How to solve the problem of memory cannot read and write 70

Memory instructions cannot be read or written, which is a common problem in computer use, memory is a storage component on the motherboard, which is an important part of the CPU to communicate directly with and store the data and commands currently in use. When you type a command with your keyboard or mouse, the CPU interprets the command and loads the instruction or program into memory so that the program can be executed. Once the memory is faulty, the program cannot be executed, hence the warning of the "This memory cannot be read or written" error that we mentioned earlier.

Of course, the failure that "the memory cannot be read or written" is not necessarily a memory problem, but also a bug in the computer that has a virus or Trojan horse and the program itself. It's hard to tell what caused it, and it's hard to rule it out for a while, but it doesn't matter, press OK, cancel, restart, and you can do it. Interested netizens can try to solve the problem with the following methods:

1. The physical memory is too small, and the physical memory is increased; The memory and motherboard are not plugged in properly or other hardware is not compatible, reinsert the memory or change the socket; Dual memory is not compatible, you need to use the same brand of memory or only one memory; Inferior memory module or memory module is broken Replace the memory module; Set up virtual memory appropriately.

2. There are too many open programs, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

3. There are too many programs that run automatically, close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods, general programs can be turned off.

4. Excessive fluctuation of mains voltage, or the use of inferior power supply on the PC, will bring damage to the memory, and replace the power supply with high power and high quality.

5. The PC chassis is full of dust, or the PC working environment is relatively humid, which will also cause abnormal operation. Dust removal in time.

6. CPU and graphics card heat dissipation problems, improve heat dissipation.

7. If there is a problem with the hard disk, scan to repair or replace the hard disk.

8. Driver problem: Reinstall and update the driver.

9. Illegal operation, the system cannot be executed.

10. Software damage and reinstallation of software; The software has bugs, patch or update to the latest version; The software is incompatible with the system: patch the software or try the compatibility mode of the system; There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

11. There is a problem with the system itself Sometimes the operating system itself will have bugs, so it is best to install the official update program in time and reinstall the system if necessary.

12. Virus problem anti-virus; Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

It should be that there is too much software in your computer.,It's not clean when you're **,There's still in the registry and add-ins.,It is recommended that you use Windows Optimizer to clean up the registry and junk files and clean up the DLL function.,It should be OK.。

No way, what operating system are you using, if it's an XP in Tomato Garden, most of the problems will occur, change to a separate installation disk, and install it from the beginning.

Memory hardware problems, Kingston's memory is better, modern memory is more problematic.

Virus Problem: Antivirus.

There is some software that wants to read the memory of other software.

And there is no insertion.

That's going to happen.

Let's take a look at the system and give it a try. juju cat 10

If you purchase a new memory, it is likely that the compatibility is not good, so you can choose other memory. If it is a memory that has been used for a long time, this situation may be due to poor contact or damage, or the system may suffer from bad programs, the former can wipe the gold finger and try again, or it may need to repair or replace the memory, and the latter can be solved by reinstalling the system.

The memory cannot be read workaround is as follows:

Open the Start Menu - Run the cmd command line, enter cmd in the cmd window. At the command line, enter: for %1 in (%windir%system32*.).

dll) do s %1 , wait slowly after entering, and then open it after it is finished.

There is also a case that:

There are 3 ways to patch the system, replace the memory, and change the slot for the memory.

There are many reasons why memory cannot be read, and it is not enough to jump to conclusions.

If the driver is unstable or incompatible with the operating system or computer hardware, it is easy to cause the memory cannot be read error, enter for %1 in (%windir%system32*.) on the command linedll) do /s %1 ，

This situation can be dealt with with 360 Security Guard, and the functions of 360 Security Guard are still very comprehensive.

Happy New Year, friends, and all the best!

The reasons are summarized in the following aspects, which occasionally appear, point: cancel, you can!

1.The computer has been hit by a Trojan horse or a virus is interfering!

Try: Antivirus software, 360 Security Guard + 360 Antivirus Dual Engine Edition, or Mu Tenant Kingsoft Guardian + Kingsoft Antivirus, suggestion: fix "high-risk" and "important" vulnerabilities!

Use "Trojan Cloud Scan" and "360 Antivirus", "Full Scan" and "Custom Scan" viruses and Trojans, remove them, and restart your computer!

After turning on the device, click on "Isolate|".Recover", find trojans and viruses and remove them completely!

2.If the first method doesn't work, open: "360 Security Guard", "Trojan Horse Killing": "360 System First Aid Kit"!

First "Start First Aid", after the investigation is completed, delete the "suspicious startup items" and Trojan horses, and then restart the computer!

Then click on the "File Recovery Area", find the "Suspicious Startup Items" and the Trojan, and click "Delete Files Completely"!

Then click on "System Repair", "Jujube All", and then click "Repair Now"! Network Repair, Fix Now, Restart Your Computer!

3.With "360 Security Guard", "System Repair", one-click repair! Again: "Clean Plugins", Scan Now, Clean Up Now: Bad Review Plugins!

For the "latest version"!

QQ, or a variety of browsers, a variety of anti-virus software, a variety of online games, etc.)! They are not "compatible" together, remove the "redundant" one!

6.How to uninstall: You can find "Force uninstall software from your computer" in the "Start" menu in the lower left corner of your computer, and find the excess one to uninstall! After unloading, "strong cleaning"!

Or "360 Security Guard", "Software Manager", click on, item 4: "Software Uninstall", click on, find.

Uninstall software to "redundant" and "similar"! Such as: "** device", click on, leave "storm", uninstall "fast broadcast"! Such as: "**": click on, leave "Thunder", uninstall "Express"! (Unload when you see it, don't unload the useful).

8.No more, restart the computer, press "F8" after booting, press "Enter", press Enter, enter the "Safe Mode", "Advanced Boot Options", find: "Last correct configuration", press down to try, see how it works!

9.No more, start menu, run, enter cmd, press enter, Xun Hongzhao in the command prompt type (copy it):

for %1 in (%windir%\system32\*.ocx) do regsvr32 /s %1

Paste, press Enter, and type:

for %1 in (%windir%\system32\*.dll) do /s %1

Enter! Until screen scrolling stops, restart your computer!

10.If you really can't do it, "one-click restore" the system or "reinstall the system"!

The memory is not enough or is a little bad.