Line6 M13 factory reset

Factory Reset: Sometimes you may want to reset the factory settings of your M13. You may want to recall a particular factory site, eg: To do a factory reset, first back up any scenes you want to keep (see page 2 of MIDI backup 5) and then follow these steps:

gōng工 chǎngFactory fù复 wèi位 yǒu有 shí时 nín你 kě可 néng能 xiǎng想 chóng重 zhì置 nǐ你 de的 m 1 3 de的 chū出 chǎngFactory shèset zhì置 . nǐ你 kě可 néng能 xiǎng想 huí回 yì念 qǐ起 yī一 gè個 tè特 bié 不 de的 gōng工 chǎngFactory xiàn现 chǎng场 , lì例 rú如 . zuò做 yī一 gè個 gōng工 chǎngFactory fù复 wèi位 , shǒu首 xiān先 bèi备 fèn份 rèn任 hé何 de的 chǎng场 jǐng景 , nǐ你 xiǎng想 bǎo保 chí持 ( jiànSee 2 yèpage m i d i bèi prepare fèn份 5 ) rán然 hòu後 ànPress zhào照 zhè this xiē些 bù步 zhòu�� :

turn the model select knob under lcd 4 until “rst fact?” is displayed. •press down on the model select knob - reset to factory?

will be displayed. •to initiate the factory reset, press down on the model select knob again. •all factory defaults will be reset, including scene presets and global settings.

The fact that the 4 knobs under the model are selected until "RST?" Display. Press the model selection knob - "Reset the factory?"

will be displayed. To start the factory reset, press the model selection knob again. All factory defaults are reset, including scene presets and global settings.

It doesn't seem to say that holding down which Jianzi can turn on or something, you can do this, in the monkey, another flash update, after that update, go to the guitar China and ask for a copy of other people's preset files, it's a pity that I can't help you, mine is xt live

Hello, press and hold the right arrow button when the power is off, and then turn it on.

Adopt it, thank you.

To restore factory settings, you can go to System Settings to find it.

The factory timbre is all rubbish, you have to learn to tune the timbre yourself, listen to it with your ears, and compare the timbre of the performers.

In **shouting good funny monkey monkey socks after dismantling**flash memory, monkey function do not disconnect when updating Zheng Sell, you can flash the machine, please give me a few points, even a single digit.

Do the reset of the OLT, be careful, it will be disconnected.

era f d

Y is fine. Reb sysy needs to be restarted

The common commands are similar, but there are some differences between the various versions of the command line. Follow the prompts and you're good to go.

1. First of all, we have to check to see if the magic box can enter the system. If you can get in, use soft recovery. If you can't get in, use hard recovery. It is highly recommended that you check it out first, as hard recovery is a bit of a hassle.

2. If you can enter the system, enter"Settings --About--Restore factory settings", click "Confirm Restore".

3. If you can't enter the system, use hard recovery. First of all, make sure to unplug all external devices (including power cables) during the recovery process, leaving only the magic box.

4. Press and hold it with a hard needle (the 1st generation magic box is on the back of the box; 1S magic box at the rear socket) of the recover hole, do not let go.

5. Plug in the small hole and plug in the power supply at the same time, and wait for the indicator to flash red and blue for about 3 seconds. (You know why hard recovery is troublesome).

6. Hold the recovery hole with a hard needle, wait for the TV screen to appear the picture of the kitten jumping, and some may take a little longer, wait patiently. Once it appears, release the hard needle and the system will automatically reload.

7. The box will automatically restart after reinstallation.