Help AMD AM 2 3800 dual core with a motherboard, the price is cheaper

Motherboards also have good and bad performance. The chipset of the nforce 5 series is mainly 550 570 570u The biggest difference between 550 and 570 is that the 570 chipset supports dual graphics cards, and the other differences are very subtle, but I recommend the 550 chipset, because most players will not use dual graphics cards, and there are many manufacturers who have added some functions of 570 to the 550 motherboard, which improves the cost performance, I recommend you to use Yingtai's nforce550 motherboard, I forgot the model, this product is still quite good. And the Jet Hummer.

The model is Yingtai Tforce550 SE 680 or so, overclocked 1 stream.

Panzheng AF550 Pro T I just matched it very well.

Take a look at the Jabra Hummer HA01GT 590

Jabber has been working for Onda, Rainbow, Shuangmin, Spartac, HA01GT motherboard uses NVIDIA NF550, provides 4 DIMM slots, 2 PCI-E 16X graphics card slots, supports SLI, 4 SATA interfaces support SATA2 specifications, power supply module adopts five-phase power supply circuit design, very strong, closed inductor and solid capacitor, Gigabit network card, 8-channel sound card, very strong motherboard, workmanship materials can only be produced by a large factory like Jet.

No, because the AMD4000+ is an AM2 port and cannot be installed on an AM3 motherboard.

It is the same interface as am2+(940), and am2+(940) is just a specific number of pins added to the back to distinguish them.

It's one of a kind. The difference between AM2 and AM2+ is that the bus width is different, but the CPUs of both can communicate with each other, and it has no effect. AM2+ is the transition of AM2 to AM3.

Ferry interface. The difference between AM2 and AM2+ and AM3 interfaces.

AM3 is AMD's latest connector, and the number of pins in AM3 is different from AM2 and AM2+, with AM3 having 938 pins and the other two having 940 pins. AM3.

It's higher than AM2+, and much higher. The processors on the AM3 interface support DDR3 memory, while the processors on the AM2 and AM2+ interfaces only support DDR2 memory.

The AM3 processor is interoperable with the AM2+ processor. However, on the AM3 interface processor, there will be a loss of performance on the AM2+ motherboard.

2. AM2+ is just an upgrade to the AM2 interface.

AM2's HyperTransport is only the standard, while AM2+'s HyperTransport bus is. ht operating frequency.

is 1GHz, and the maximum data transmission bandwidth is 2GT S i.e. 8Gb S. The HyperTransport bus of the AM2+ processor supports the highest.

at which the data transmission bandwidth will reach .

A new processor interface is usually defined by the type of memory that supports newer updates, such as AM2 because it supports DDR2 motherboards.

Born. However, it can be seen from the specifications of the AM2+ interface that it does not support DDR3, and the future AM3 interface will fully support DDR3So am2+

It can only exist as a transitional interface.

The frequency of the AM2+ processor will affect the HT bus frequency. That is, what we call the transmission bandwidth will reach ie.

It's just the highest value that can be obtained in theory.

All motherboards that do not need to force AM2+ interface, just wait for AM3, and directly support DDR3

3. The difference between the AM2+ and AM3 interfaces is that the AM2+ is also 940 pins, while the AM3 is 938 pins! The two can't be mixed!

Distinction: The easier to see between AM2+ and AM3 is that there are four notches in the pins.

AM2+ has 2 missing needles and 2 needles, and AM3 has three needles missing all four gaps, that is, 2 more needles than 940, so it is 938 feet!

No, 4000+ is a 940-pin AM3 socket with only 938 pins, so it can't be used, the new CPU can be compatible with the old motherboard, but the old U can't get on the new board.

I have an amd

If you want to change a 4000+ CPU to a motherboard, can you get a 785G motherboard?

The key is that most AM3 motherboards only have DDR3 slots, while 4000+ does not support DDR3 memory.

What motherboard does AMD4000+ go with 2009:

There are also many motherboards that can be on 4000+, as long as you find a motherboard that supports AM2, and the refreshed BIOS can also support the AM3 interface CPU, or choose directly.

AMD Phenom II X4 925 2800MHz 512KBX4 6MB DeNEB 45nm C2 95W 4000 The BIOS of the flashing motherboard can support the CPU of AM3, but the performance is at a loss compared to the native AM3 motherboard completely.

SOYO SY-N7HM3-GR motherboard (NF720 socket AM3 AM2+ AM2) supports 2-3 generation memory.

Enough for your u and **cheap. Between 399.

The AM3 interface is not backward compatible.

The AM2's motherboard flashes the BIOS upwards.

Because the AM3 interface has a few fewer pins, you can't plug in the AM2 AM2+ CPU.

Dual-core <>

Three-core swimmer. <>

The more common dual-cores are the x2 7750 and x2 7850;

The more common tri-core is x; Band imitation.

For a list of specific processors, let's look at the picture above. Stupid grinding.

If you don't understand something, please ask, it helps, thank you.