Why does the new Acer 4738ZG hard drive keep clicking? Is it broken?

The sound of the hard disk is loud, the sound of the hard disk is mainly a gurgling sound, the hard disk of bad quality will be louder, and if the hard disk fragments are too much, the workload of the hard disk will be increased and the sound will be louder, and there is a situation that the hard disk has a bad sector, which will also lead to the sound of the hard disk to increase, just scan it, and defragmentation should be done, by the way, BT and other **tool** files will produce a large number of disk fragments, and the solution is to dump the movie that has been ** every time ** is completed, Save to another partition.

If the hard disk is bought like this, and the computer can be used normally, it means that the hard disk is fine, most hard disks will have a little sound when reading and writing data, and it is a new hard disk now. If it's an old hard drive, it's louder, squeaky and noisy people are upset.

If the hard drive doesn't have this sound at the beginning, and it appears after a period of use, then there is something wrong. If the hard drive has a scratch sound like you said, it should be a malfunction of the hard drive motor.

If the computer often crashes, blue screens and other abnormal phenomena during use, it means that the hard disk is really broken.

Normal. Mine is 4535g, and the hard drive also has this phenomenon. Normal, does not affect.

Normally, after a long time, this situation will occur. Nothing.

It's normal.

Feel free to use it.

It's not broken, so don't be afraid of normal.

Normal disc reading sound and disc reading indicator.

This is the turning sound of the head of the hard disk homing.

And the hard disk is writing instructions!

It has nothing to do with Hippiyu!

Every hard drive has its own operating and homing noise, but the size is different!

Lonely mountain man.

The sound of the head seeker is that the arm with the head is swinging back and forth on the surface of the disk to find data, and the sound is louder when reading and writing a large amount of data, to see if there is any software reading the hard disk!! It is recommended to check the fragments under the disk cleanup for a while, my Acer hard drive is also quite loud, and the heat is also big!!

It usually occurs in software or hardware conflicts or poisoning, if it is a conflict, uninstall the newly installed software, and then reinstall the driver. If not, completely reinstall the system, absolutely can!

This should be the famous World of Warcraft card blue bar event on win7.

It's okay, let the rock limbs be the reason of the system itself, and it has nothing to do with the computer.

The reason,Because all programs in win7 are not run as administrators by default,The advantage of this is that you can end the unresponsive programs at a faster speed,To avoid system stuck。 When a program does not enter the normal state quickly due to various reasons, it will not respond. The famous World of Warcraft card blue bar event is also for this reason, as the game is so big that it takes time to load.

Because your hard disk is not a solid-state drive, it is a common mechanical hard disk, and it is normal to have a sound, but based on the gurgling sound you said, you can't be sure if it's normal.

1 Short: The system starts normally. This is the majority of cases.

2 Short: General error, please go to CMOSThe setup and reset the incorrect options. It's as simple as reverting to the defaults, which works most of the time.

1 long and 1 short: There is an error with the RAM or motherboard. Try to change the memory, if it still doesn't work, you have to change the motherboard.

1 long and 2 short: errors in the monitor or graphics card. Unplug the monitor and graphics card, clean it up, and try it on the installation.

1 long and 3 short: The keyboard controller is wrong. Double-check the motherboard.

1 Long 9 Short: Motherboard FlashRAM or EPROM error, BIOS corruption. Try a different block of flashram.

Constant ringing (with long, intermittent sounds): The memory module is not plugged in tightly or damaged. If it still doesn't work, you can only replace a memory module.

Ringing: The power supply and monitor are not connected well to the graphics card. Check all the plugs.

Repeated, short ring: There is a problem with the power supply.

No sound and no display: There is a problem with the power supply. (It's just not powered on) or some parts of the motherboard are reimbursed!

2. amibios

1 Short: The memory refresh failed. Replace the memory module.

2 Short: The memory ECC verification error is incorrect. Setting the memory option for ECC check to disabled in CMOSSETUP will solve the problem, but the most fundamental solution is to replace a memory.

3. Short: The basic memory of the system (the first 64KB) failed to be checked. Replace the memory.

4 Short: The system clock is wrong.

5 Short: Processor (CPU) error.

6 Short: Keyboard controller error.

7 short: The real mode of the system is wrong and cannot be switched to protection mode.

8 Short: A memory error is displayed. If there is a problem with the video memory, try changing the graphics card.

9 Short: rombios test error.

1 long and 3 short: memory error. If the memory is damaged, it can be replaced.

1 long and 8 short: A test error is displayed. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.

Try to see what your machine is like, find the crux of the problem and solve your problem!

However, it is not ruled out that your machine has been infected with a virus, and your machine may have been infected with worms, and that kind of poison is difficult to handle.

If you don't have anything important in your computer, I suggest you redo the system! (You should be able to do this.,It's very simple) after redoing the system, the next anti-virus software will kill the poison all over the place.,It's really impossible to kill it, only delete all the data in the hard disk.,Repartition it.,Otherwise, the virus is very difficult**!

Buzzing words! Generally, it is whether there is a disc or a fan in the optical drive, and software problems rarely buzz! Hope it helps!

Let's see if there's a disk in the drive.