What should I do if my phone can t access the mobile network?

1.Check whether the mobile phone has turned on the network switch, the mobile phone needs to turn on the network connection function to connect to the network. 2. Check whether the mobile phone is in arrears, the mobile phone in arrears cannot be connected to the data network and needs to be recharged.

3. If you can't access the mobile network due to network delay, you can turn on the airplane mode of the mobile phone, turn it off after five seconds, and then reconnect to the network or restart the mobile phone. 4. If the network settings are not set up, you can call the operator to which the mobile phone card belongs, and ask the customer service to send the relevant data of the Internet settings and set it according to the prompts. 5. If the signal in the place is not good, you can't connect to the mobile network, you can change the place and connect again.

Swipe your phone to the home page, tap the menu button on your phone, and select Settings in the menu that pops up.

In the settings page that opens, select Wireless & Networks.

On the Open page, find Mobile Network Settings and click Open.

Open the access point name.

Select CMWAP

If the mobile phone can't ask the network, then you first have to check whether it is the reason for the mobile phone. You can factory reset your phone, or adjust your phone's data flow. Then check whether your mobile phone card has the corresponding network traffic enabled.

It may be that there is no traffic.

Or maybe it's a cell phone signal problem.

You can restart your phone.

Or turn on airplane mode.

It can generally be solved.

It is recommended that you shut down and restart it, or if it is not a signal problem in your location.

1. Check your phone's settings.

Open the mobile phone Quick Center (scroll down at the top or scroll up at the bottom) to see if the data network is turned on.

2. Confirm the status of the mobile phone card.

Make sure that the balance of the mobile phone card is sufficient, if the payment is in arrears, please restart the mobile phone after the recharge is successful. Check with your carrier to see if the traffic limit has been met or whether the data network function has been enabled. If necessary, you can change the SIM card that can access the Internet normally to confirm.

3. Check the mobile phone signal.

If your phone uses a metal, magnetic case or bracket that has an impact on your phone's signal, we recommend that you remove it and try it. If you are in an underground parking lot, elevator hall and other environments, the coverage of the mobile phone signal is susceptible to these environmental impacts, the signal will be relatively weak, and the data network will also be affected, so it is recommended to go to an open area, such as an outdoor open environment for testing. Hyo-pei.

4. Check the network permissions.

Please go to Mobile Phone i-Manager - Traffic Management Traffic Monitoring - Network Management or Set Applications and Permissions - Permission Management Brief Zen to check whether the application network permission has been enabled.

5. Check V-P-N (Virtual Private Network).

Please go to Settings - Other Networks and Connections - v-p-n, check and confirm whether v-p-n is used, if so, it is recommended to turn off and try again.

6. Check the network settings.

Please go to Mobile Network Settings - Mobile Network (SIM Card Information and Settings - Corresponding SIM Card) - Access Point (APN) or Set Mobile Network Dual SIM and Mobile Network - Access Point (APN) and click"Reset to the default settings"restart your phone.

7. Re-search the network.

Please go to Settings - (Other Networks & Connections) - Airplane Mode - Turn on and off.

8. Reset the network settings.

Resetting network settings will delete the connection records of WLAN, mobile data network, Bluetooth and other networks, you can go to Settings - System Management - Backup and Reset - Reset Network Settings - Reset Settings - Follow the prompts to operate (you need to select the corresponding SIM card when dual SIM).

Note: Go to the cloud service - data synchronization - turn on WLAN, Bluetooth, etc. to synchronize data to the cloud service. Go to "Cloud Services" -- Device Cloud Backup -- Backup Data Type -- Open "System Data" -- Return to the previous page -- Back up now to back up some system settings data.

9. Reset all settings (do this when you can't see the reset network settings menu).

This operation will not delete the file or software, it will cancel the password and restore all settings, including: wallpaper settings, unlock style, wifi, default opening programs, etc.

Note: Go to Cloud Service - Device Cloud Backup - Backup Data Type - System Data - Return - Back to Back Up Now to back up some system settings and desktop layout;

Cloud service--Data synchronization--Turn on WLAN, Bluetooth, etc. to synchronize data to cloud service.

1. Solution 1: Confirm whether the mobile phone is in arrears. 2. The mobile phone cannot go online normally after arrears, so if your mobile phone obviously has a signal and there is no problem, that is, you can't use the mobile data network to access the Internet, confirm whether the mobile phone is in arrears, if it is really in arrears, recharge it quickly and resume normal Internet access.

3. Solution 2: Restart the mobile network switch 4. Pull down at the top of the screen of the mobile phone or swipe up at the bottom of the screen to bring up the notification bar of the mobile phone, and then in the notification bar interface, find the [Mobile Data] option, click this switch to turn it off, and after the switch becomes gray, click to turn it on, and then try to see if the mobile phone can surf the Internet normally. 5. Solution 3:

Restart the phone 6, press and hold the power button of the phone, in the pop-up interface, find the [Restart the phone] option, and click to restart the phone, after the phone is successfully restarted, turn on the mobile data switch of the phone and try whether it can go online.

Hello, glad to answer for you. There can be a situation where your phone can't access the mobile network, there can be a variety of reasons, here are some possible reasons and how to fix them:1

Incorrect network settings: Open Settings to check whether the mobile network settings are correct, such as whether the password is entered correctly. 3.

The mobile phone system is envious and the system is updated: Sometimes the problem will occur after the mobile phone is updated, enter the settings, upgrade the mobile phone system or restore the factory brother settings. 4.

Mobile network is not turned on on your phone: Open Settings and check if mobile data is turned on in the mobile network options. 6.

If the payment of the mobile phone card is in arrears, you will not be able to use the mobile network. 7.

If the SIM card fails, try to replace the SIM card or contact your carrier to replace it. If none of the above methods solve the problem, you need to contact the mobile phone manufacturer or your carrier for further inspection and repair.

Sometimes, the phone will prompt "unable to access the mobile network", in this case, how do we set up the phone? Next, I will explain to you how to set the mobile phone prompt "unable to access the mobile network"? Let's take a look.

01 Turn on your phone, find [Settings] on the desktop of your phone, and click to enter. Confusion.

02 After entering the [Settings] page, click [Dual SIM & Mobile Network] and enter.

03 After entering [Dual SIM & Mobile Network], click [Access Point] and enter.

04 After entering the interface of [Access Point], check the [China Mobile Internet Settings Shenchong] below, that is, [CMNET], and after the check is completed, you can go back.

05 Then, turn off the mobile phone, and then restart it, and the restarted mobile phone should be able to use Youyu Jan normally.

Situation 1: If the mobile phone is not fully Netcom, but the mobile phone card of China Telecom is used, you can enter "*" to view the identification code of the mobile phone by dialing the key, if there are three, and one of them is the MEID option, the mobile phone is full Netcom.

Situation 2: If there is a device that shields the signal nearby, such as living near the school and the school is taking an exam, this situation will generally not occur for too long, and it will return to normal after the test is over.

Situation 3: In the settings of the mobile phone, the network is automatically selected and the network is turned off, you can enter the settings, dual SIM and mobile network, SIM card information, enter the hidden operator, and turn on the selected network.

The solution to the mobile phone card cannot access the mobile blocking network can be achieved by the following steps (take Android phones as an example):

1. On the desktop of your Android phone, click the settings icon to enter.

2. Enter the list menu and click on the wireless and network options to enter.

<>4. Enter the mobile network settings interface and click the access point name option to enter.

5. Check the CMWAP option.

6. Go back and click on the Hail option next to the network mode to enter.

7. Finally, check the CGM WCDMA automatic option.