What anti rust oil does not react with rubber products

Non-solvent class 2113.

Anti-rust oil. Solvent-based anti-rust oils or anti-rust oils containing solvents are generally caused.

Rubber products. Target.

Swelling. The anti-rust oil is in contact with the plastic, and after a long time, the plastic will swell, the surface will be uneven, and the strength will be reduced.

In terms of anti-rust oil 5261, the faster the solvent volatilizes, the shorter the action time on the rubber, and it is also necessary to add appropriate anti-swelling additives.

Extended Materials. Classification of anti-rust oils.

Thin-layer anti-rust oil: through a variety of different processes of most fastener enterprises for productive application, it has been proved that the fastener products have good anti-rust performance, at the same time, easy to coat, light color, less solvent volatilization, the amount is saved, less than one-third of the 4102 thick layer of anti-rust oil, so the production cost is saved more than two-thirds, the main use is the treatment of fasteners after blackening at room temperature.

Wax film anti-rust oil: adding some oil-soluble wax to solvent-diluted anti-rust oil or ultra-thin layer anti-rust oil can obtain wax-containing anti-rust protection 1653 film, which can significantly improve the salt spray resistance and atmospheric resistance of the oil film. However, wax is solid or semi-solid at room temperature, which is easy to precipitate in oil, which affects the appearance and quality of oil, and even makes it difficult to obtain the ideal anti-rust effect.

Volatile anti-rust oil: It is an environmentally friendly solvent oil and anti-rust oil mixed with an inner agent, the main advantage is that most of the oil film is volatilized, not greasy, not sticky, will not pollute the product, is a better product on the market, the disadvantage is that the anti-rust time is not very long, about six months to one year.

Resources. Encyclopedia - anti-rust oil.

The hard film antirust oil is brushed on the rubber, and it will not have a swelling effect on the rubber rubber after drying.

Rigid film antirust oil is an industrial product produced by the compound of various materials such as anti-oxidation and corrosion antirust agent, resin, solvent oil, additives and so on. The hard film anti-rust oil has strong anti-rust treatment ability and long anti-rust treatment time, because the anti-rust film produced has high compressive strength, and the oil film is stable and stable, and it is not easy to eliminate.

Hardcoat oil not only overcomes the flow of anti-rust oil, bonding lime and other serious defects, but also overcomes the problem of anti-rust grease coating and removal. Therefore, BAI is suitable for long-term preservation and anti-rust treatment of the surface layer of various metal fabrications, as well as places that need to be stored and transported in extreme weather environments.

Non-solvent anti-rust oil.

Solvent-based anti-rust oil or anti-rust oil containing solvent will generally cause the swelling of rubber products, and the anti-rust oil will be in contact with the plastic, and the time trail will make the plastic swell, the surface will be uneven, and the strength will be reduced.

In terms of anti-rust oil, the faster the solvent volatilizes, the shorter the action time on the rubber, and it is also necessary to add appropriate anti-swelling additives.

Summary. Therefore, when using anti-rust wax, care should be taken to avoid direct contact with the rubber material, or to protect the rubber material before applying anti-rust wax. In addition, different types of rubber materials are also different in their corrosiveness to anti-rust wax, and a small area test should be carried out before use to determine whether it will have adverse effects on rubber materials.

In short, when using anti-rust wax, care should be taken to protect the rubber material and avoid unnecessary losses.

Kiss, you are noisy before the return, thank you for your consultation, about your questions, for you to answer the following Hello, leakage anti-rust wax is corrosive to rubber. The chemicals contained in anti-rust wax may react chemically with rubber, causing problems such as aging, hardening, and cracking of rubber materials.

Therefore, when using anti-rust wax, care should be taken to avoid direct contact with rubber materials, or to protect the rubber materials before applying anti-rust wax. In addition, different types of rubber materials have different corrosiveness to anti-rust waxes, so a small area test should be carried out before use to determine whether there will be adverse effects on the rubber materials that are transported quietly. In short, when using anti-rust wax, care should be taken to protect the rubber material and avoid unnecessary losses.

Anti-rust wax is corrosive to rubber. The chemicals contained in the anti-rust wax may react chemically with the rubber, resulting in the aging, hardening, cracking and other problems of the rubber material.

Summary. Hello, I'm glad you asked, this will not be, because plastic itself has an anti-corrosion function, so anti-rust oil does not work for him. Yes, he doesn't have this kind of corrosive effect, so it won't be corroded, I hope mine can help you, remember to praise it.

Hello, I am very aware of your problem, so it will not be quiet, because plastic itself has an antiseptic function, so it is said that anti-rust oil is not effective for him. Yes, he doesn't have this kind of corrosive effect, so it won't be corroded, I hope mine can help you, remember to praise it.

It is easy to produce oil spots and corrode onto plastic products.

No, it won't. This is the plastic with anti-rust oil rust.

You can wash it off with something.

It is possible to use kerosene and gasoline.

1. Solvent-based anti-rust oil or anti-rust oil containing solvent will generally cause the swelling of rubber products.

2. If you want to overcome this, you should not only work the anti-rust oil, but also need to pay attention to the use, such as not soaking, only brushing, etc.

3. In terms of anti-rust oil, the faster the solvent volatilizes, the shorter the action time on the rubber, of course, it is necessary to add appropriate additives to inhibit swelling. Some lubricating antirust oils have little effect on the swelling of rubber, but they are not easy to contact for a long time.

In conclusion, the elimination of the substance that caused the swelling will alleviate the adverse effects.

If you have any questions, add q to communicate.

Anti-rust think tank, for you to answer.

Generally, the anti-rust oil is in contact with the rubber, and after a long time, the rubber may have some swelling, which is also a common phenomenon of oil on rubber.

In fact, there is no chemical reaction, just the dissolving effect of oil on rubber.

Then there is the hard film anti-rust oil, brushed on the rubber, it dries quickly, and it will not have a swelling effect on the rubber after drying.

1. Product introduction:

The dry film lubrication method can reduce friction, which is a synthetic multi-purpose long-term dry film lubricant synthesized by advanced technology, which can penetrate and combine to the surface of metal, wood, rubber, plastic, and glass to form a layer of dry ultra-thin film to prevent adhesion and reduce friction loss.

2. Scope of application:

Lifts, pulleys, hinges, tracks, conveyor belts, packaging machinery, etc. 3. Features:

Dry, no dust or dirt sticks.

The ultra-thin protective film has the functions of anti-rust and lubrication.

High temperature resistance to 232 C

With NSF and H2 registration certifications, it can be used in the food industry.