Will the fluorescent paint not be bright with water, and how to make the fluorescent paint brighter

I don't know why you're adding water? Is it because the paint is too thick? Or are you worried about not having enough paint?

If the paint concentration is high, use a special thinner to dilute it, and if you are worried that the amount of paint is not enough, you need to buy it again according to the original brand.

Remember: you can't add water to the paint!

However, if you are using a water-based fluorescent paint, it can be diluted with a moderate amount of water. However, it should not exceed its maximum value, otherwise, the hiding power of fluorescent paint will not meet the standard.

First question.

Optically speaking.

Reflection is the directional reflection of incoming light.

Because of orientation. A small divergence means a small viewing angle.

However, the effect is still stronger than fluorescence at this angle.

Fluorescence is the use of special colors to change the color spectrum that is not visible to the naked eye in everyday light to an approximate visible color (light is also a kind of energy, solar power and so on, you know).

to enhance eye-catching.

For example, common traffic police vests, sanitation clothing, and the like.

Both types of lacquer have their own strengths.

It still depends on the specific needs.

Second question.

Broadly speaking.

Fluorescent paint. Orange is better of your colors.

On the color chart, orange is between yellow and red.

That is, it can convert some of the red and yellow light waves into orange.

It is more eye-catching than several other colors.

Other than that. Commonly used fluorescent colors are listed in order of strikingness.

Fluorescent yellow-green. Fluorescent orange.

Fluorescent red. I hope mine can help you.

1. First of all, you should think about where it is used, if the fluorescent paint is used for wall construction, water is used as a thinner when used, and it can be brushed and sprayed. If you want the fluorescent paint to have the best use effect, then you must ensure the pure whiteness of the painted wall, so that there will be a fluorescent effect, and the higher the whiteness of the bottom layer, the better its fluorescent effect. 2. Fluorescent paint generally uses water as a diluent, and it is required to be uniform during coating construction to keep the thickness of the paint film of fluorescent paint consistent.

Generally, the thickness of the fluorescent paint dry film needs to reach the dust to the millimeter, so as to achieve the lightfastness performance that meets the requirements of use. After the fluorescent paint is dry, cover the surface with a layer of aliphatic polyurethane or fluorocarbon protective varnish to make the dry film thickness reach millimeters, which can improve the light resistance by more than one-third. 3. It is best to put a layer of pure white background on fluorescent paint before construction, so that the effect is the best; Do not mix two different colors of fluorescent paint, so as not to reduce the fluorescent effect; In order to ensure the quality and effect of phosphor paint, it is best to use the supporting special curing agent and thinner for phosphor paint; The ratio of fluorescent paint to hardener for outdoor use is usually 2:

1. It can be sprayed directly indoors, without the use of curing agent, and the effect is better. 4. The most taboo thing in the use of fluorescent paint is to mix with other variegated colors, which will greatly reduce its fluorescent effect. Only excellent quality of fluorescent paint products, coupled with qualified construction quality, can achieve the best light fastness and other application effects.

In addition, the primer used before applying fluorescent paint should be adapted to its properties so as not to affect the painting effect.