The host can t start, and the system disk can t be read when it s put in, what should I do?

This situation is still rare, at least there will not be a situation where you can't even get into the BIOS.

In this way, you take down the battery on the motherboard, put it for about 3 hours, so that the motherboard will have a reconfiguration (that is, all the records in it will be deleted), at this time you take a look at your optical drive, whether the hard disk is damaged, of course, the connection cable should also be seen, and finally this keyboard, don't get so much, the keyboard is broken, then depressed, and at the same time, it should be noted that the keyboard does not use the USP port at the end, and it is better to use the PS2 port.

At this time, check that there is no problem when you enter the BIOS to see if you can get in, if you can enter, turn on the disc boot mode and it's OK!

F1 can't get into the system? del can't enter the bios to check if there is a fault with the optical drive or the hard drive

First of all, unplug the data cable of the optical drive, the driver, see if you can enter the BIOS by pressing del, if you can't unplug the hard disk, see if it doesn't work, or check whether the keyboard is broken, hehe, sometimes a small fault, will be misdiagnosed as a big problem, change the keyboard.

The problem is still sent for repair

Set the optical drive boot in the BIOS.

Press DEL, select the second one after entering the interface, then find FIR and select CD ***. Press F10 and select Y to restart.

Check the CPU or motherboard.

Press f1 to continue, generally such a problem is caused by the battery on the main version is dead.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

1) Hard disk failure: The hard disk may fail, causing the computer to be unable to read the data in the hard disk, so that it cannot be turned on. Virtual or (2) BIOS setting error:

Incorrect BIOS settings can also cause the computer to be unable to read the data on the hard drive and thus fail to boot on. 2.Workaround:

1) Check the hard drive: First of all, check whether the hard drive is faulty, if it fails, you can try to replace the hard drive, or use a hard drive detection tool to detect it to determine whether the hard drive can be used normally. (2) Check BIOS settings:

Second, check the BIOS settings to make sure that the hard drive is set up correctly for boot items so that the computer can read the data from the hard drive correctly. 3.Steps:

1) Check the hard drive: aTurn on the computer, remove the hard drive, and check if there are any damaged parts of the hard drive; b.

Plug the hard drive into your computer and use the hard drive detection tool to detect whether the hard drive can be used normally; (2) Check BIOS settings: ATurn on the computer and enter the BIOS settings interface; b.

Locate the "Startup Items" setting and make sure your hard drive is correctly set up as a startup item; c.Save the settings, restart the computer, and check if it can boot normally. 4.

Personal tip: The reason why the computer does not read the disk when it is turned on may be a hard disk failure or the BIOS setting is wrong, so when you encounter this situation, you should first check whether the hard disk is faulty, and then check the BIOS settings to make sure that the hard disk is correctly set to boot items, so that the computer can correctly read the data in the hard disk.

Summary. Hello, I am glad to serve you and give you the following answers: the computer host does not read the disk when it is turned on, which may be caused by hard disk failure, hard disk interface damage, hard disk damage, improper BIOS settings, etc.

First of all, you should check whether the interface of the hard disk is damaged, and if the interface is damaged, you should replace it with a new one; Secondly, check whether the hard disk is faulty, and if it is, replace it with a new one; Finally, check if the BIOS settings are correct, if not, the BIOS should be set up again. If none of the above measures can solve the problem, it may be that the hard drive is damaged and you should replace it with a new one.

What's going on with the computer host not reading the disk when it is turned on.

Hello, I am glad to serve you and give you the following answers: the computer host does not read the disk when it is turned on, which may be caused by hard disk failure, hard disk interface damage, hard disk damage, improper BIOS settings, etc. First of all, you should check whether the interface of the hard disk is damaged, and if the interface is damaged, you should replace it with a new one; Secondly, check whether the hard disk is faulty, and if it is, replace it with a new one; Finally, check if the BIOS settings are correct, if not, the BIOS should be set up again.

If none of the above measures can solve the problem, it may be that the hard drive is damaged and you should replace it with a new one.

Can you tell us more about that?

Hello, I am glad to serve you and give you the following answers: the computer host does not read the disk when it is turned on, which may be caused by hard disk failure, hard disk interface damage, hard disk damage, improper BIOS settings, etc. First of all, you should check whether the interface of the hard disk is damaged, and if the interface is damaged, you should replace it with a new one; Secondly, check whether the hard disk is faulty, and if it is, replace it with a new one; Finally, check if the BIOS settings are correct, if not, the BIOS should be set up again.

If none of the above measures can solve the problem, it may be that the hard drive is damaged and you should replace it with a new one.

Summary. The computer host does not read the disk when it is turned on because of hardware or software problems, the system cannot boot normally due to the problem of optical drive, or it may be due to the problem of BIOS settings, or the system files are corrupted, resulting in the failure to boot normally.

The computer host does not read the disk when it is turned on because of hardware or software problems, the system cannot boot normally due to the problem of optical drive, or it may be due to the problem of BIOS settings, or the system files are corrupted, resulting in the failure to boot normally.

You've done a great job! Can you elaborate on that?

If the computer does not read the disk when it is turned on, you can perform hardware or software exclusion, for example, check whether the optical drive is normal, check whether the BIOS settings are correct, and reinstall the system.

Summary. Dear, hello, I'm glad to answer for you, because the system did not find or could not recognize the hard disk after booting; This kind of problem usually causes the system to fail to boot the hard disk, even after using other methods to boot the computer, it is difficult for the computer to recognize the hard disk, and the current hard disk generally does not have motherboard compatibility problems.

Dear, hello, I'm glad to answer for you, because the system does not find or the sailer cannot recognize the hard disk after booting; This kind of problem usually causes the system to fail to have a hard disk to boot, even if it is difficult for the computer to recognize the hard disk after using other methods to start the computer, and the current hard disk generally does not have problems with the compatibility of the motherboard.

Can you elaborate on that a little bit more?

Improper BIOS settings lead to hard disk problems, and today's motherboards use the function of automatically detecting the type of hard disk and the brand and model, but some motherboards may have the wrong situation of identifying the type of hard disk when running, and this situation will also cause the computer to not recognize the hard disk.