How to check my computer configuration, how to check my computer configuration

It's faster and hot-swappable. In the 20's there was also the emerging SATA-E interface.

Graphics card configuration. As an important part of the computer host, the graphics card is very important for people who like to play games and work in professional graphic design. The leading manufacturers of graphics chips for civilian graphics cards include ATI and NVIDIA.

ATI has been acquired by AMD and renamed AMD).

The full name is graphic processing unit, which is translated into Chinese"Graphics processor"。The concept was first proposed by NVIDIA when it announced the GeForce 256 graphics processing chip. GPUs allow graphics cards to be less dependent on CPUs and do some of the work that would otherwise be done by CPUs, especially when it comes to 3D graphics.

The core technologies used by GPUs include hardware T&L, cubic environment material mapping and vertex blending, texture compression and bump mapping mapping, dual texture four-pixel 256-bit rendering engine, etc., and hardware T&L technology can be said to be the hallmark of GPU.

The highest-end graphics cards on the market in 2020 are generally considered to be the NVIDIA 2080Ti and NVIDIA Titan X.

Graphics card. The basic function of the display card is to control the graphics output of the computer, which is connected to the display by the display card to be able to see the image on the display screen, and the display card is composed of a display chip, display memory, RAMDAC, etc., which determine the output on the computer screen, including the speed, color, and display resolution of the screen display. Graphics cards range from the early monochrome graphics cards, color graphics cards, and enhanced graphics graphics cards to VGA (Video Graphic Array) display graphics cards.

The maximum value of the pixel fill rate is the 3D clock multiplied by the number of rendering paths. For example, NVIDIA's GeForce 2 GTS chip has a core frequency of 200 MHz and 4 render pipelines, each containing 2 texture units. Then its fill rate is 4x2 pixels x 200 million seconds = 1.6 billion pixel seconds.

The pixels here make up what you see on the display, and at 800x600 there are a total of 800x600 = 480,000 pixels, and so on at 1024x768 resolution there are 1024x768 = 786,432 pixels. When playing games and using some graphics software, the resolution is often set, and when the resolution is higher, the display chip will render more pixels, so the size of the fill rate is of great significance to measure the performance of a graphics card. The GTS is calculated above to fill at 1.6 billion pixels per second, and then look at the MX200.

With a standard core frequency of 175 and only 2 render pipelines, it has a fill rate of 2x2 pixel seconds = 700 million pixel seconds, which is a big reason why its performance is half the difference compared to GTS.

As the name suggests, its main function is to temporarily store the data to be processed by the display chip and the data that has been processed. The more powerful the graphics cores, the more memory they need.

How do I view the basic information of my computer's configuration?

1. Check the computer configuration for system properties.

Right-click on the start menu of the win10 system and click on "Control Panel."

option, and then click on "System Security."

and then you have the overall configuration of the computer. As shown in the figure below.

2. Device Manager.

Check your computer's configuration.

Find "Device Manager" in the left column of "System" and click to enter, you can see the configuration information such as CPU, graphics card, sound card, network card, etc. As shown in the picture, the following is my computer CPU information (mine is Core i3 2310M, dual core, four threads, so the display is "4" CPUs).

Display adapter.

is the graphics card information, and the audio input and output are the microphone and sound card information.

3. DirectX diagnostic information to view the computer model and configuration.

Enter "dxdiag" in "Run" and press enter.

In the DirectX system diagnostics that opens, you will see the configuration information for your computer.

In the "Display" menu item, you can see the information of the graphics card.

Fourth, with the help of third-party software to view the computer model and configuration information.

What can be recommended here is Master Lu.

CPU-Z and so on. The way to do it is simple.

How to view: 1. View on the desktop. "My Computer" - "Properties", you can view the system version, CPU model, and memory size; If you click "General" - "Device Manager", you can view the number of CPU cores, hard disk model and size, optical drive and other configurations; If you click "Advanced" - "Performance Settings" - "Visuals" or "Advanced", you can view the settings such as visuals and virtual memory.

2. View "System Tools". Click "Start" - "Programs" - "Accessories" - "System Tools" - "System Information" to view the detailed configuration of the computer.

3. Software viewing. **Install Master Lu, Everest, Windows Optimizer, Super Bunny, etc., you can also view the detailed configuration, and these software can also test the performance of the computer.

4. View through the control panel.

5. Use the cmd command: dxdiag.

Just use Master Lu! The software also tests its performance.

I believe that everyone in life is not familiar with their own computer configuration, so how to check their computer configuration? Let's learn together!

Here's how to check the configuration of a computer:

Tools required: A computer.

1. Click the [Start] button on the four small squares at the bottom left of the computer.

2. After entering the start interface, click the [Settings] button at the bottom left like a gear.

3. Enter the settings interface and select the [System] option.

4. Find the [About] item in the left column and click to enter.

5. After entering [About], you can see the relevant computer configuration information on the right, in [Device Specifications] and [Windows Specifications].

Check the computer configuration by entering the "dxdiag" command in the runtime; The specific steps are as follows:

1. Enter "dxdiag" in the runtime.

2. If a DirectX Diagnostic Tool dialog box pops up, prompting us if we want to check, click OK.

3. Check the configuration information of the computer through the pop-up DirectX diagnostic tool interface

a. The red box in the figure below shows the CPU and memory information.

b. The red box in the figure below shows the graphics card and display information.

You can also click on the "Protect and Save All Information" in the lower right corner of the DirectX Diagnostic Tool interface to save the diagnostic information of the bureau including the computer configuration as a txt file.