On the question of how long it takes for the computer to run after turning it on, high fingers point

That's your motherboard problem.

You can set your IP to a fixed IP to make it!

If it doesn't work, you'll be able to add a question, and I'll take a look at it in a moment.

You're running --msconfig--start--undo everything except ctfmon.

There are so many apps!

The disk should also be defragmented.

Useless junk files are deleted.

Start --- run ---msconfig--- and after starting, everything else is turned off except for the antivirus and firewall and ctfmon. Here is a list of programs to start at boot.

Then click on the service, there is an option below, hide the system service item, in which you can see the antivirus software and firewall services, and the rest are turned off OK

There are still unclear messages to me.

There are a lot of viruses or clutter in the system.。。。 It is recommended that after the antivirus software is disinfected, clean up and optimize the system with Super Rabbit, and then reinstall it.

Reinstall the secondary system, press the optimization master to let you enjoy high-speed network life.

There is a problem with the network speed of your machine, **360 Optimizer wipe, put less things in the system disk of your computer, and put some important things on the line. Generally, it is best not to put the application software on the system disk. Use the IP address below:

Subnet Mask:

Add an IP address to the local connection.

Press Start - Settings - Network Connection - Open it and see that it has a local connection, and then double-click it to see a dialog box - Press Properties - find an Internet protocol and double-click to fill in the IP address, and the next time you restart the computer, it will be much more. It won't be the same phenomenon as you said.

It can be taken to a professional place for cleaning.

Then there's the reinstallation system.

It's been almost 2 years, and cleaning and optimization are no longer enough to meet the requirements, because your computer has more and more things in it, you can consider reinstalling the system.

Just start the process and boot service and remove what is not recommended by 360.

You are likely to have installed or upgraded the driver of some software, resulting in incompatibility, for example: upgrade the Adaptec aspi layer installer of RealPlayer, you can boot up and press the F8 key, select to enter the "last correct configuration" to try, if it still doesn't work, it may also be that the memory module is in poor contact, you can pull it out and then plug it back in to try, if it doesn't work, you can think about whether you have recently installed any software or hardware, In particular, if the software such as the shadow system or the frozen system is incompatible, or if you have made inappropriate changes to the settings of a certain software or hardware, and whether you have applied something that is not suitable, incompatible vulnerability patches, etc., uninstall it and try it.

Take a look at the following article:

Windows 2000 XP BSOD is too much information to be fully explained in one article, but the causes of their occurrence tend to focus on incompatible hardware and drivers, problematic software, viruses, etc., so first provide you with some general solutions, after encountering the BSOD error, you should first rule out these schemes.

1.Reboot Sometimes it's just a bug in a program or driver, and they change over after a reboot.

2.New Hardware First of all, it should be checked that the new hardware is plugged in, this problem, which is overlooked by many people, often leads to many inexplicable failures. If you confirm that there is no problem, unplug it, try it in a different slot, and install the latest drivers.

You should also check whether the hardware is compatible with the operating system against Microsoft's hardware compatibility list. If your hardware is not in the table, then get the hardware manufacturer** to inquire or call their inquiry**.

It takes half an hour to boot up, which means that from pressing the power button to the system interface appearing.

Or does it mean that it takes half an hour to start after repeated boots??

Generally the latter is because of the power supply. If it's the former, there's something wrong with the system or hardware.

From the inside out, first soft and then hard. Let's take a look at the system startup process, the general family uses 18 to 22, if there are more, prohibit some, if it is not a matter of the system process, pull out the hardware again, wipe it clean in the installation and try, if it doesn't work, just do it back to the system to see if it is still half an hour If it is still to get a professional repair computer place to check the hardware where there is a problem!!

My old machine is also, in winter, it takes a while to run before entering the system, you can try the following 1, remove the hardware in the main chassis and wipe it off, 2, completely remove the dust in all parts of the chassis.

3. Ensure that the hardware is in reliable contact.

4. Clean up the system garbage generated.

The weather is cold, and the hard disk and motherboard function have been stopped overnight and have not been restored in a short period of time after powering on. Just like an engine in the snow and ice, it can't be started immediately after the power is turned on, and it takes a while to warm up.

You can plug in the main unit and the monitor half an hour before turning it on, let it plug in, and turn it on again half an hour later. Or you can also leave the plug unplugged after shutting it down after using it the night before.

I think it's the system.,If it doesn't work under reinstallation, then it looks like you're going to spend money.,It's a hardware problem.。

Unplug the memory and erase the gold finger with an eraser.

It can solve the problem of most systems being slow.

There are many reasons for this, such as:

The system configuration is too old, the system process is loading slowly, the computer system is going to load a lot of processes after booting, and if it is loaded, it can run normally, if the configuration is too old, the loading speed will be very slow, and there will definitely be the situation you said.

Computer driver problem, the impact of the driver on the performance of the computer is not insignificant, so it is necessary to change the computer driver appropriately.