Use a wireless game to surf the Internet on your laptop

The cat connects you to the router.

Then go inside the router).

Username: admin

Password: admin

Fill in your internet username and password.

The desktop is connected directly to your router with the net.

This book is connected wirelessly

By the way, whether Telecom gave you a cat or a router, you can't figure it out

It's not a wireless router on the laptop, it's a wireless network card.

Then tap Connect and if the wireless router has a password, enter the same when connecting.

The password is good to go.

The laptop comes with a wireless network card, you connect the telecom broadband cable to the WAN port of the wireless router, and the desktop is connected to the LAN port of the wireless router, and then refer to the manual of the router, log in to the router configuration interface to set it up, enter the account password of the telecom broadband into it, and enable the wireless of the router by the way. In this way, it is possible to access the Internet at the same time on both desktop and laptop.

The laptop comes with a wireless network card, not a wireless router!

Connect the broadband modem to the router, and then set the router's wireless network to open.

1.The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, connect each computer to the LAN port of the router, and the IP address of the computer network card is set to be automatically obtained, enter it in the address bar of the computer browser, and specifically check the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, and the general user name and secret code are admin, Select the WAN port settings, and set your broadband account and password to the PPPoE mode.

2.If the notebook uses wireless Internet access, the operation is as follows: the right hall shed key network adjacent to the hall then home - properties - right click wireless network connection - view the available wireless network, click your wireless network name in the searched wireless network - connection, and enter your wireless network key for verification, after passing the verification, you can connect to the wireless router to surf the Internet normally;

1. Check whether the DHCP in the router is turned on (the IP of the computer can be automatically obtained when the DHCP is turned on) and the IP address pool (this is related to the router's network access or prohibiting certain IP addresses from accessing the network).

2. Check whether there is a MAC address and IP binding in the router (the MAC address of wireless and wired is not the same, because it is a different device).

3. Whether the laptop network card (not the wireless one) automatically obtains the IP address, gateway, subnet mask and DNS address is correct.

It is recommended that you manually set the IP address so that it can be easily managed in the router. Oh, and you don't need to dial again after connecting with a cable (I guess you're dialing on a router).

Because you can already ping,Then it is recommended that you focus on checking 1,2,and the DNS settings of the notebook (this is more important, if the DNS is not right, then you can use QQ to see the web page, if you are in this situation, set the DNS).

Agree with the old gun way, look at the DNS I think is the key.

First: you have to determine whether your book has a wireless Internet function, if not, you have to add a wireless network card;

Second: If you have it, turn on the wireless network acceptance switch; (The switch is generally under the hard disk light) Third: the main program setting is to turn on the wireless Internet access and turn the "properties" of the "Internet neighbor" to the "wireless network connection status" in the properties of the online neighbor;

Fourth: If you don't have a Wi-Fi connection, you need to install the Wi-Fi driver, which you have on this disc when you buy the driver.

Fifth: In "Properties", click "Wireless Network Configuration", click "Wireless Network Configuration", click "Add" under "Preferred Network", click "Association", set the service name SSID to be the same as the ESSID of the AP, and then use DHCP to set the IP to automatically obtain. All settings are complete.

Is the router set up? Is wireless on?

1. If the router is set, is it normal after the desktop is connected to the router? If your desktop is also unable to access the Internet, it means that there is a problem with your dial-up settings, and you need to set up the dial-up connection of your router first.

2. If the wireless function is set, first check whether the firewall of your wireless router is turned on, turn off the firewall first, do not have any password, try to connect, if you can connect to the network, it means that your router firewall is set up again, and the firewall needs to be set again.

Connect the router to the model with a network cable, enter the router to set up an account, there is an address and password on the label on the back of the router, and then set a wireless access control password.

Just buy a router and set it up.