How can I block the routing function of the sub router?

We're here to pick it up, we're using it, you can try it.

After the first router WAN is configured, there are four ports used to connect to the computer, if you connect to the computer, of course, you can access the Internet, but now you can't connect to four, you connect to three computers, these three can access the Internet, this router still has a LAN port and one of the four LAN ports of the second router is connected with a level networking cable, (Note: It is connected to the LAN port of the second router, not the WAN port, and it is a level networking line, not a straight-through network cable. The straight-through network cable is the network cable of the computer connected to the router", the difference between them is that the corresponding way of the line is different, if you only have a straight-through network cable, you can try it with a straight-through network cable first, some routers can be automatically identified, if not, you can use 2 yuan to do one. Then connect the rest of the computers to the LAN port of the second router, (that is to say, do not use the WAN port of the second router, and the IP of the second router should be different from the IP of the first router, of course, it should be different from the IP of other computers, this is for sure, turn off the DHCP of the second router).

If you're still struggling, you can give it a try, and we'll help you then.

Set the IP of your sub-route to any IP in the network segment (including gateway mask DNS), use automatic connection, do not need to set the others, use the common port when connecting, and then the route is only equivalent to the function of a switch.

Summary. 2 Enter the administrator password and enter the main interface: click Internet Control on the left side3

Click on the host list in the Internet control,Click to add a single entry,Here you need to select the IP addressMACaddress,MACaddress needs to be filled in with the MAC address of the TV box。 View method Click on the left side of the DHCP server --- client list on the right side can see and then we go back to the router to add the host and enter the MAC address into it. It's best to use uppercase.

Write the hostname as you like to save it.

Hello, first check the IP address at the bottom of the router, as well as the administrator password, enter the login on the computer, find the relevant settings to block certain devices or set the maximum number of access devices.

1.Enter the router in the browser first, and the general default is the same. If it's different, please look at your router's manual or the bottom of the router.

2 Enter the administrator password and enter the main interface: click Internet Control on the left side3Click on the host list in the Internet control,Click to add a single entry,Here you need to select the IP addressMACaddress,MACaddress needs to be filled in with the MAC address of the TV box。

View method Click on the left side of the DHCP server --- client list on the right side can see and then we go back to the router to add the host and enter the MAC address into it. It's best to use uppercase. Write the hostname as you like to save it.

4.Then return to the access target,Click to add a single entry,Here you still need to select the IP address there**Domain name,Fill in the target description at will,**Enter the following**:Because you want to block Xiaomi's ads,Here are several Xiaomi's ads**All added。

After saving, return to Rule Management, and select Internet Access Control. Then set: All data packets that meet the set Internet access control rules are forbidden to add a single entry through this router.

Rule descriptions are written at will. Host List: Select the name of the host list you just set. Access Target: Select the name of the access destination you just saved. Leave the rest alone and save it directly.

How to shield your router's signal: Hide your router's wireless signal.

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Enter the router interface and click [Wireless Settings].

3. Click Basic Settings.

4. Uncheck [Enable SSID Broadcasting] and click [Save].

5. Restart the router.

Just turn on MAC filtering and you're good to go! I'm really worried about encrypting the wireless network into wap2! Absolutely no problem!

Modify the SSID and do not broadcast. Encrypt it. Change the password of the router login account. Set up MAC filtering.

See what he does. If you're not using wireless, simply turn it off.

You can set up your wireless, there is a type or something like that, you can modify your wireless parameters, why bother? ?

Change your SSID, don't broadcast, and add a password. In this way, I guess they won't be able to get on...

The router shields specific IP addresses through the client filtering feature.

Tengda router client filter setting steps:

1.Log in to the Tengda router interface - click on the upper right corner"Advanced settings"button, 2. Click in the advanced settings interface"Security settings"--"Client-side filtering":

3.Select the filter mode, blocked IP address range, port range, all types, and specify the time. Click Activate.

In this example, computers with IP addresses within the range are prohibited from accessing the Internet.

In View available wireless connections, adjust the router order, turn the one you want to connect to up, or set the connection attribute of the router you don't want to connect to, and remove the automatic connection.

The main thing is that you can distinguish between the two wireless routers in the wireless connection manager, so that you can set one to always log in automatically, etc. If you can't distinguish between the Windows built-in manager, you can use the manager of the wireless network card drive belt.

In fact, this amount of radiation can only be said hehehe. However, if you have to shield, you can follow the metal shielding effect, and you can add steel bars to the inside of the house, just like making a cage, you can shield.

Due to my work, I worked in the shielding room, but the outside signal couldn't come in at all.

The basic method is the "metal cage", when decorating, the walls, ceilings, and floors of your home are packed into regular metal wires, grid-shaped, and not too dense 10 30 cm.

However, there is still a job to be done, to leave a signal for the mobile phone, which needs to be contacted by China Telecom or China Unicom or Mobile. When you go home, you don't need to use your mobile phone, just a landline, so you don't have to do this.