What s going on with the mobile phone always automatically out of numbers, and it always rings with

Hello: This phenomenon on the phone is suspected to be a system problem or a virus, it is recommended to back up important data (do not back up the app to prevent viruses, you can reinstall it later), restore factory settings.

If the flickering temperature of the refrigerator display is caused by the actual temperature in the box not reaching the set temperature, the display temperature will stop flashing when the temperature returns to the normal set temperature. Here's how to fix it:

1.Please avoid putting a large amount of food at one time, as it will cause a sharp increase in calories in the box. It is recommended to place in batches. When placed, do not be too tightly concentrated, try to place it evenly, and reserve sufficient space to facilitate air-conditioning circulation, within 80% is the best.

2.Try to place the food in the middle or on the left side, not against the temperature sensor on the back wall of the refrigerator or the upper right side of the fruit and vegetable basket.

3.Ensure that the doors of each box are tightly closed, and clean the door seals regularly to prevent foreign matter from sticking and affecting the adsorption of the door seals.

4.The refrigerator should be well ventilated, away from heat sources and away from direct sunlight.

5.Please minimize the number of times the door is opened and closed, and the opening time is shortened.

6.Under normal circumstances, if the user meets the above requirements, he only needs to let the machine run stably for a few hours, and do not open the door for a short time. If it still doesn't work, you can turn off the power plug of the refrigerator, turn it back on after 15 minutes, and observe again.

The phone automatically sends text messages, the problem may be related to the software used, it is recommended:

1.If you automatically send SMS messages after opening a certain software, it is recommended to check whether there are calibration settings in the soft and bold software settings, such as calibration flow.

2.Restart your phone and try.

3.Place the SIM card of the mobile phone in another machine, observe whether the same problem will appear, and rule out whether it is related to the SIM card binding business.

If the problem persists, please bring the Iwalunshan purchase invoice, repair card and machine to the Samsung service center for processing.

In the event of mobile phone screen failure, first of all, we need to clean the mobile phone screen, and the static electricity of the mobile phone screen may also cause the touch screen to fail, so you only need to gently wipe the entire screen with your hands. Or you can try to remove the protective film to clean the screen.

After finding that the phone's touch screen is not working, we can also try to press the lock screen button back and forth a few more times. In many cases, the phone's touch screen fails because of a slow response caused by software conflicts or incompatibilities, so it is possible to recover by pressing the lock screen button back and forth a few times.

For more serious cases, you can try by turning off the phone, then waiting for a few minutes before turning it on. Or remove all the memory cards and ** cards of the mobile phone, wait for a few minutes and then install them before trying.

In addition, there is a situation that is encountered by friends who often use beautification, this situation may be caused by the incompatibility of various beautification software and the system, and the solution is also very simple, generally uninstalling beautification software similar to the theme can be solved.

If you can't troubleshoot the problem through the above, you will have to restore it to factory settings. First, use a PC suite to back up the contents on your phone. Before paying attention to the soft grid, take out the memory card first, otherwise it will be formatted together, and the contents of the card will be completely deleted!

If this persists, try flashing your device again.

After flashing, if such a situation still exists, it is a hardware failure, and then you need to find after-sales service, or return to the factory for maintenance.

If the screen is not good, just change the screen.

This situation may be caused by moisture on the internal program circuit board, or the internal sensor is damaged, if a person can stand on it to appear data, the sensor is generally no problem, and it can be taken outside to the sun.

Why is the number of pounds displayed, and how can I turn it back? I'm in a hurry!

If you are worried about mobile phone poisoning, you can use antivirus software to check and kill it, and directly use NetQin mobile phone antivirus software to solve the problem. If a virus is found on your phone, there will be a list of viruses after NetQin Antivirus scanning, in which the "to be repaired" file means that the file is infected with a virus but can be used normally after repair, for the "to be deleted" file, you can try to delete the virus file through the "Delete" option in the options. According to the prompts, in general, the killing process is very simple, if you still can't, you can go to NetQin's official website for help, or directly to NetQin's customer service.

Probably not, the virus in the mobile phone is too difficult, if you are a non-smartphone, the probability of poisoning is basically 0

It is possible that there is something wrong with the hardware of the phone, send it for repair and see, it is best to say what model your phone is.

There is a problem with the number keys of the keyboard, after shutting down, slap the keyboard keys down and then turn on the computer, if it is a laptop, you have to switch the number and letter keys. If it doesn't work, just change the keyboard. Look**It's a problem with the 2 button.

Hit the 2 button firmly. Maybe there's something in the keyboard.

It may be that the keyholder of the key is broken or the keycap is broken, and then it is not installed, it is recommended not to adjust it yourself, you can take it to customer service for repair, generally there is no major damage to replace it - press a keycap and keyholder.

Look at what you mean, it seems that typing on the side will be wrong? Somewhere else won't?

If so, there is something wrong with your screen.

If this part is not good only when typing, and when playing other content, the screen here is fine, then you can uninstall your input and reinstall it.

If the refrigerator shows that it keeps ringing, there must be something wrong, please take a closer look at what the content is, or it is frozen too cold, or it is anti-freezing.

You have to confirm whether the sound is mechanical or ah, the sound of electrical appliances you have to confirm clearly, and whether there is a flashing display when you want to be born or whether there is a situation where the display light is not on, and also determine whether the cause of the Taoist icing is caused by the abnormal sound of the abnormal machine.

It should be a small problem, if the sound is loud, call the after-sales service to take a look, there may be a sound caused by bad line contact. It's hard to fix yourself.