Where can I buy glue for sticking shoes What is the best glue to use for sticking shoes

You can buy it on **, you can buy it in a supermarket, or you can buy it in general hardware stores and places that specialize in making shoes and repairing shoes.

Glue for sticky shoes, 201 and 502 glue, can be used. 502 is a fast glue, which has a good effect of stickiness and brittleness, and belongs to hard glue. 201 is soft rubber, suitable for sticking slightly soft items, that is, the plasticity is poor. You can choose one for your own use.

Extended Materials. Steps to stick shoes.

1. Surface decontamination.

Dry or wash your shoes.

2. Gluing process.

After the shoes are dry, apply a layer of glue evenly.

3. Lamination method: choose the best adhesive time, try to align it at one time and quickly complete the lamination action.

4. Pressurization: Press and hold the glue with your hand for 8-12 seconds.

5. You're done.

It is generally available in supermarkets, as long as it is available.

Glue is an intermediate connecting two materials, mostly appearing as an aqueous agent, belonging to the fine chemical category, with a wide variety, mainly classified by adhesive, physical form, hardening method and adherent material.

Extended information: common instantaneous adhesive (common -1203 cyanoacrylate-ethyl cyanoacrylate strong instantaneous adhesive is a kind of instantaneous adhesive), epoxy resin bonding, anaerobic adhesive, UV glue (ultraviolet light curing), hot melt adhesive, pressure-sensitive adhesive, latex, etc.

Under the conditions of use, glues and sealants should be used in a certain environment, and the working conditions have an important impact on the bonding performance.

1) Stress. When the adherent object is subjected to peeling force and uneven tearing force, the toughness glue can be selected, such as rubber glue, polyurethane glue, etc.; When subjected to uniform tearing force and shear force, rubber with high hardness and strength, such as epoxy glue and acrylic glue, can be selected.

2) Temperature. Different glues have different heat resistance. According to different temperatures, different glues are used.

3) Humidity. Moisture and moisture are detrimental to the stability of the bonding interface and can be said to be harmful and unhelpful.

4) Chemical medium. Chemical medium mainly refers to acid, alkali, salt, solvent, etc., different types of glue, different curing conditions, with different media resistance. Therefore, glue and sealant should be selected according to the medium that the sticky object is in contact with.

5) Outdoor conditions. Under outdoor conditions, glue should be glued with high temperature curing and good atmospheric aging resistance, such as phenolic acetal glue and epoxy nitrile glue; Silicone sealant is used for sealing.

It is best to buy special shoe glue for shoe glue, and resin glue is recommended.

There is a special shoe glue for shoe glue, it is not recommended to use 502, many people buy a 502 glue directly in the supermarket to repair the place where the shoe glue is opened. The 502 will be hard where it sticks, and it will still degum after a short time.

Resin usually refers to an organic polymer that has a softening or melting range after being heated, and has a tendency to flow under the action of external force when softening, and is solid, semi-solid, and sometimes liquid at room temperature. Broadly speaking, any polymer compound that can be used as a raw material for the processing of plastic products is called a resin.

Resin glue is to use the viscous characteristics of the resin itself to make it more viscous through physical or chemical means to meet some industrial requirements to make various types of glue.

Shoe glue opening treatment method:

1. Clean and dry the shoes first, try not to have moisture on the shoes, it is best to stick the shoes on sunny days, and it is not suitable for rainy days to operate.

2. If it is a leather shoe, first polish it with sandpaper, and remove the previous glue first, so that the glue will stick more firmly, and you need to clean the sand on it after sanding.

3. Apply glue to the shoes, pay attention to the glue on both sides of the shoes, and try to be as thin as possible, because the glue is too thick and it is difficult to stick.

4. After applying the resin glue, let the shoes stand for about 10 minutes, and we turn the glued brush upside down, so that the glue can be dried faster.

5. After 10 minutes, use a hair dryer to heat the glue, but pay attention to the temperature, generally only about 60 degrees of heat can be, control the heating distance, one minute heating time is the best.

First, it is best to use resin glue. The adhesive surface is clean and can not have oil stains, hair, and then glue, stand until the glue basically does not stick to your hands, and then heat the adhesive surface, bond, and reliably press, the tighter the press, the better, keep the temperature for a period of time and so on.

Second, the most taboo is to use some 502 glue to stick on, 502 glue is too strong, using 502, or AA super glue, will make the shoe material harder, no flexibility, but more likely to rot.

1.If the leather shoes accidentally scratch off the skin, as long as you clean the leather shoes with a dry rag first, then use a cotton swab to get a little egg white, lightly apply a layer on the broken skin, not too much, and then press it with your hands to let it solidify, brush with a layer of shoe polish after drying, and the shoes will be the same as new.

2.Regular cleaning is the first step in shoe maintenance, it is best to use leather cleaner and nylon brush to clean the surface, as for the inner lining of the shoes, wipe it with a damp cloth, because the salt from sweat will quickly enter the pores of the leather through the inner lining, and destroy the tissue of the leather, so that it will dry out and crack.

3.Regular maintenance of shoes is the only way to prevent them from being damaged by foreign objects, not to mention that it can restore the original function of the leather, and it is necessary to apply leather oil at least once a year under normal use.

Resin glue. Shoe resin glue belongs to dry adhesive, must be coated with a layer of glue on both sides, and then wait for the glue to be coated after 5 minutes to keep the two sides apart, let the glue dry naturally, and then use a hair dryer to blow the wind for about 10 seconds to heat, before the two sides can be fitted together. It cannot be laminated while the glue is not dry.

Precautions when sticking shoesBecause the resin glue for shoes is a dry adhesive, it is necessary to provide two large enough areas for the glue, and a smooth and clean fitting surface, so as to facilitate the fitting operation and send back a good effect. If you fail to stick your shoes once, please do not rush to stick them a second time, but analyze the reason for the failure to stick them first, because if the method is not correct, no matter how many times you repeat it, it will be useless. For shoes that have been burned and hardened by hard cyanoacrylates such as 502, in principle, they are scrapped and cannot be repaired; Then use resin soft glue to bond, you can only hold the mentality of a dead horse as a live horse doctor, and the bonding effect is definitely not comparable with the "healthy" material.

Question: What brand do you want to buy?

In 2021, the top ten brands of resin glue are Crab Kingdom, Sanhe Home, Falaline, Fat Fat Dragon, Lewei, Congmao, Xin Lotian Home, Magforce, Kunnai, and Zengmei Consumables. If you are looking for what brand of resin glue is good? Then this list of the top ten brands of resin glue can be used as a reference for you to buy.