putty layer should be made, and the primer should be brushed after it is done. This tile is finished with real stone paint sprayed.

Yes, it is highly decorative and has a high-build coating that imitates natural stone, marble and granite. Natural color, with the texture of natural stone, a variety of lattice design;

It can provide a variety of three-dimensional shape pattern structure, can visually highlight the elegance and solemn beauty of the whole building, is the best substitute for exterior wall dry-hung stone, can be used for cement brick wall, foam, gypsum, aluminum plate, glass and other substrates, and can be painted with the shape of the building.

The coating of real stone paint is very hard after drying, and the nails can not be picked, and the general real stone paint can still be picked with the nails after three days of construction under good weather conditions, it should be regarded as the coating is too soft, the main reason is that the choice of emulsion is not appropriate.

It is completely possible, when the old city on both sides of the main road in Chongqing is renovated, most of the real stone paint is made on the tile, first use the special putty for the tile to level, and then make the real stone paint, the effect is quite good.

Answer: The exterior wall tiles cannot be sprayed directly with real stone paint, for two reasons: the first is that the tiles have joints, which are uneven and uneven, and spraying real stone paint will affect the visual effect because of the uneven base layer. The second is that the surface of the tile is smooth, and the bond between the real stone paint and the tile is not firm, and there will definitely be a hidden danger of falling off in the future.

The tile wall can be sprayed with interface agent first, then batch exterior wall putty, and then sprayed with real stone paint, so that the real stone paint will not fall off, and it will not affect the visual effect because of unevenness.

The above is the answer to this question.

It is also necessary to knock out all the tiles with small holes, so that there can be adhesion, and you need to make a pit a little bigger, because the surface of the tiles is too smooth. Hehe......

Strictly speaking, no, there is a special paint that can be directly brushed on it, but it is not very economical to do interface treatment!