CD RW becomes CD R after burning it with nero

The answer is as follows:1 "After the burning is completed, the information of the disc is changed to CD-R", I would like to ask, before burning, check whether the information of the blank disc is CD-RW? When you burn the image to a CD, the disc information displayed by the program is for the existing burning result, so the original properties of the disc will no longer be displayed, the original attribute is CD-RW, but after burning into the finished product, the properties of the disc have changed, becoming an ordinary CD disc, so the program displays the disc information is of course a CD, this is a fact without doubt, are you right?

2 "I can't append data anymore" because you inadvertently selected the cap disc setting, and of course you can't append data anymore. If you want to add data in the future, you should set it like this: when you enter the "Burn Compile" step after adding the image file, delete the "End CD Write" in the "Operation" item, and then you can perform the rewrite function in the CD that you made.

3 "Erase disc is also not available (prompt CD-R cannot be erased)" is that you have set the function of nero incorrectly. The solution to this problem is as follows: when you need to perform the task of erasing the disc, on the main interface of the Nero program, click the third option button "Settings" in the bottom right row to open the settings panel, set the "Erase Disc" task in the "Tasks" bar, and set the "Nero Express" option in the open bar.

Then you can perform the task of erasing the disc.

Addition: You can use "Nero Express" instead of "Burning ROM" to perform disc erasing tasks, if that still doesn't work, it is recommended that you reinstall the Nero program.

With the Nero Express burning method, this is the new version of Nero integration and retains the advantages of the traditional Nero, this burning method is the traditional Nero burning form, which is easier to master, fast running speed, and the functions are similar.

Call the Nero Express method:

There is a small black arrow in the middle of the left edge of the main interface of the program, click on it to open a push-pull menu, and the third item that says "Applications" is the Nero Express program. If you can't use it anymore (which is what you call an older version of the feature), it's a problem with the program itself.

There is no way to rewrite it after burning with an image, just like a regular CD-R disc. Fortunately, CD-RW can be formatted.

Give it a try with the force erase disc tool in alcohol120%.

Open the nero software and there is a ** option. There is an **option on the left,Click on it and a **cd click will appear on the right,Add **format files,You can burn it。 Hand hit, hope to adopt!

Install the burning software Nero, select the option "Make Audio Disc", and burn the resulting CD. Audio files that can be dragged and dropped can be burned, and files that cannot be dragged and dropped cannot be burned.

1. Judging from your statement, your CD-R is engraved with an audio CD. And although I saw the file, there is only more than one k, this is just a shortcut, this is a measure to maintain copyright, in fact, there are many documents engraved inside!

2. If your disc is really not full, can you continue to engrave? It depends on the first time you burn it, and what method you choose! If you select "Allow multiple burns", you can continue to burn if the first time is not full!

If you do not select "Allow multiple burns" during the first burn, you will not be able to continue burning, no matter how much content is burned the first time.

3. Discs are generally disposable, and engraved discs can no longer be erased before continuing to be engraved.

Brother,Although that CD is 700M,But your disc is **CD,The file size is much larger than ***.,It's not the 1KB you see.,It's just a boot file.。 The real audio is hidden, and I guess your CD is already finished, so you can't write it a second time

You have to buy a blank disc engraving, which is not expensive, 3 yuan, and 700m.

It could be that your disc is already broken, try another one, or your recorder is not good.

Now there are many articles about Nero, but basically they are not practical enough, and even incomprehensible, here I have compiled a post for you on how to use Nero to burn**CD,I hope it will be helpful to the majority of computers and**enthusiasts。 :handshake This article takes this article as an example to describe the implementation steps:

1. Put the blank CD, there is a software icon on the desktop by default after the software socks are installed, and double-click to start the software.

2. The startup interface is as follows, here click the button "Nero Express" below.

3. The following interface is displayed, here click on the **Disc option on the right side of "**".

4. The following interface is displayed, click the "Add" button here.

5. Add the ** you want to burn in this step (it is not recommended to add too much, otherwise it is easy to be damaged, and it is advisable to burn the first one), click the next hail ruler step after adding.

6. You can enter the title of the disc, or you can leave it empty, "Write speed" because it is burning**, it should be as low as possible, it is recommended to use 8 times the speed. Click Burn.

7. After the burning is completed, the disc will automatically pop up. Normal use is fine.

Perfect**CD Burn:

Software: Nero (or other version) format factory (or other conversion software).

Hardware: CD *** Burner CD Blank Disc.

Method:1Open the "Format Factory" and convert all the original footage in different formats into "high quality", with a bitrate of 320kbps, 3 layers of compression, and save it in a folder for later use.

A CD can prepare about 18-20 songs.

2.Put a blank CD in the recorder tray (you can't use *** CD).

3.Open Nero and select "CD" in the disc category in the upper right corner.

4.Select Audio Make Audio Disc.

5.Click "Add". Find the folder saved on your hard drive, open it, select the audio material and click "Add". If the capacity indicator bar below appears red, it means that the added files exceed the allowed capacity of the disc, and you want to delete some files until no red appears.

6.Click blue on an audio file, hold the left button up and down to move down, adjust the order of the audio files. Click "Completed".

7.Tick the box before "normalize all audio files". Click "Next".

8.Select the current recorder, write speed, and number of copies burned.

9.Click "Burn".

Note:1To burn **CD discs, in most cases you can only use CD (or CD-RW) discs, not *** discs.

INFO: A new format ***-audio has now appeared. This format can be burned on the first disc in **cd format, the advantage is that it has a large capacity, can record multi-channel information, and due to the increase in recording density, it can also record **, images, text and other information.

However, you need a special ***-video burning software to burn. On the computer's optical drive, you need to have an independent sound card that supports the return of the video, software, etc. On the home ***, it needs to be a *** machine that supports ***-video discs**, which is not popular).

2.It is best not to exceed 6 times the burning speed, otherwise it is easy to have the problem of "stuck".

3.The first step of conversion is to unify the format and quality of the material, and it can be omitted. Due to the different materials, the format may also be different, even if it is a *** format, it is also divided into 2 layers of compression and 3 layers of compression.

Therefore, it is better to use conversion software to convert the format uniformly, and then add and burn it more securely.