How much power does the JAC Refine S4 engine have? What about accelerated range?

In the current car market, if you want to find a model is not very difficult, but 80,000 yuan can buy a standard car networking CVT model is rare, and if you can buy a comparable or even more than three or four hundred thousand yuan of the same level of power joint venture brand SUV, it is even more value-for-money. The Refine S4 engine has a maximum output of 150 hp and a maximum torque of 210 Nm. The same hot-selling car, Volvo XC40 has a maximum horsepower of only 140 horsepower, and BMW X1 has only 136 horsepower, which are all foreign brands in the price range of 10,000 yuan.

The numbers are there, and the comparison doesn't need to be repeated. Compared with the acceleration time of 12-14 seconds of competing models of the same level, the acceleration of 100 kilometers per second reflects the practical ability of Ruifeng S4, and Honor has entered the first echelon of very few domestic brands. Therefore, such a power performance, will it be very difficult to use in daily life, after reading the comparison I made for you, I believe you already have the answer in your heart.

The S4 is a unique four-cylinder engine with a maximum power of 110kW, a maximum torque of 210Nm, and an acceleration of 100 kilometers per second.

The JAC Refine engine is not bad. Here's why:The JAC Refine engine model is HFC4GA1-C.

The power output of the Ruifeng engine is relatively smooth when accelerating in the early stage, and the engine can only feel the explosive force at 2500 rpm, accompanied by the increase in the engine sound, and the feeling of pushing back is not very obvious.

The focus of the JAC Refine engine.

1. The engine gasket should be placed and stored correctly. Before use, it should be stored in the original box completely, and should not be arbitrarily stacked to bend and overlap, let alone hung on a hook.

2. The joint surface of the parts should be smooth and clean. Before installing the new liner, it should be ensured that the joint surface of the part is clean and free of dirt, and at the same time, the surface of the part should be checked for warping, whether there is a convex hull at the connecting screw hole, etc., and it should be corrected if necessary. Only when the joint surface of the part is smooth, clean and free of warping, can the sealing effect of the gasket be played as it should.

The JAC Refine engine is not bad. The Refine engine is made in China and is produced in Beijing. Refine is a new turbocharged direct-injection engine with a maximum power of 174 hp and a maximum torque of 251 Nm from 1500 rpm.

Looking at the parameters, it has surpassed the engines of Haval H6 and BYD S6, and the engine power level of Changan CS75 is almost the same. It is mated to a six-speed manual gearbox.

The focus of the JAC Refine engine.

1. The engine gasket should be placed and stored correctly. It should be stored in its original box before use, and should never be stacked arbitrarily to bend and overlap.

2. The joint surface of the parts should be smooth and clean. Before installing a new liner, ensure that the joint surface of the part is clean and free of dirt, and also check the surface of the part for warping.

1. Ruifeng commercial vehicle is the crystallization of technical cooperation between JAC Automobile Company and Hyundai Motor Company of South Korea, and is produced in China's largest commercial vehicle production base - Ruifeng commercial vehicle production base.

2. Its fashionable and not overly ostentatious exterior streamlined shape, wide and comfortable space, flexible seats, and many features of multi-functional functions such as official business, business, travel, leisure, and urban logistics have quickly won the love of Chinese consumers.

3. Since its listing, it has grown rapidly with an average annual growth rate of more than 80%, winning the favor of successful people including the General Administration of Customs of the People's Republic of China, the Ministry of Chinese People's Liberation Army, major banks, public procuratorates and law departments, multinational companies and other ** organs and successful people, and also won numerous honors for JAC Ruifeng.

4. In addition to winning the 2005 MPV annual sales champion, JAC Ruifeng was also awarded the honorary title of the best official car in 2005 (MPV category) by China's first general evaluation list.

OK.

Entering the car,RuifengS4The interior gives people a delicate、Luxurious feeling,The workmanship materials are very exquisite,The inch suspended large screen has a built-in current popular car networking、Voice assistant,Coupled with the touch central control area,Add a lot of science and technology to the carIn terms of power,Ruifeng S4Equipped with16L naturally aspirated engine and15Turbocharged engine。

Among them, the maximum output of the former is 88W, the latter has a maximum output of 110kW, and the transmission part is equipped with a 6-speed manual and C gearbox with the engine four, according to the evil, the new car is also expected to carry a 12-speed turbocharged engine and a 6-speed dual-clutch transmission in the future.

Disadvantages of the Refine S4:

Among the main types of failures in the Refine S4 (2-12 months), engine failures accounted for 33%, body appearance failures accounted for 17%, functional operation failures accounted for 17%, electronic equipment failures accounted for 17%, and transmission system failures accounted for 17%.

Refine S4 (2-12 months) fault problems are mainly manifested as: front seat audio or entertainment equipment - failure, body appearance rust corrosion, cold and hot start and stop when driving - abnormal engine noise, parking auxiliary equipment - failure, manual automatic transmission - gearbox abnormal noise, engine - battery failure.

JAC Refine series** is reasonable, and the performance is not bad.

Due to the co-line with the well-known JAC Volkswagen in the minds of consumers, the Ruifeng 4S car shows a strong level in technology, which may still be a little behind hundreds of thousands of cars, but it is definitely an advantage compared with models of the same level.

For about 80,000 yuan, you can buy this fully functional SUV, which is great value.

The quality is ok, and the price is worth it.

