Is it okay not to have a 12V gasoline processor gasoline cabinet?

Of course you can't do this, it's good not to add it, and it's not bad to add it.

OK. If the original factory requires 93, add 93, do not use high-grade gasoline for a long time, because high-grade gasoline will change the ignition time, and long-term use of high-grade gasoline is not only bad for the car, but also shortens the engine life.

12V gasoline plus gasoline grid, this should not be a no, this must be used. If the two can be used together.

No, I suggest you keep adding and don't cancel it at will.

Is it okay not to have a gasoline grid for a 12V gasoline processor? I think it's definitely not okay, he has this thing, it must have its reason, it's all learned through lessons.

Is it okay to use the No. 12 gasoline grid? Yes, totally, there's no problem.

If this is removed, it will have a certain impact on its function, and it is not unavoidable.

12. This should be necessary for the gasoline processor, because it can avoid gasoline leakage, so it should still be necessary to carry out a practical operation.

The second is that gasoline is hydrogenated, is it okay to have a gasoline grid? 12,We should be able to pinch gasoline, but it should be optional, and her gasoline is mainly based on its gasoline plus song can not be not.

It's not okay to have a partition single, if you can too, it's also a thing like this that I use on my mobile phone, and what about later? If I have 12 gasoline in my house, no, I will use 11 gasoline and the next time something is put on me.

This gas has a pinch, the gasoline grid generally has a great effect, it can block the gasoline, so this still has to flow, you can't throw it away, if this is rotten, you have to quickly change it.

Is it okay to have gasoline at home level? I feel like it will definitely affect if you don't.

I think his gasoline is still very reliable, and the quality is excellent.

12V gasoline plus engine oil pavilion is not optional, after all, there is a certain reason for setting it up like that.

Is it okay not to add 12V gasoline to engine oil? No, this must be installed.

Three-volt gasoline plus gasoline grid is not okay.

2. Due to the special use environment of the 12V fuel dispenser, the power of the power supply battery is different, and the other power supply lines of the battery are also different. The starting current of the solenoid valve is relatively large. If there is an automatic reset phenomenon of lifting the gun for refueling, please check whether the 12V or 24V power supply fluctuates greatly at the moment of lifting the gun, and whether the VC1 and PD voltages are lower than the normal value.

4. The filter screen on the machine needs to be cleaned frequently, including the filter screen of the fuel tank and the filter screen of the fuel dispenser. It should be cleaned once a week or after each oil intake for a month, otherwise impurities may clump and clog the filter, resulting in little or no oil output, and even jamming the electronic valve and flow meter.

After lifting the gun, cover the oil inlet of the pump with your hand to verify whether it is caused by the vacuum problem of the pump, the leakage of the pipeline and other problems. When suctioning is felt, it means that there is a pipeline leak or other non-pump failure; When the hand feels that there is no suction, it means that the pump itself is faulty: the oil return plug is stuck and not sealed by foreign matter, the sealing surface of the relief valve core and the stool and the pump body is stuck by foreign matter or the relief valve is stuck, the seals of each sealing surface are crushed, or after the pump is used for a long time, the vacuum degree becomes smaller due to the mutual friction between the gears and the matching gap.

The 12V on-board fuel dispenser is not oiled, you can contact the manufacturer. Fuel dispensers are developed with the development of automobiles and highway transportation. From its birth at the beginning of the 20th century to the present, tankers have roughly gone through 4 stages of development.

The first stage is the manual hand leather training type refueling machine, its principle is similar to the piston working mode of the steam engine, the second stage is the mechanical refueling machine with manual compression, which is characterized by the combination of electric and manual, both can be used to produce oil with oil pump electrically, and the third stage is the electronic refueling machine, which is characterized by the application of computer technology to the purification of the oil machine, and the computer master does the grip plate to control the oil, so that the refueling becomes convenient, fast and accurate, and the fourth stage is the full computer tax control refueling machine, It is characterized by the application of network communication management and IC card and other technologies to the fuel dispenser, so that the fuel dispenser has the functions of network management, convenient payment, value-added services and so on the basis of fuel transportation and measurement.

If the 12V on-board refueling machine does not work normally, first check whether the power supply is electrified, if the power supply is normal, the next step is to check whether the refueling machine motor is a beam pin can run, if the motor can operate normally, then it is the failure of the refueling oil pump, check the refueling oil pump to find out the cause of the failure of the hall. Carry out repairs.

After lifting the gun, cover the oil inlet of the pump with your hand to verify whether it is caused by the pump vacuum problem, pipeline leakage and other problems. When you feel suction, it means that there is a pipeline leak or other non-pump failure; When the hand feels that there is no suction, it means that the pump itself is caused by a fault: the oil return plug is stuck and is not sealed by a foreign matter, the dust attack of the overflow valve core and the sealing surface of the pump body are stuck by a foreign body or the relief valve is stuck, the seals of each sealing surface are crushed, or the pump is not noisy after long-term use, and the vacuum degree becomes smaller due to the mutual friction between the gears and the matching gap.