How to turn the phone on ?????????

Ways to format your phone.

To emphasize, don't format your phone as a last resort!

Note: Formatting your phone is risky, please fully charge it first!!

Method. 1. Instructions to format the phone:

The phone is reset hard and soft (after the phone is checked, the phone will restore all the settings when the phone was first purchased);

Soft reset of mobile phone (save ** number, information, incoming and outgoing call numbers, etc.) after the grid);

3. Turn off the machine and press * to add the power on button, and start the grid without any prompt.

Method 2: Press and hold the dial key, "* key, and 3" button at the same time, turn on the power until the word "nokia" appears (you can't release any of the keys during this process), and wait a few seconds until "formatting...... appearsFormat the ......”

It depends on what kind of phone you have, hehe.

Let's try to restore the appearance settings first.

It is the memory or memory card that comes with the "grid" phone, and there should be a formatting option above the options.

It's really not good, you can reverse the factory from the mobile phone system, but it seems to cost money.

It's about the same as a grid computer. It's just a cell phone.

In fact, it doesn't work at all In fact, the most direct way is to flash the mobile phone It's quite the same as the computer redo system You can go to the mobile phone repair point to flash the phone ** at 50 yuan left. Right.

Nokia series of smartphone lattice machine method.

1. Soft grid. Enter * on the phone and then ask to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it is completed, and the time to re-enter the phone after the grid is finished;

2. Hard grid. For the S603 version: turn off the computer first, press and hold the "green dial key" and "* key" 3" key + "power on button" while turning on the machine, until a line of progress bar appears at the top of the machine screen to let go, and then reset the time.

For the S605 version: turn off the computer first, press and hold the "green dial key", "red hang-up button", "camera button" key + "power on button" while turning on the machine, until a line of progress bar appears at the top of the machine screen, you can let go, and then reset the time. N97 and 97mini lattice machine methods:

Turn on the keyboard and press and hold the "SHIF key in the lower left corner", "Delete key" in the upper right corner, and "Space key in the lower right corner" at the same time before turning it on.

Some S605 phones do not have a camera button such as "C5-03": turn off first, then press and hold the volume button + screen lock key + dial key (green key) + menu key, and finally press the hang button (red key) to power on!

3. Through the software grid.

Install the system tools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damaged to the hardware of the machine, not to use the hard grid, do not use the hard grid when the machine cannot be turned on.

This paragraph of the Samsung series of smartphones grid machine method.

1. Soft grid. Enter * on the mobile phone and then ask to enter the lock code, the initial password is: 00000000, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then display the Samsung boot screen, 3 5 minutes after the grid is completed, reset the mobile phone time;

Grid machine**:*2767*3855

2. Hard grid. In the shutdown state, press and hold the "0" key, "8" key, "green dial key" + "power on button" until the Samsung boot screen appears at the top of the machine screen, you can let go, the grid is completed, and the time is set again.

Note: Do not use the Nokia grid method on Samsung smartphones, this method is Samsung phone flash mode!

Phone formatting.

It's a factory reset.

It is divided into soft and hard grids.

Soft: Enter on your phone.

After that, you are asked to enter the lock code, the initial password is: 12345 (Samsung smartphones usually default lock code is 000000 or 00000000), if you have changed the mobile phone password only rent code, the dry group is the changed password (not the SIM card password), and then a white screen appears to indicate defeat, only the word nokia is displayed, 2 3 minutes after the grid is completed, re-enter the time;

Hard grid: Turn off the computer first, and then press and hold the dial key, "* key, "3" key when turning on the computer, and turn on the power until the word "nokia" appears (you can't release any of the keys during this process). Wait a few seconds until "formatting...... appearswords, then you can release the above buttons.

After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

a.Phone formatting.

It is a factory reset.

Phone hardware and software reset: In standby mode, input.

Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, the default is Posture.

After entering, select Confirm. (Samsung smartphones usually default lock code 000000 or 00000000).

b.* 7780—soft reset of mobile phone (save the electric trace Zen guess number, information, incoming and outgoing call numbers, etc.) after the grid).

c.For special situations, if the phone cannot be turned on: turn off the phone first, and then press and hold the "green dial key" +".

Power on button" until a progress bar appears at the top of the machine screen and you can let go! It belongs to the hard reset of the mobile phone (after the grid phone, the mobile phone will restore all the settings when the phone was first purchased,).

Attention to the lattice machine: 1Turn off the machine and press the power button, and start the grid without any prompt.

2.When formatting, it is necessary to have sufficient power to ensure that it is sufficient to maintain the operation required.

Grid Tips:

3.The part of the software that is installed on the MMC card will be affected, which is related to whether the program you installed has important files in C. In addition, all the shortcuts of the program installed on the e-drive will all run to the root directory.

Since the anti-installation file no longer exists, you must go to the installation directory to delete the program directly.

In the hard-grid power-off state, press the dial * 3 power on button.

After booting up, the spine is displayed blindly, and the draft is selected to indicate that the grid machine is successful.

The soft grid press 7370 to display to end all connections and calls.

