If you want to equip your child with a drawing board, where is the best place to install it?

To install a sketchpad for your child, you must first install itHeight within reach of the child, height positioning according to the height of the child, height can be determined according to the ergonomic size; Secondly, the artboard should be loaded inAreas where children are constantly activeIt is best to be in a space such as a children's room, which will neither affect the rest in the bedroom nor the aesthetics of the walls of the living room; In the end, it's betterDrawing boards nailed to the wall, and to be lightweight, to ensure the safety of children first.

ErgonomicsMake the sketchpad fit the natural form of the human body to the greatest extent when using, meet the size of the best comfort of the human body, and reduce fatigue without active adaptation, so that the child is more comfortable and safer when using the sketchpad, as shown in the figure, measure the child's body size for the purchase of the sketchpad, which is about 3-5cm higher than the child's elbow (that is, 5-8cm higher than the waist).

It is best to install a drawing board that is directly fixed on the wall, the type of easel is easy to cause danger, and accidentally hitting it may cause injury to the child; In addition, the quality of the drawing board needs to be considered, there are whiteboards on the market, and wooden ones are also better, but to ensure that the corners are four, children often rub with their arms, so it is necessary to ensure that the surface is smooth.

About the space for the drawing board,Children's roomThe most suitable, because it is the child's own space, in the free space the child can play his nature, wanton brush, if there is no children's room, the bedroom can also be used as a second choice, the bedroom can first be guaranteed to be a quiet space, there will be no other sounds or objects to affect the child's thinking divergence; Secondly, bedrooms generally have limited space and less furniture, which can ensure the safety of children.

In short, there are three questions to consider before installing the drawing boardComfort for children to use；IIThe child's own health, which is also safety；IIIIn what space can ensure that the child's thinking is divergent

I think that when you install a drawing board, the back of the drawing board should face the sun, and only then will the front of the drawing board be facing away from the sun, which will make the child more creative.

If you want to install a drawing board for your child, I think it is better to install it in the living room, because the living room is relatively large.

The sketchpad should be placed in a well-lit location, preferably by a window, because not only the light is good, but the scenery is also good, which can give children some inspiration.

It is okay to install a sketchpad for your child in the living room or in his own bedroom, as long as it is convenient for him to use on his own.

There is nothing special to pay attention to in the position of the drawing board, the main thing is that it is more convenient to require, and then there is no pollution on it.

It is more suitable to install it in the living room or the child's living room, because the child will feel more free and it is convenient for the child to draw.

If you want to install a piece for your child, you must put the sketchpad in your own room, which is more suitable for your child's creation.

It can be installed in **, as long as it is convenient. It can be installed in the living room, in the study, or in the bedroom.

Personally, I think it depends on the height of the child and where he frequents, but it would be better to have it in the living room, because there you can be with him.

If you want to install a drawing board for your child, you can install it in the child's bedroom, and there is nothing to pay attention to in the specific location, just choose according to the child's height.

Create your first artboard first, and as long as the page number object is on the artboard and not locked, duplicate the artboard! The number of pages was changed again.

Use the first one to copy only the boxes and page numbers. You can get the next one.,And then replace the page number with the number.。。 The position does not change.

In cases where it is greater than or less than the normal scale, hold down the spacebar and drag with the left mouse button.

By moving the artboard, which one do you mean moving?

Please be patient and read it, the previous paragraph is for Lily. It. Blue. Month said.

TM knows how to learn from others. Don't believe it, what is a god-level problem, it's to learn from others, **I send it to everyone, don't believe this kind of person, why scold the landlord? The person itself is shameless, everyone should not support this kind of villain!!

Here's how!! Li's Blue Moon, you've got me a good look!! What kind of good guy to pretend !!

Landlord, I'm sorry for you first, in fact, I'm also looking for it, I saw a method somewhere else, I don't know if it works.

C drive, documents and settings, administrator, application data, macromedia, flash player, sharedobjects, g93g8e3g (this may be different, I am not the same as this one), localhost

The man said it was inside, and it should be inside, but I couldn't find it. Hope it works for you. t v t.Here are a few pictures for you.

