DNF memory usage is too much, card

Let me tell you a trick, it definitely works, this is my experience from playing DNF for two years. My computer memory is the same as yours. In the past, playing DNF was also a very card, because I played in the telecom area, and I used Netcom's broadband, and it turned out to be a very card every day, and then I changed to Netcom 4G, which is still a card.

In the end, it was changed to telecom broadband, and a miracle happened, and now DNF is turned on all day and night. So if you play in the telecom area, you will install telecom broadband, and if you play in the netcom area, you will install netcom broadband. You'll know when you install it.

DNF is a very good game, and you don't want to lose a lot of players because of the card. It's no reason to type so many words, I just hope everyone can play dnf smoothly, it was too painful to get stuck back then, so I hope you don't have to suffer. Do unto others as you would have them do to you.

Your graphics card doesn't match your network.

There is no mode conversion in the win7 you installed (that is the energy-saving one).

Although the memory 2G is large, it may be a problem with your graphics card.

Win7The minimum memory should also be 4G, otherwise it will be very stuck. You don't run the game when you boot it up, and it takes more than 600m.

You're using win7???

I'll go.,You're still playing.,My buddy is also win7.,Quitting yourself within 10 minutes of playing dnf.。 Later, it was good to reinstall the system 5 times.

Your next game optimizer gives it a try first.

Install a memory optimization software to optimize a few times each time you play Remove unnecessary large memory stuff It's a CPU problem. The internet speed is slow, and the CPU runs fast. Or there are too many programs open at the same time, such as QQ, MSN, etc

When many netizens play online games such as DNF (Dungeons and Warriors), they find that playing DNF occupies more and more memory, and the 8G memory is quickly eaten up, and the computer response speed is like a snail, and then it prompts that the memory is insufficient, bringing a series of problems. So what should I do if DNF takes up too much memory? I have shared the specific operation method for you, friends in need can refer to it!

What should I do if the memory is too large?

When you boot up and open DNF, there will be a window service process and DNF to grab memory. My small 4G memory couldn't bear it at all, so it was blown up.

Then the service of the guard-type shielding system will be lowered instantly, and it will not continue to be re-improved.

In short, it was stopped with one click of the guard. And if you don't open DNF and stop it again, it will still blow up when you go in, and you can only block it if you open DNF.

The following is a memory cleaning software specifically for dnf made by players, I hope it can be helpful to everyone.

The usage is very simple, run the game, enter the game, and click to clean up the memory. Some Win7 8 users do not need to install it to run it directly.

XP users must install dotnetfx40 full x86 and install dotnetfx40 full x86 themselves, that is. .NET framework runtime, if you have installed it before, you don't need it.

Running renderings:

dnfBlack screenThe stuttering is a memory issue。Because everyone should have a certain understanding of the reasons why DNF does not run smoothly. If it's the number of frames.

Low、The kind of unsmoothness of stuttering,Most of the time is the performance of the CPU and memory is not enough,If it is a black screen over the picture,The speed of the upper number is slow, and the kind of unfluency means that the memory is broken,So DNF black screen Caton is a memory problem。

In addition to this, there are also non-hardware effects, such as network latency.

Excessive game cache, improper computer debugging, etc.

DNF's way to improve fluencyVertical synchronization. This is a setup where when you are strong, and even weaker when you are weak. Turning on V-Sync in high-end configurations can improve the smoothness of the picture.

However, if the computer itself is more stuck than Mengshi, the vertical synchronization will only become more stuck, and the frame rate per second is limited: it is recommended to decide according to the stable frame rate of its own configuration, and it is not necessary to be full if the configuration is not enough.

The following describes how to solve DNF memory usage that takes up more than 90 percent:

Operating environment: dellxps13-9305, win10, version.

1. First of all, open the 360 safe position hovering ball to see the value of the occupied memory.

2. Click on the levitation ball and then click the expand button below.

3. Select the unwanted program and click Deep Acceleration to close it.

4. Then the value of occupied memory will be reduced.

Playing dnf physical memory is too high because the machine hardware can't meet the requirements, and when the machine meets the minimum requirements, this problem can be solved.

1. Minimum configuration:

CPU: Inter i3 or other models of the same class.

Graphics card: 512M or more video memory.

Memory: 4G hard disk space: 25GB or more.

System operation: win7 32bit or above.

CPU: Inter i5-7 generation or above or other models of the same levelGraphics card: Intel(R) HD Graphics or discrete graphics card memory: 8G and above.

Hard disk space: 50GB or more.

System operation: win10 64bit or above.

Gaming PC Configuration Considerations:1. For a computer, the most important thing is that the performance determines the performance of the computer.

2. The second one is GPU. A good GPU determines the image quality. Regarding GPU, you can choose low power consumption and high configuration.

3. The motherboard is equivalent to the blood vessels of the computer. Coordination can only be better if the motherboard is good.

4. Memory is juxtaposed, all computer programs run in memory, while the hard disk determines the storage capacity. You can choose between 256GB SSD and 1TB HDD. SSDs are used for quick boots, and HDDs can store some data.

The current DNF has been upgraded from 32-bit to 34-bit after an update, so now 8G memory is simply not enough. In the past, there was no problem with double opening 8G memory, but now it takes up more than 90% of the insight into Hillock, so if you still have 8G memory, add a memory stick, it will be much smoother.

Today I will share with you a win10 system to play dnf stuck, the solution to the system memory occupancy is too high.

First of all, I saw this on the forum, and I just used it. Stuck when playing dnf is a frequent occurrence,Let's talk about this method,It's not very proficient in computers.,The only little knowledge you learn is to let DNF force it.,It doesn't work first.。 If you have this situation, you can try it, use it if it works, and change it back if it doesn't work.

The main problem is to use an SSD (that is, an SSD) to play games, and then the memory usage is very high after booting, such as up to 70%, and then at this time open the task manager to check the process, and find that all the processes add up to not much.

For example, a computer with 16GB of RAM occupies 70%, but all the processes in the task manager may add up to less than 1GB.

The memory programs add up to less than 2G, but the memory takes up 55%.

The SSD uses the memory as its own cache, which will happen if this feature is turned on.

As for why the SSD uses the memory as its own cache and this mechanism, I don't understand, just talk about how to turn off this function.

This PC Properties Device Manager Disk Drive Find the SSD Right-click Properties Policies Turn off Enable write caching on the device.

There is also an SSD that comes with its own optimization software, such as Samsung's Sansung Magician, and turns off the RAPID mode.

There is no optimization software for this software, but I will share the method with you, and then if you can't find it, you can use the first method.

Okay, the method is shared. Then some people who may not know much about computers will ask which one is solid, such as the picture below, there are two.

Yes, in fact, the first one is solid-state, because the solid-state is 128g, obviously, but if you still don't know or look confused.

This PC Properties Management Disk Management.

Click on the properties on the two disks respectively, and you can find the name of the disk, and then you can also directly enter the "policy" to disable the function from here.