Why does the computer often fail to boot due to Windows root system32 hal dll file missing? 20

Method 1: Type "SFC ScanOnce" directly in Command Prompt mode, check all system files, if needed, Windows will prompt to insert the original installation disc, and then restart the computer, you can solve the problem.

Method 2: This may be caused by corrupting the boot file of Windows XP during the installation of the game software, because the system prompts that the file is missing is a typical manifestation of file loss or corruption. In general, when there is a file corruption situation, Windows XP will automatically try to boot from the C drive, and the above problems may occur.

You can troubleshoot this by using a file. Open the file under C: on another computer with the same installation as this system, and then re-damage the file according to its format.

For the security of the system, it is best to make a copy of each file before modifying it to avoid further losses.

Method 3: Insert the XP installation disk and reboot the computer and select the Fault Recovery Console. Follow the prompts to enter the Windows DOS directory.

At the DOS prompt, enter expand x: i386 c:

Windows System32 (X: is the drive letter of the optical drive. Use expand again to first copy to c:

Windows system32, and restart the computer after renaming, and then copy the source file name because the name is changed (ren) and reboot, (restart) can be!

I'm not here for the sharing.,I'm telling you.,I've also encountered such a problem.,I've checked a lot of information.,Presumably you've installed the system countless times but it's still useless and it will still crash, right? So good, this excludes poisoning! It's definitely a problem with the memory module, you remove it and insert another hole to ensure that the medicine is cured, trust me!

It may be that some software or virus on your computer has changed the contents of the files in your C drive.

It is the registry key that is missing or corrupted.

Hello, the computer boot shows "Unable to boot Windows Root> System32 file" Solution: Insert Windows XP disc "Press any key to boot from cd....Press any of the keys on your keyboard to start the Windows setup process.

The installer will load the files required to install Windows. This process may last a few minutes. Go to the Repair Installation option.

When your installer is loaded for the first time, a welcome message will appear on your computer. At the bottom of the screen, you'll see buttons for several different options. Don't press the fix key, you should press the enter key to continue.

Press the F8 key to agree to the Windows License Agreement. Select your copy of Windows. After you agree to the license agreement, you'll see a list of drives.

One of the files is marked as:"windows"and is highlighted. If you have more than one system installed on your computer, you'll need to manually select the system files. Start the repair.

When you see that your copy is highlighted, press the R key to start the repair process. Windows will start deleting system files. After the files are purged, the installation of a new copy of the system files begins.

The repair process does not delete the user's personal files and set your parameters. During the reinstallation process, you'll need to set up your region and language options, as well as your network settings. Most users can select the first option, "No, this computer is not connected to the network, or this computer is not on the local network" to create your username.

Once the system is reinstalled, you will be asked if you want to sign up for Microsoft. Unlike system activation, this step is optional or unavailable. After that, you'll be prompted to create a username and a username for another user using the PC.

If you want, you can add and remove users later. Update Windows. When you're done setting up, you'll be taken to the Windows XP desktop.

The repair installation restores your Windows to its original state, so any updates, patches, and service upgrades that were previously installed have been removed. You need to update your PC as quickly as possible to prevent it from any dangerous threats. Continue the overhaul.

If the issue you encountered has been fixed, then the fix has already worked. If the previous problem has not been resolved, then you need to do further repair work and perform a comprehensive cleaning and installation, which includes erasing all your hard drive data. You can check out this tutorial to learn how to do a full cleanup and installation.

What should I do if the computer boots up and says "Unable to start Windows Root > System32 file"? Hello dear, it is the core driver of the WinNT kernel (including WinXP) operating system volume, usually caused by the installation of multiple operating systems, if the system can still boot, you can extract the file from the installation disk for recovery, otherwise individual disk partitions may not be usable. If the system fails to boot normally, especially if the system partition uses NTFS, I am afraid that the only way to do this is to reinstall the operating system or use the console to fix the insertion of the XP installation disk and reboot the computer, and select the Failure Recovery Console.

Follow the prompts to enter the winnt directory. At the DOS prompt, enter expandx:

i386 : Windows System32 (X: is the drive letter of the optical drive.

Use expand again to first copy to C: Winindows system32, and restart the computer after renaming, and then restart the source file name because the name is changed (ren), restart can be here, it is recommended that you ask a professional to repair it. I hope mine can help you.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Let's redo the system, the files are lost, and sometimes the restore can't be used.

The system is damaged, it is recommended to reinstall

Generally speaking, when the system is broken enough to appear: system32 error prompt, it is best to reinstall the system.

Say it or not, believe it or not.

Is that a tooltip or something? If so, you click "OK" to see if it works. If it doesn't work properly, then you can reboot into safe mode and copy the same file from your friend's house to file A Enter safe mode

Press F9 when you boot up, press all the way, and then enter according to the prompts.

Reboot to the death and boot up when you come out The computer has a chance to fix itself.