TT GUNPLA, this is the GUNPLA?

TT didn't have many new Gundam last year.,Just two Grim Reaper and Shazabi.,Kshatriya.,And Manatee Change.,The quality is average.,It's not good compared to B Society.,It's much better than ghd.,Mainly now out of a vest Taipan.,There are red heretics and cancers.,As always, meat.。 Because there is no competition from manufacturers, the price of the machine has risen very happily recently, and the cost performance is getting lower and lower. If you buy domestic Grim Reaper and cancer, you can consider the new manufacturers, the price is a little more expensive than Gao Gao (relatively Gao Gao other MG cheap, because both manufacturers have the same model, so in the first battle, so it is half price sales) The quality is much higher than the Gao Gao model, whether in terms of combination or details, it is almost the quality of MC, and it is already a factory with the quality closest to B on the domestic model, the disadvantage is that there is no villain, the specific reason is unknown, the mold of the factory is to directly ignore the driver villain, so the Internet is laughing at drones.

TT MG??? The Reaper Gundam hasn't been spelled.,I'm sorry I've only bought the Assault Freedom Deluxe Edition.,I feel like it's the most similar to the Bandai Force.,Bandai Force.。

TT's Xin'an Chau is good. There are currently two versions of the Death Gundam TT, one is the Grim Reaper and the other is the Hell Grim Reaper.

There are many, there are two kinds of Grim Reaper, one is the Hell Grim Reaper, 45 pieces, and the other Ka version of the Grim Reaper is 20 pieces.

This has nothing to do with age, it mainly depends on personal hobbies, maybe your father can't understand it. I worked on my own, and I bought a genuine PG and was told for a long time. Just say it, and I won't throw it at you.

If you are afraid that it will not be good to send it to your home, you can send it to your classmates' homes and tell your classmates that you are okay.

You have to communicate more with your parents, 15-year-old playing with models is not a normal problem but a hobby problem, some parents just have this kind of toy = the concept of children playing with things. As for how to convince your parents, it's up to you.

15 is normal to play. My brother is 21 years old, and he went out after putting together the PG for the first time. When I came back, I found that the PG model had been broken.

I had a big fight with my girlfriend about this. Let me tell you, this thing is training patience, and it's harder than mother's embroidery. If he still says LJ, he'll buy a GUNPLA next time.

Just pay attention. Buy those boxes with the note "Over 15 years old".

They empathize with the profundity.

exia can angel gundam, this cost performance is not bad, movable is very good, the first deluxe version has battle damage accessories and plating, about 300 people's coins.

The new Grim Reaper ka version, about 240 yuan, is movable and OK, and is cost-effective.

Flying wing zero type change (referred to as hair loss), about 220 yuan, can be said to be one of the most popular up to, this mg is very good, cost-effective.

The flying wings are up to about 250, and the wings can be transformed into airplanes, which is cost-effective.

Unicorn impression version MG, handsome is handsome, and can change shape, but the movement of the legs is bleak, it seems to be only 90 degrees, about 300+

The pirates are fully armed, ** very much, and very gorgeous, absolutely good, less than 300, seems to sell for 275 yuan.

RX-78-2One Year War TV Color Version,As the ancestor of Gundam,**It's also good,Compared with several other RX78, it is more outstanding in shape and color,200Yuan or so,Very cost-effective。

The G series, Shining Gundam, God Gundam, Master Gundam, and Static Gundam are all popular products with the highest cost performance, and the mobility has reached the peak of MG! And ** is generally about 150 yuan, or even lower.

Since there is MK2, of course, you can't miss Z, the recommended version of the Zeta Gundam, the HD color scheme is not enough to go online, it seems that it is about a little more than 300.

The SEED system recommends the free Gundam (non-electroplating color matching), the classic machine of the base god, the big super pull wind, movable and high, ** is also about 240 yuan cheaper.

Assault Gundam, it is recommended to buy a white cat, assault e, **more, backpack cow fork, about 275 yuan.

The price of several models of Seed Destiny is relatively high, but the normal version is still good, and it is recommended to strike free, fate, pulse, black strike, and infinite justice.

Some old mg can not be bought for the time being, waiting for B to turn over.

Give points, thank you.

Under the preference for UC system, feel Sazabi, EX-S, Sinanju.

These are more handsome, and the mobility is OK, I hope it will help you.

Up to 00 energy angels, the protagonist machine, the mobility is very good.

TV's German Angel is also 1 100.,You can take off your armor.,Play with artifacts.。。。 When I first finished it, I would change the shape of it every day, which was very handsome

Flying wing zero with wings The bracket is very good to hold up, and it comes with a bracket. There is also infinite justice, unicorn, and destiny are all good-looking and fun, and ** are not expensive Recommended

Shazabi,Fazz,Ex-S is highly recommended,Personally, I also like the mass-produced Zagu in Char's counterattack, but it's not called Zagu, it seems to be called Kiraraki, forget it.,Kshatriya in Unicorn,Sin'anju.。

AMX-004 Kabini is a new human-only MS made by Axis. This machine was developed based on the MAN-08 Elmeth of the old Jean Army, and the Sekomuel Psychic System is in charge of the operation of the body control and the Super Attack Terminal Floating Cone Cannon, and as the leader of the new Jean Army, Harman Kahn's special machine, it has been with her from 0087 until she died in the duel with ZZ Gundam in 0089.