The key will be restarted, and the mobile phone will be successful.

The general grid machine is resistant to the last item in the mobile phone settings! Also called factory reset! But not by all means! Don't qualify, because Xinchang Hongxi will disappear! The most noisy is to back up in advance!

Flash your phone to go to the mobile phone store!! If you are hard, check the model you want from above!! There is no uniform lattice method.

It seems to be restored to the original factory settings.

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password of the general Nokia mobile phone is: 12345, if you have changed the mobile phone password, then you should enter your changed password (note, here is not the SIM card password but the mobile phone password).

After entering the password, a white screen will appear, only the word nokia will be displayed, and the grid machine can be completed after 3 or 5 minutes, and the mobile phone time needs to be re-entered after the grid is completed.

2. Hard grid: turn off the computer first, and press and hold the "dial key, "* key" and "3" key while restarting the machine until there is one on the screen.

nokia", you can't release any of the keys during this process, wait a few seconds until "formatting...... appearswords, then you can release the button slowly. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and then re-enter the phone time.

3. Grid the machine through software

You can install "system."

tools", which has the option of "formatting", you can grid the machine without entering the lock code.

There are a few points to note about the above grid machine:

1. Be sure to keep the mobile phone absolutely sufficient, so it is best to fully charge it before the grid;

2. Do not try to shut down the machine during the process;

3. The charger can not be plugged in during the process, and if it is violated, it may cause serious consequences such as burn-in.

In addition, the hard grid may damage the hardware of the machine, so if it is not absolutely necessary, do not use the hard grid.

1.Soft grid. Through the soft grid, you can restore all the settings of the phone to the default state, and keep the app, text messages and other malmodel content in the phone.

How to operate: It's very simple, enter "*" on your phone, and then a confirmation window will pop up, click to confirm and then format it, and restart your phone when you're done.

2.Hard-gridded. All personal data in the phone can be erased through hard grids, and only one operating system can be retained. Compared with the soft grid, the hard grid cleans up more thoroughly, but the risk is greater than that of Renkai, which will erase all personal data and may also damage the structure of the system folder.

How to do it: In the power-off state, press the power on button, and press and hold the dial key, the * key, and the number key 3 at the same time until the screen shows "formatting......(formatting)", and let go. 3 5 minutes to complete the formatting operation.

3.Soft and hard grid.

Through the soft and hard grid, all the settings of the mobile phone can be restored to the default state, and personal data such as C drive applications and text messages will be deleted. Although the hard and soft operation will delete the personal data in the C drive, it will not affect the files and applications in the E drive (memory card).

How to do it: Enter "*" on your phone, and then a confirmation window will pop up (Figure 5), after confirmation, you will be asked to enter the initial password of your phone (usually 12345, and the small i is 8 zeros). After typing, the phone will appear with a white screen, and the formatting operation will be completed in 3-5 minutes, and then it will restart.

The phone is turned on at the same time as ......Press and hold the 3rd key and dial key! Wait until the power is turned on and the ...... is done

Comparison of several lattice machine methods and results:

1.Enter * on standby – soft bar. Only restore the system to factory settings, do not delete files, the effect is not obvious.

2.Standby input* – soft and hard. Restoring the system to factory settings will delete the personal data of the C drive.

However, Line 2 cannot be retained, and it will return to its original state. Sometimes, the C drive file is not deleted with the grid after the machine, and the system is unstable.

Key hard grid – hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.

Hard Grid Operation Method:

It requires the cooperation of two hands and one hand to manage.

Press and hold the , and the green call button, and only the power button with the other hand. You can't let go until the handshake screen appears.

formatting...

It can be loosened, and after about two minutes, the phone will automatically turn on and it will be done. (6681 6680 6630 n70 n72 will not appear.)

formatting...

words, you can only let go when you see the setting time);

3+1 key hard grid - hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.

3+1 key hardbox method:

1. It's better to pull out the MMC card.

2. Operation method: (Note: need to be in the shutdown state) need to cooperate with two hands, one hand tube hold, and the green call button (3 keys should be pressed tightly, and never let go), the other hand only the power button.

At this point, the 3 keys still can't be let go until the screen appears formatting....It can be loosened, and after about two minutes, the phone will automatically turn on and it will be done.

What should be done as soon as possible after the hard grid is completed: 0, restore the Chinese interface. Of course, this is only necessary for the European version or other water machines with a Chinese interface to complete this step:

After the machine, it becomes an English interface, no need to be nervous, find the icon of the wrench Settings > phone > general > phone language > Chinese Simplified, press yes to restart the phone and it will become Chinese. In addition, in order to enter Chinese, you also need to set up: Settings Phone Settings General Language Chinese Simplified.

1. Restore the business card holder. It seems that I can't type ** without the business card holder, so much so that the brain can't remember a few ......Also, prepare for the next task that needs to be completed as soon as possible. The method is very simple, or use that card holder backup software - business card holder backup, because this software has been modified to the green version by me, it is still used normally after the grid, therefore, there is no need to install it again.

It will still appear in the menu after lattice, and it will be OK to resume after running