First of all, I said, yes. From. Other. Target. Earth. Square. See. Arrive. I'm not a person like Lizhi Lanyue, who directly pastes other people's to pretend that I have worked hard to type out knowledge. ）)

This children's shoe, let me help you answer! Well. Usually in the case of a large number of brushes.

When you save, you can't save.,Ahhhhh If you can't save it, what should you do?!"You don't have to worry about this kind of problem in the future.

Because we have nice local archives.

First of all. We're going to log out. Next. Let's start archiving again. At this time. You will be prompted to log in. And then we're going to fork it off. Don't log in.

After that, you'll see 8 locations where you can save. This is the legendary local save. Regardless of how many strokes you make.

Don't worry about not being able to archive anymore. The next time you log in, you have to continue drawing, and you will be prompted to log in as you just said. And then we're going to fork it off.

Don't log in, log in after drawing!

But so. I would like to remind the children of the paper. Local archiving.

As the name suggests, it exists on the machine you are using now. Let's say you drew half of it on your home computer today. Then I went to someone else's computer and wanted to continue drawing.

That's impossible.

And one more point. For children who like to clean up the traces of history every day. Be careful. Wait until the painting is finished. Otherwise, the images in the local archive will be cleaned up.

By the way. Archiving can also sometimes run into such issues. It's just that after opening the archive, I found that there were a lot of horizontal bars on the screen.

As long as you log in to yours and click [Save Record] on the right side, the game will be automatically saved, and when you go home and want to continue drawing, you will be logged in, click [Open Record] on the right side, and you can continue to draw. Look

It should be in my document, and the computer was originally stored here.

The graffiti drawing board does not need to be saved locally.,Click on the save record on the right to automatically save it on the server.,Next time, just click to open the record to export what you drew before.,Just continue to create It's good that the graffiti drawing board has a lot of competitions.,Remember to take your painted works to the competition Come on.

It is more convenient for you to use ID to make a picture book.

Adjust the position and size of the logo on a certain artboard, "cut" and then "paste on all artboards".

To do vi manual, you can put ** in AI, and then open InDesign and copy the ** (excluding text and layout) done by AI into the ID. You can do a good job of typography (like logo navigation bar) and later text layout in the ID. Indesign is convenient and much easier to use than CDR, you can try it.

It's a good idea. Years of experience in graphic design, most people don't tell him. Ha ha.

This can be achieved by using a stored template, that is, the common object is stored as an AI template AIT, and the template can be opened directly every time a new file is created.

Make duplicate content into symbols, and each time you modify the symbols, they will be updated synchronously on each artboard.

Ctrl+C what you want to copy, then Ctrl+Shift+Alt+V, no thanks!

Search: [Easy Language] When the artboard is drawing a straight line, move the position of the artboard, why does the picture just drawn disappear?

Hello, you did a graphic design with AI.

The size of the work, what is the size of this work, and the bleeding bit, is the size of the print of the entire work. Let's say you design an A4 size piece on A4 paper.

The size of the room is 210mm and 297mm, and on top of that, the size of the bleeding site is 3mm on the top and bottom and left and right

The AI's bleed is automatically 3 mm by default outside of the position you want to crop (the value can be modified), and then you need to make up the bleed position yourself.

The bleed line is mainly to make the printed picture exceed that line, and then even if there is a slight deviation when cutting, it will not make the printed thing useless. The location outside the bleed line is where it is to be cut.

Bleed is a technical term in the printing industry.

Bleeding in printing refers to the pattern of increasing the external size of the product, adding some extension of the pattern at the cutting position, and specially giving each production process its use within its process tolerance, so as to avoid exposing the white edge or cutting the content of the finished product after cutting.

In the printing industry, the cutting position is not very accurate because the tools used to cut printed matter are mechanical tools. In order to solve the problem of unintended colors on the edge of the printed matter due to inaccurate cutting, the general designer will add 2 4mm reserved positions around the cutting position to "bleed" to ensure the consistency of the finished effect.

First of all, turn on the computer, the system defaults to the start menu interface.

You can't find a paint tool in this interface, so now look for a place and right-click.

At this point, an option will appear at the bottom right with the name "All Apps", click on it.

Once you've got all the apps, you'll find the Paint tool here.