Airframe Model: AMX-004 Rating: AS Adaptability:

Universal Move: Floating Appearance: Mobile Suit Z Gundam Head High:

Standard Weight: Full Equipment Weight: Body Material:

Gundam Nim alloy used for movable skeleton Thruster output: Rocket thruster: 30800kg x2, Number of thrusters:

12 Airframe characteristics: maximum propulsion speed, sensor radius of 10,900 meters, Sacomiu system The successor to the Principality of Jean's mobile armor MAN-08 Amy, the AMX-004 Kabini is led by Haman, the leader of the Axis Army. Kahn designed and built it as her special machine.

In addition to the huge AMBAC (Automatic Control of Movement Balance) balance wing on the shoulder, the distinctive features of this aircraft are the dual-purpose beam cannon it carries (which can be used as a beam saber in close combat) and the floating cone cannon that can be said to be feared by all pilots, it can launch ultra-long-range all-round attacks, these are equipped with a beam cannon and thrusters Small long-range ** is powered by the energy cartridge, which needs to be replenished outside the Kabini after a certain amount of time. The NewType pilot's mind is controlled through the Secomiu system, which allows him to attack outside of the enemy's field of vision. As a result, the float cannon turned Carbini into a Reaper-like mech. (so to speak, you were hit and don't know who hit it), stored in the tail of the store of ten.

During the Kaperis War and the First New Jean War, the Carbini was used as a purpose-built aircraft for HARMAN, and its design was used as the basis for the later AMX-004G Carbini production model.

MG white carbinib is about 240 yuan, but the body is relatively old, it may not be easy to sell, you can buy it online

If you want other colors, there are more options, and there is also an electroplating version

This ratio is obviously a true understanding of the soul.

What do you want to ask? Buy model or group model?

Welcome to Guangzhou Yide Road.

This set is very beautiful, and I plan to collect it again after the New Year.

I'm also a newbie, and I haven't been doing it for long, and I know how much you have.

1. You can soak it, dish soap, start soaking before going to bed, and dry it the next morning.

2. The finer the better, I often use art erasers, alcohol, cotton swabs, and toothpicks.

3. Buy No. 1000, No. 1500 sandpaper or No. 2000 sandpaper or simply don't polish it.

4. The sticker is posted according to the prompt, and the water sticker also has specific instructions.

5. The tools are simpler, just buy a set of pen knives for art, and a pair of diagonal pliers, and you can also use oblique nail clippers.

6. Try not to be too hard when assembling, some components are very fragile, such as antennas, and some parts can be used with all-purpose glue if they are not well assembled.

It's okay to soak the pieces of TT. I played Bandai's, and I didn't dare to soak in electroplating. I'm not sure if your pen will fit, but give it a try.

If the hook is broken, it is best to rub it with your fingers, because there is grease and water on your hands. It is best to use pliers for the treatment of the nozzle, and the general sandpaper is coarse sand, which will damage the components. Use tweezers for stickers, pay attention to dustproof.

Finally, I wish you a happy Chinese New Year!

1 can be soaked. 2 First of all, the model should be diagonal pliers, pen knives, sandpaper, seamless glue, air pump spray pens and other professional tools, but not everyone has them (I didn't have the same when I was a student), diagonal pliers are replaced by nail clippers, pen knives are replaced by single-sided knives, hook pens are replaced by the kind of pen you said, hook is broken and wiped with alcohol or zippo oil, the nozzle treatment should not be difficult, sandpaper must be prepared, hardware stores have sold.

3. It's still annoying to want to make a favorite model, so contact us if you have any questions.

1.It is recommended not to soak, although I haven't tried it myself, but in case of tragedy" - "Besides, the effect of soaking can't be fully reflected in TT."

2.It is best to use a special marker pen for outlining, it is easy to erase if you make a mistake, and it is not very expensive.

3.As for sandpaper, just soak ordinary sandpaper in water, soften it and then wipe it gently.

4.There are always tools, scissors or something.

5.Cut carefully when assembling, don't cut it wrong (I cut off the antenna on my head when I cut it for the first time), and pay attention to the order of assembly, some small parts are best packed in a small box to prevent it from being found.

Finally, I wish you a successful assembly!

First of all, let's talk about the bubble parts are to soak off the antioxidants on the parts, so that the model is easier to color, if you don't color, don't bubble, the quality of the domestic model is not good, and it is easy to crack if you soak it again, although the high quality is still said in the past, but the luxury electroplating version is estimated to fade if the electroplated plate is soaked, so if it is not colored, it is not recommended to bubble.

Secondly, the use of a needle pen can completely replace the gundam's special pen, preferably. If the hook is broken, you can wipe it off with zippo oil, and if you don't have it, you can wipe it with alcohol, but it is not good for the model.

Sandpaper, you can go to the hardware store to buy more than 1500 fine sandpaper, the effect is the same.

Character stickers? I don't know, let's tell you about stickers, there are three types of Gundam stickers:

Ordinary stickers: Just put them on......

Transfer sticker: Directly align the pattern with the surface of the model, and then use a toothpick or other thing to scrape the pattern on it until the pattern is completely attached to the model;

Water sticker: Cut out the pattern you need to paste above, then use tweezers to clamp the pattern and soak it in water for about 30 seconds, wait for the pattern to separate from the paper, and then transfer it to the desired position, and finally use the water around the cotton swab to absorb it.

As for the tools, if you want to build a Gundam, a complete set of tools is a must:

Files, pen knives, scissors, model glue, engraving needles, hook knives, these are more professional and more expensive, and can be replaced by these: sandpaper, carving knives, straight nail clippers, 502, compasses.

That's all, making a model is a process from shallow to deep, at first I was reluctant to invest too much money in this thing like you, but when you come into contact with it more and more, you will unconsciously become obsessed with it. Happy Chinese New Year 0

Well, this doesn't seem to be in the Gundam.

If you're not mistaken, it should be inside the armored core 5 (PV or what's in it with its airborne scene.)