Android set top box can t connect to the computer how to root

Connect the phone to the computer with a data cable,Install the flashing tool,After the driver is automatically recognized,Select root to crack or get root,After about 2 minutes,Restart,Prompt successfully ,,, install superuser's apk,You can go to 360 mobile phone assistant**Installation,,, you can assign permissions,,, as for flashing tools, you can use bell pepper,Brush elf,Zhuo master,One-click root,360 and so on,

1. After the set-top box is successfully rooted, you can uninstall the software that we don't need pre-installed in the set-top box, and close some non-essential set-top box boot programs (including system and self-installation).

2. After the set-top box is successfully rooted, it can clean up the junk and cache files generated by the operation of the set-top box with the corresponding system cleaning software.

3. After the above operations, the running speed of the set-top box will be greatly improved.

4. Different root software supports different hardware, you can try several root software.

One-click root operation is simple, safe and risk-free, and you can easily obtain the highest permissions. The safest and best to use the right root tool for Android phone.

If you can't line brush. You can install root software in the set-top box to achieve root, directly search for one-click root in the software market, and follow the operation instructions, there are many similar products you can try. Root is at risk of losing the warranty!

The network set-top box is to extract the TV part of the network signal and provide it to the TV. As long as there is an Internet, a network set-top box, and a TV, you can watch TV. Whether there is a computer or not is not a problem.

You can adjust the lower resolution, and you can also choose to take a look at the PAL format.

The second is that if there are multiple HDMI interfaces, use the TV remote control to adjust the use of the interface.

The set-top box is connected to the computer as follows:

1. Prepare an HDMI cable, insert one end into the HDMI output interface of the set-top box, and the other end into the HDMI input interface of the monitor.

2. Open the network set-top box and monitor, and the monitor will display the picture of the network set-top box.

3. Next, use the remote control of the roof booth box to operate, find the system settings, and press the confirm button to enter.

4. After entering, find the wireless network settings and press the confirm button to enter.

5. After entering, open the wireless network connection, search for the nearby wifi signal, find the wifi signal sent by the router at home, click connect, and enter the wifi password to establish the connection.

Please enter a keyword.

How to connect the network set-top box to the computer.

2020-10-10 Comprehensive Encyclopedia by:admin set-top box to connect to the computer method is as follows:

1. Prepare an HDMI cable, insert one end into the HDMI output interface of the set-top box, and the other end into the HDMI input interface of the monitor.

2. Open the network set-top box and monitor, and the monitor will display the picture of the network set-top box.

3. Next, use the remote control of the set-top box to operate, find the system settings, and press the confirm button to enter;

4. After entering, find the wireless network settings and press the confirm button to enter;

5. After entering, open the wireless network connection, search for the nearby wifi signal, find the wifi signal sent by the router at home, click connect, and enter the wifi password to establish the connection.