Compared to cars in the same price range, it is much more.

Within 100,000, the cost performance is still relatively high.

The JAC Refine S4 uses a total of two engines, one is a liter turbocharged engine and the other is a liter naturally aspirated engineThe 5-liter turbocharged engine has a maximum power of 110 kW and a maximum torque of 210 NmThe 6-liter naturally aspirated engine has a maximum power of 88 kW and a maximum torque of 150 Nm.

The following is the relevant information of Ruifeng S4:1、Ruifeng S4 is the first super auxiliary size produced by JAC Motors and JAC Volkswagen,Ruifeng S4 length, width and height are 4410mm、1800mm、1660mm,Wheelbase is the appearance,Ruifeng S4The front face adopts a smooth hexagonal front grille,The interior is added to the dot matrix element,With the polygonal headlight groups on both sides and the radical fog lamp area below,Let the car look young and individual。

The starting price of the power is still right, and the fuel consumption is also relatively good, and it is said that the fuel consumption is very friendly and low. From its quality to its appearance, this car is quite cost-effective, a good means of transportation.

The power of this car is very strong; The fuel consumption of this car is not particularly high, and it is very suitable for the average family to buy.

The new car will be equipped with a turbocharged engine and a naturally aspirated engine, both of which are available on many models, and the overall performance is not bad. Of the two versions, the version is probably the power version of the main thrust brother parade, with a maximum power of 128kW, revs 4850-5500rpm, and torque 251Nm at 1500-4000rpm.

Feng personally believes that the advantages are that the car's exterior design, interior configuration, safety performance, and power are all good, and the cost performance is needless to say. Ruifeng S4The latest design language,Obviously, it has achieved the effect of "plain tones plus some embellishments"。 The actual visual effect of the grille is called "starlight wings", which is very good, and the irregular polygonal headlights also echo well with the grille.

From the side, the colour contrast between the roof and the body creates a good sense of hierarchy, and the optional 18-inch wheels provide a more solid feel to the lower part of the car.

The all-new JAC Refine S4 features a hexagonal mesh design with thick silvery-white chrome plating on both sides of the brand logo, connecting the lamps on both sides. The internal structure of the lamp is quite complex, showing a strong sense of technology. The fog lamp area is designed with a concave LED light source, and there is a small grille under the license plate.

On the whole, the front face has an obvious sense of hierarchy, and the visual width has been significantly improved. The design looks quite beautiful and makes a deeper impression.

Millions of car purchase subsidies.

Summary. Hello, taking the JAC Refine L6 Max as an example, the turbocharged engine of this car has a maximum power of 135kW, a maximum power speed of 5000 rpm, a maximum torque of 290 Nm, and a maximum torque speed of 1800 to 4000 rpm. The engine is equipped with multi-point EFI technology and uses an aluminum alloy cylinder head and cast iron block.

Hello, taking the JAC Refine L6 Max as an example, the turbocharged engine of this car has a maximum power of 135kW, a maximum power speed of 5000 rpm, a maximum torque of 290 Nm, and a maximum torque speed of 1800 to 4000 rpm. The engine is equipped with multi-point EFI technology and uses an aluminum alloy cylinder head and cast iron block.

Excuse me, Master! Is this the same way that I have a zero payment?

10 models, this is naturally aspirated, the engine-related parameters are as follows: displacement (ml) 2000 maximum power (kw) 95 maximum power speed (rpm) 5400 maximum torque (n·m) 170 maximum torque speed (rpm) - maximum horsepower (ps) 129 number of valves per cylinder (pcs) - cylinder arrangement type, number of L-shaped cylinders (pcs) - valve structure.

Excuse me, master, is the engine of the 10 model also like this? What is the model of oil filter and air filter?

Air cleaner model. LX2622 Length: 204 Width:

134 Height: 172 oil filter element model. L3485 Height:

76 Outer Diameter: 80 Thread Diameter: M20 Washer Outer Diameter:

63 Washer Inner Diameter: 55

The JAC Refine S3 uses two engines, one is a liter naturally aspirated engine and the other is a liter naturally aspirated engine. JAC Ruifeng S3 is a small SUV owned by JAC, with a wheelbase of 2560mm and a length, width and height of 4345mm, 1765mm and 1640mm respectively.

The JAC Refine S3 is a liter naturally aspirated engine with a maximum torque of 113 hp and 146 Nm. The engine has a maximum power speed of 6,000 rpm and a maximum torque speed of 3,500 to 4,500 rpm. The engine is equipped with VVT technology and multi-point injection technology, and uses an aluminum alloy cylinder head and block.

This engine is mated to a 6-speed manual gearbox.

The liter naturally aspirated engine has a maximum torque of 120 hp and 150 Nm. The engine has a maximum power speed of 6,000 rpm and a maximum torsion torque speed of 4,000 rpm. The engine is equipped with DVVT technology and multi-point injection technology, and uses an aluminum alloy cylinder head and block.

Matching this engine is a CVT gearbox.

The CVT gearbox is a common automatic gearbox with a relatively simple internal structure.

The CVT has only two helical gears and a steel plate chain inside.

The CVT has good smoothness of shifting, reliability and stability.

The front suspension of the JAC Ruifeng S3 adopts a MacPherson independent suspension Congshen, and the rear suspension adopts a torsion beam non-independent suspension.

Millions of car purchase subsidies.