Excuse me, there is a place in the oak basin that is prone to mold, why? How to deal with it?

There is a place in the oak basin that is prone to mold, and that is because it must be this place that is rotten, and then there are a little signs of decay, so it is easy to grow mold, in this case, you must dry that place a little, and try not to get some constant things of water underneath.

If there is a place with mold in the oak pot, it means that the place is relatively damp, and there is bacteria in that place after a long time, which can be properly cleaned up, and some anti-bacterial things can be applied after cleaning, so that it will not be easy to grow mold.

Hello friends, it is easy to grow mildew because it is too humid, it is recommended to take it to a ventilated place.

If this thing is already moldy, you need to clean it, then brush it, and clean it again.

The project basin is generally treated with anti-mildew, if the place is prone to mildew. It means that the paint is not well brushed and repainted.

The bottom of the tub is very prone to mold, if you want to keep it from mold, it is recommended that you dry it after use.

This should be locally floppy.

Absorbs water easily. It does not dry easily.

It is easy to grow mold.

Project basins are prone to mold because they are always wet at the earliest. Because the lion place is prone to mold.

Hello, because it is easy to grow mildew when it is damp, and you have to take it to a ventilated place or a relatively dry place, it is not so easy to rise and disappear.

If you're unlucky, brush that area with a brush and dry it with a hair dryer, and you'll be fine with oil on the bottom.

The oak pot is easy to grow mold in one place, so the main thing is to clean this pot frequently and dry it in the sun. If you do more sun, you won't get moldy.

You can re-brush tung oil, or anticorrosive paint can also be!

There is a place at the bottom of the pelvic floor of the project that is prone to mold, which is easy to grow mold when there is often water.

The bottom, because of the heavy moisture, does not dry for many years. Ventilate frequently and keep dry.

Generally, it is easy to get moldy when it is damp, and it is good to dry it.

So why is it easy to grow mold in one place? How to deal with it? It is the item friend that. Is there a place for stoppers?

It's been in a damp place, so he's looking for something he can't do, so you need to brush it clean and put it on the balcony to dry.

In the past, due to the peculiarities of rubber trees, the harvested rubber wood quickly became discolored, moldy and rotten. However, with the progress of furniture making technology, the rubberwood used to make furniture has solved the above problems, and effectively retains and highlights the excellent characteristics of rubberwood.

Spray a brush or sponge with an anti-mold cleaner to thoroughly clean the mold and ash on the wooden frame. As long as there is mold, wipe it clean and let it dry in the natural environment;

Spray with a spray gun, the pressure of the spray gun is adjusted on the left and right, considering that the wood has become moldy, the dose should be increased, pay attention to the control of dead ends, be sure to spray all, as long as all sprayed, even if it is wet, the rubber wood is not easy to grow mold.

This needs to be replaced, mainly because the antiseptic must be done well so that it will not become moldy.

Hello, if the moldy area is not large, it is recommended to sandpaper sanding, and then repaint. Hope, thank you.